SEBSON 8W Mirror Wall Light LED User Guide
- June 15, 2024
- SEBSON
Table of Contents
SEBSON 8W Mirror Wall Light LED
Product Information
Specifications
- Product Name: MIRROR_WAL_8W 1
- Intended Use: Suitable for mounting on the wall or ceiling
- Protection Class: IP44 (suitable for use in damp rooms)
- Operating Voltage: 220-240V AC 50/60Hz
- Power: 8W
- Luminous Flux: 600lm
- Color Temperature: 4,000K
- Protection Class: II
General Safety Information
- The installation of this product should be done by a qualified person following the valid regulations for electrical installation.
- In case of damages or contact with water, turn off the product immediately and ensure that a restart is not possible.
- Keep the product away from children and animals to avoid suffocation. The packaging contains small parts that can be swallowed.
- Avoid directing the light beam directly at people or animals to prevent fire damage or eye damage. Do not look directly into the light source.
- Do not attempt to exchange the built-in luminous in the light as it is not possible.
- Modifying the product is not allowed as it may affect its proper and safe functioning and invalidate the warranty claim.
- Do not connect a dimmer to the product as it may cause damage to the lamp.
- Do not cover the light with heat-insulating materials as it may cause damage to the LED.
- Protect the product from external damage, heavy dirt, moisture, and excessive heat.
- Use only the supplied items to ensure the warranty claim does not expire.
- Repairs should only be done by an expert using original spare parts.
- Adhere to the accident prevention regulations of the professional trade association for electrical equipment and facilities in commercial institutions.
Installation Instructions (Fig 1)
Danger : Before installing, make sure that the circuit is interrupted! For installation, the work on the mains voltage should be carried out by a qualified person.
Cleaning
Danger: Before cleaning the product, interrupt the power circuit by turning
off the circuit breaker.
Contact Information
SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
Mail: support@sebson.de
UST-IDNr.:DE246981805
WEEE-Reg.-Nr.: DE 78960174
Batterien Reg. Nr.: DE 11339413
Verpackung Reg. Nr.: DE 4848624667044
FAQ
-
Can I install this product in a damp room?
Yes, this product has a protection class of IP44, making it suitable for use in damp rooms. -
Can I modify the product?
No, modifying the product is not allowed as it may affect its proper and safe functioning and invalidate the warranty claim. -
Can I connect a dimmer to this product?
No, connecting a dimmer to the product may cause damage to the lamp. -
How should I clean the product?
Before cleaning the product, make sure to interrupt the power circuit by turning off the circuit breaker.
Thank you for choosing a product of SEBSON. Read the instructions carefully and keep them looking up before starting this product. A long and failure-free operation can only be guaranteed if the installation and start-up is done properly. Before starting up this product, please check for external damage. In case of visible external damage, we immediately dis-advise the start-up of this product! Please remove all packaging material of this product before the first start-up and check the content for completeness!
Intended use
This mirror luminaire of the SEBSON brand is suitable for mounting on the wall or ceiling, for example. Due to its nature, it has a protection class of IP44 and is therefore suitable for use in damp rooms.
Scope of delivery
- 1 Mirror light
- 2 Screws and 2 Dowels (Ø 6mm) for fixing
General safety information
Danger : The installation of this product may be done only by a qualified
person according to the valid regulations for electrical installation!
Danger : In case of damages or contact with water turn off this product
immediately without tension and make sure that a restart is no longer
possible!
Danger of suffocation: Keep this product away from children and animals!
The packaging contains small parts that can be swallowed!
Caution: Please set up the light beam of the light never directly at
people or animals to prevent fire damage or eye damage and avoid looking
directly into the light source!
- An exchange of the built-in luminous in the light is not possible!
- The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
- Do not connect a dimmer as this may cause damage to the lamp.
- Do not cover the light with heat-insulating materials! As a result of a strong heat development, the LED can be damaged!
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of this product!
- Any other use than the description may result in damage to the product. So the dangers are such as electric shock, short circuit, fire etc.
- We reserve the right to make changes to the product, the packaging or the operating instructions as well as printing errors.
- Protect the product from external damage, heavy dirt, moisture and excessive heat!
- so that the warranty claim does not expire please use only the supplied items. Repairs may only be done by an expert and only by using original spare parts!
- In commercial institutions, the accident prevention regulations of the professional trade association for electrical equipment and facilities must be adhered to.
Instruction for installation
Danger : Before installing make sure that the circuit is interrupted! For
installation, the work on the mains voltage is required. Remove the associated
mains fuse or deactivate the switch fuse! Check by using a voltage tester if
the line is de-energized. Make sure that the current circuit will not closed
during the installation! There is danger to life here!
Attention: Before drilling the mounting holes, make sure that there are
no gas, electricity or water pipes at the drilling location that could be
damaged by this!
- This product is only suited for indoor-use and not for outdoor-use!
- Plan a minimum distance of 50cm between the illuminated area and the lamp.
- Observe the safety instructions and technical data before installing this product!
- Note on installation:
- L: Live wire (black or brown)
- N: Neutral conductor (blue or grey)
Technical Data
- Operating voltage: 220-240V AC 50/60Hz
- Nominal wattage: 8W
- Nominal luminous flux: 600lm
- Rated color temperature: 4.000K
- Electrical protection: IP44
- Protection class: II
- This product contains a light source of energy efficiency class G.
Information for private households
The Electrical and Electronic Equipment Act (WEEE) contains a large number of requirements for the handling of electrical and electronic equipment. The most important ones are summarised here.
-
Separate collection of waste equipment
Old, worn-out or defective electrical and electronic equipment is referred to as waste equipment. These devices must not be disposed of in the normal household waste or together with the residual waste. The devices should be transferred to special collection and return systems. -
Batteries and rechargeable batteries as well as illuminants
As a rule, owners of WEEE shall separate spent batteries and accumulators that are not enclosed in the WEEE, as well as light sources that can be removed from the WEEE without causing damage, from the WEEE before handing it over to a collection point. This does not apply if WEEE is prepared for reuse with the participation of a public waste management authority.
Batteries or rechargeable batteries that contain harmful substances are marked with the symbol of a crossed-out dustbin and must not be disposed of in household waste. Below the dustbin symbol is the chemical name of the pollutant – in the example below “Cd” for cadmium. “Pb” stands for lead, “Hg” for mercury:
If disposed of improperly, the substances contained in the batteries may cause hazards to health and the environment. The hazards are averted by the separate collection and proper disposal of used batteries
-
Options for returning old appliances
Owners of WEEE from private households can hand it in free of charge at the collection points of the public waste management authorities or at the take- back points set up by manufacturers or distributors. -
Data privacy notice
Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the end-of-life devices to be disposed of. -
Meaning of the “crossed-out dustbin” symbol
The symbol of a crossed-out dustbin regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.
Cleaning
Danger : Before start cleaning the product interrupt the current circuit
by switching off the circuit breaker or unscrewing the fuse! Use a slightly
moistened cloth for cleaning. In order not to damage the product, it is
essential to avoid water penetrating into the housing! Never clean the device
under running water! Do not use solvent-containing cleaner for cleaning.
SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund Germany
support@sebson.de
VAT-Nr.: GB179436663
WEEE-Reg.- ID.: 500617
Adress : SEBSON Sebastian Sonntag Walter-Behrendt-Str.10 44329 Dortmund
Germany
Mail: support@sebson.de
UST-IDNr.: DE246981805
WEEE-Reg.-Nr.: DE 78960174
Batterien Reg. Nr.: DE 11339413
Verpackung Reg. Nr.: DE 4848624667044
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>