Keychron Q7 RGB Wired Custom Mechanical Keyboard User Manual

: June 15, 2024
: Keychron

Table of Contents

Q7 RGB Wired Custom Mechanical Keyboard
Fully Assembled Version
Q7 CUSTOMIZABLE KEYBOARD SPECIFICATIONS
Q7 MECHANICAL KEYBOARD OVERVIEW
DEFAULT KEY LAYOUT:
KEY DESCRIPTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Q7 RGB Wired Custom Mechanical Keyboard
User Manual

Q7 RGB Wired Custom Mechanical Keyboard

Q7 Keymap JSON file:
https://cdn.shopify.com/s/files/1/0059/0630/1017/files/q7_us_ansi_ver1.04.json.zip?v=1656659790
VIA Software for macOS:
https://github.com/the- via/releases/releases/download/v1.3.1/via-1.3.1-mac.dmg
VIA Software for Windows:
https://github.com/the- via/releases/releases/download/v1.3.1/via-1.3.1-win.exe
VIA Software for Linux:
https://github.com/the- via/releases/releases/download/v1.3.1/via-1.3.1-linux.deb
How to Use VIA on Your Keychron Q Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your- keyboard

Fully Assembled Version

Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
12x Gaskets (10 Installed and 2 in the Box)
5 Sets x Stabilizers
1 Set x Keycaps (PBT Double-shot)
1 Set x Switches (Gateron G Pro) Keychron Q7 RGB Wired Custom Mechanical
Keyboard - parts Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
12x Gaskets (10 Installed and 2 in the Box)
5 Sets x Stabilizers Keychron Q7 RGB Wired Custom Mechanical Keyboard -
parts2 Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key QUICK START GUIDE
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps. Keychron Q7 RGB Wired Custom Mechanical Keyboard -
parts4

Switch To The Right System
Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
The Layers
There are five layersof key settngs on the keyboard
The layer 0 is for the Mac system.
The layer 1 is or the Windows system.
The layer 2 is for the Mac Multimedia keys.
The layer 3 is for the Windows Multimedia keys.
The layer 4 is for the Function keys. If your system togele is switched to Mac, then the ayer 0 will be actvated. If your system toggle is switched to Windows, then the layer 1 vill be: activated.
Multimedia Key and Function KeyIn order to get Multimedia Key, you need to press fn1 and Key.
In order to get Function Key, you need to press fn2 and Key.
The Backiight
Adjust The Backiight Brightness
AdiustThe Backight speed
Waranty
The keyboard s highly customizable and easy to be rebuilt If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
WARRANTY
Watch The Building Tutorial On Our Website
If you are buiding the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
TUTORIAL
Facor Reset

Toubleshooting? Dot know whts g o with e keyboart?

Try factory reset by pressing fn1 +J +Z (for 4 seconds)
Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
Remove the space bar keycap to find the reset button on the PCB.
Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now wil enter DFU mode.
Flash the firmware with the QMK Toolbox.
Factory reset the keyboard again by pressing fn1 +J +Z (for 4 seconds)

Step by step guide can be found on our website

Q7 CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Specifications

Q7 MECHANICAL KEYBOARD OVERVIEW

Keychron Q7 RGB Wired Custom Mechanical Keyboard -
parts17

DEFAULT KEY LAYOUT:

LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac. Keychron Q7 RGB Wired Custom Mechanical Keyboard -
parts18 LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Windows. LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn1/MO(2) key. LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn1/MO(3) key. Keychron Q7 RGB Wired Custom Mechanical Keyboard -
parts21 LAYER 4: This layer will be activated when you press the fn2/MO(4) key. Keychron Q7 RGB Wired Custom
Mechanical Keyboard - parts22

KEY DESCRIPTION

Key Description

Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third Party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
Certain fn keys or multimedia keys does not work under Windows/Android mode.
Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.
Safety Precaution:
Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard.

Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China