EPSON L8050 Series Wi-Fi Ink Tank Photo Printer Instruction Manual

June 15, 2024
Epson

L8050 Series Wi-Fi Ink Tank Photo Printer

Product Information

Specifications

  • Ink Type: Not specified
  • Printer Setup Method: USB or Smart device
  • Charging Time: Approximately 7 minutes
  • Paper Size: A4

Product Usage Instructions

Handling Ink Bottles

The ink for this printer must be handled carefully. Ink may
splatter when the ink tanks are being filled or refilled with ink.
If ink gets on your clothes or belongings, it may not come off.

Filling the Ink Tanks

  1. Make sure that the color of the ink tank matches the ink color
    that you want to fill.

  2. Insert the ink bottle into the filling port for the correct
    color.

  3. Ink will start pouring and the flow will stop automatically
    when the ink reaches the upper line of the tank.

  4. If the ink does not start flowing into the tank, remove the ink
    bottle and reinsert it. Do not remove and reinsert the ink bottle
    when the ink has reached the upper line to avoid leaks or damage to
    the printer.

  5. The remaining ink in the bottle can be used later, but do not
    leave the ink bottle inserted for an extended period as it may
    cause damage or leaks.

  6. When the ink reaches the upper line of the tank, pull out the
    bottle.

Charging Ink

After filling the ink tanks, follow these steps to charge the
ink:

  1. Confirm that the tanks are filled with ink.

  2. Hold down the button for 5 seconds to start charging ink.

  3. Charging ink takes about 7 minutes.

  4. The printer’s LED status will indicate the charging
    process:

    • Off: Ink charging is complete.
    • Flashing: Ink charging is in progress.
    • On: Ink charging is complete, but the print head nozzles need
      to be checked.

Nozzle Check

After the ink charging is complete, a nozzle check pattern will
be printed. Check the printed pattern to see if the print head
nozzles are clogged.

Paper Loading

Load A4 size plain paper at the center of the paper support with
the printable side facing up.

Printer Setup Methods

If you have a smart device:

  1. Hold down the button until it flashes.
  2. Use your smart device to complete the rest of the setup
    process.

If you do not have a smart device:

Proceed to section 2 for further instructions.

Epson Smart Panel

Epson Smart Panel is an app that helps you set up the printer
and provides additional functionality. Follow these steps:

  1. Install Epson Smart Panel on your smart device.
  2. You can set up the printer while watching instructions on your
    smart device and remotely control the printer or perform more
    diverse printing through the app.

FAQ

Q: Can I use non-genuine ink with this printer?

A: Epson recommends using the ink bottles that came with your
printer. The use of non-genuine ink may cause damage that is not
covered by Epson’s warranties.

Q: What should I do with the remaining ink in the bottle?

A: If any ink remains in the ink bottle after filling the tank,
tighten the cap and store the bottle upright for later use.

EN Start Here TC

MN
© 2022 Seiko Epson Corporation Printed in XXXXXX

Read This First The ink for this printer must be handled carefully. Ink may splatter when the ink tanks are being filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.

. . .

2
Follow these instructions if you selected “No” in section 1 — C. 1 — C 1 — C “” .
A
B

Additional items may be included depending on the location. / / . The initial ink bottles will be partly used to charge the print head. These bottles may print fewer pages compared to subsequent ink bottles. / / . .
1
A

Make sure that the color of the ink tank matches the ink color that you want to fill. .
C

O When you insert the ink bottle into the filling port for the correct color, ink starts pouring and the flow stops automatically when the ink reaches the upper line.
O If the ink does not start flowing into the tank, remove the ink bottle and reinsert it. However, do not remove and reinsert the ink bottle when the ink has reached the upper line; as doing so may cause ink to leak or damage the printer when the ink rises above the upper line.
O Ink may remain in the bottle. The remaining ink can be used later. O Do not leave the ink bottle inserted; otherwise the bottle may be
damaged or ink may leak.
O
O
O O

O .
O , . , ; , .
O . .
O . .
F When the ink reaches the upper line of the tank, pull out the bottle.
.

K Confirm that the tanks are filled with ink, and then hold down the button for 5 seconds to start charging ink. Charging ink takes about 7 minutes.
5 7
, 5 .
7 .

Off. .

Flashing. .

On. .

Flashing. .

On. .

O The nozzle check pattern is printed. Check the printed pattern to see if the print head nozzles are clogged.
. .

L Load A4 size plain paper at the center of the paper support with the printable side facing up. A4 4 .

P

Q

B

USB

C Select the printer setup method. .
Do you have a smart device? ?

No. .

Go to section 2. 2 2- .

Yes.//.

Hold down the button until it flashes. Then use your smart device to complete the rest of the setup process.
. .

Epson Smart Panel
Install Epson Smart Panel. This will help you set up the printer even if you use the printer with a computer. Epson Smart Panel Epson Smart Panel . .

Epson Smart Panel
You can set up the printer while watching instructions on your smart device. By using the app, you can remotely control the printer on your smart device or perform more diverse printing through the app.
. .

O Remove the cap while keeping the ink bottle upright; otherwise ink may leak.
O Use the ink bottles that came with your printer. O Epson cannot guarantee the quality or reliability of non-genuine
ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties.
O O O Epson
Epson
O ; , .
O . O Epson
. Epson- .
D Check the upper line in the ink tank. .

If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use. , .
G
H

Upper line

E Insert the ink bottle straight into the port to fill ink to the upper line.

.

I

P Run the print head cleaning. Print head cleaning uses some ink from all ink tanks.
. .

M Press the button to turn off the printer. .

N Print a nozzle check pattern to check if the print head nozzles are clogged. .
While holding down , press to turn on the printer.
– .

L
Q Visit the website to install software and configure the network. When this is complete, the printer is ready for use. , . .
https://epson.sn/8050

J

Flashing alternately. .

On. .

Guide to Control Panel

Buttons and Functions
Turns the printer on or off.

Clears a network error. Hold down for 5 seconds or more to make network settings using the WPS push button.
Prints a network connection report to determine the causes of any network problems. To get more information, hold this button down for more than 5 seconds to print a network status sheet.
Stops the current operation. Hold this button down for 5 seconds until the button flashes to run print head cleaning.

PIN Code Setup (WPS): Hold down the

and

buttons simultaneously to start PIN Code Setup

(WPS).

Wi-Fi Direct (Simple AP) Setup: Hold down the and buttons simultaneously to start Wi-Fi
Direct (Simple AP) Setup.

Disable Network Service: Turn the printer on while

holding down the

button to disable Epson

Connect settings.

Restore Default Network Settings: Turn the printer on while holding down the button to restore the default network settings. When the network settings are restored, the and
lights flash alternately and then turn off.
Print Nozzle Check Pattern: Turn the printer on while holding down the button to print the nozzle check pattern.

Reading the Indication Lights

: Off

: On

: Flashing

Normal Status
The printer is connected to a wireless (Wi-Fi) network.

The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.

Error Status

Wi-Fi connection error has occurred. Press the clear the error and try again.

button to

No paper is loaded or more than one sheet has been fed at a time. Also, if this indicator light is on when printing a disc or PVC ID card, insert the disc/ID card tray correctly. After loading paper or inserting the disc/ID card tray correctly, press the button.
A paper jam has occurred or the disc or PVC ID card has not been placed on the disc/ID card tray correctly. After removing the paper or replacing the disc or PVC ID card, press the button. If a paper jam occurs, see the “Clearing Paper Jam” section. If the indicator light continues flashing, see the jammed paper section from “Solving Problems” in the User’s Guide.
Initial ink charging may not be complete. See section 2 on the front page to complete initial ink charging.
A maintenance box is nearing the end of its service life. The light continues to flash until the maintenance box is replaced. You can continue printing until the and lights flash alternately.
The printer was not turned off correctly. Press the button to clear the error. We recommend performing a nozzle check because the nozzles may have dried or clogged. To turn off the printer, make sure you press the button.
Flashing simultaneously: An ink pad is nearing or at the end of its service life. The ink pad needs to be replaced. Contact Epson or an authorized Epson service provider to replace the ink pad. Ink pads are not user-serviceable parts. Check the message displayed on the computer, and then press the button to clear the error or to continue cleaning. If the ink pad has reached the end of its service life, you can no longer perform cleaning. Printing can be performed but the quality of the printouts cannot be guaranteed. Flashing alternately: A borderless printing ink pad is nearing or at the end of its service life. Borderless printing is not available, but printing with a border is available. To replace the borderless printing ink pad, contact Epson or an authorized Epson service provider.
Transportation lock is locked. After unlocking the transportation lock, press the button.

Flashing alternately: A maintenance box is at the end of its service life. Replace the maintenance box, and then press the button to continue printing. To replace a maintenance box, see the User’s Guide.
The output tray has not been slid out. Slide out the tray.

All lights turn on except the light.
All lights flashing including the light.

The printer has started in recovery mode because the firmware update failed. For more details, see the error indicator table from “Solving Problems” in the User’s Guide.
A printer error has occurred. Remove any paper inside the printer. Turn the power off and on again. If the error continues to occur after turning the power off and on again, contact Epson support.

5 WPS
5

5

PIN (WPS) PIN (WPS)

Wi-Fi Direct (Simple AP) Wi-Fi Direct (Simple AP)

Epson Connect

:

(Wi-Fi)

Wi-Fi Direct (Simple AP)

Wi-Fi

PVC ID /ID /ID
PVC ID /ID PVC ID
2

Epson Epson Epson Epson

Epson

, .

. WPS 5 .

. 5 .

. 5 .

(WPS):

(WPS)-

.

Wi-Fi Direct ( AP) : Wi-Fi Direct ( AP)
.

: Epson Connect
.

:
.
, .

: .

:

:

:

(Wi-Fi) .

Wi-Fi Direct ( AP) .

Wi-Fi . .

.
.

, . PVC ID /ID .
/ID .

PVC ID /ID .
PVC ID .
” ” . ” ” .

. 2- .

. .
.

. . .
.

: .
. Epson Epson- . .
, .
. .
: . , .
Epson Epson- .

.
.

: . , . .

. .

.
” ” .
. . , . Epson .

Checking Ink Levels and Refilling Ink / /
Check the ink levels. If any of the ink levels are below the lower line, see steps A to I in section 2 to refill the tank. 2 A I
. 2- A­I .

To confirm the actual ink remaining, visually check the ink levels in all of the printer’s tanks. Prolonged use of the printer when the ink level is below the lower line could damage the printer.

. .

Ink Bottle Codes / /

For Europe / /

BK

LC

M

C

Y

LM

108

For Asia / /

BK

LC

M

C

057

Y

LM

Use of genuine Epson ink other than the specified ink could cause damage that is not covered by Epson’s warranties.
Epson Epson
Epson- Epson- .

Clearing Paper Jam / /
A

Troubleshooting / /
See the online User’s Guide for detailed information. This provides you with operating, safety, and troubleshooting instructions such as clearing paper jams or adjusting print quality. You can obtain the latest versions of all guides from the following website. . , , . .
https://epson.sn/8050
Support / /
For outside Europe / /
http://support.epson.net/ For Europe / /
http://www.epson.eu/support
Storing and Transporting / /
A
B

E
O Be sure to keep the ink bottle upright when tightening the cap. Place the printer and the bottle in a plastic bag separately and keep the printer level as you store and transport it. Otherwise ink may leak.
O When using the printer again after transporting, remove the tape securing the print head.
O If print quality has declined the next time you print, clean and align the print head.
O
O O O .
, , . . O . O , .

C B

C

D

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.

Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden.

: 5 .

AEEE Yönetmeliine Uygundur.

Ürünün Sanayi ve Ticaret Bakanliinca tespit ve ilan edilen kullanma ömrü 5 yildir.

Tüketicilerin ikayet ve itirazlari konusundaki bavurulari tüketici mahkemelerine ve tüketici hakem heyetlerine yapilabilir.

Üretici: Adres: Tel: Web:

SEIKO EPSON CORPORATION 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan 81-266-52-3131 http://www.epson.com/

The contents of this manual and the specifications of this product are subject to change without notice.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals