LETSHUOER S12 Pro 14.8mm Planar Magnetic Driver Instructions

: June 15, 2024
: LETSHUOER

Table of Contents

LETSHUOER S12 Pro 14.8mm Planar Magnetic Driver
WEARING METHOD
Precautions
Warranty Clauses
Customer Support Channels
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LETSHUOER S12 Pro 14.8mm Planar Magnetic Driver

LETSHUOER-S12-Pro-14-8mm-Planar-Magnetic-Driver-
product

WEARING METHOD

Before putting on the earphones, please ensure both earpieces are connected correctly to the designated cables. lhe monitors should be worn as illustrated below for the best user experience.

STEP 1:
Connect the IEM and the cables as labeled with corresponding red or transparent connectors. Red for the right side and transparent for the left.
STEP 2:
Put on the left unit as illustrated.
STEP 3:
Put on the right unit as Illustrated.

WARRANTY & SERVICE INSTRUCTIONS

Dear Users:
Information and instructions as listed on this pamphlet should be follOI/Ved carefully this would ensure a smooth post-sales experience and secure your understanding of legal bindings between LETSHUOER and you.

Precautions

The Left and right earpieces are marked L and R respectively
IEMs are very meticulous electronics. Please refrain from striking. bumping, soaking or squeezing the earpieces excessively so as to not damage the internal components.
Earpiece plugs should not be pulled too hard in order to prevent damage to the connectors. When rem011ing the cable, please hold on to the plastic/metal lead instead of the cable.
For your personal safety, please do not use the earphones when driving, cycling, or crossing the street
Do not plug in the earphones into power outlets.
Please do not use the earphones for too long with sustained high-volume pressure. Doing so may permanently damage your hearing.
The filter nozzles can be blocked by earwax after an extended period of time. Please unclog it occasionally to ensure optimal performance of the IEM.
Please clean your earphones frequently and replace them if it needs to be to protect your hearing.
Children should be using this product under adult supervision as it is not a toy.

Product Genuity Verification
To verify if your earphones are genuine goods, access the website https://m3a.top/aspx/2003/sy/indel.html (or scan the QR code at the back cover of this pamphlet) and enter your 20-digit security code. During the verification process, please make sure the earphones’ color matches the ones on the website.

Warranty Clauses

After-sales service will be available when the end-user produces a legitimate retail invoice and warranty card.
Product replacement will only be accepted when inspections are completed by an approved LETSHUOER engineer. cables need to be intact, earphone chassis should be free of bl em is hes and not damaged.
This product is covered by a 12-month warranty upon purchase date.
This product is covered by a 7-day product replacement upon purchase date. should the earphone malfunction without user service and the chassis is free of blemishes and not damaged,
Only the earphone units are covered by this warranty, Accessories and gifts are not included.

Limitation of Service
Should one of the following situation listed below occur. LETSHUOER is not liable for repair or service:

Damages or malfunctions caused by shock, bump, drop, bend or other forms of mishandling.
Malfunction caused by opening up of the earpieces without written permission by LETSHUOER.
Malfunctions caused by storing the units in humid environments, in close proximity to strong magnetic sources or submersion under water.
Failure to provide proof of warranty, including the warranty card and invoice.