Keychron Q5 Wired Custom Mechanical Keyboard Knob Version User Manual
- June 15, 2024
- Keychron
Table of Contents
Q5 Wired Custom Mechanical Keyboard Knob Version
User Manual
Knob Version
Q5 Wired Custom Mechanical Keyboard Knob Version
Q5 Knob Version Keymap JSON file:
https://cdn.shopify.com/s/files/1/0059/0630/1017/files/Q5_US_ANSI_Knob_V1.4.json.zip?v=1660096561
VIA Software for macOS:
https://github.com/the-
via/releases/releases/download/v1.3.1/via-1.3.1-mac.dmg
VIA Software for Windows:
https://github.com/the-
via/releases/releases/download/v1.3.1/via-1.3.1-win.exe
VIA Software for Linux:
https://github.com/the-
via/releases/releases/download/v1.3.1/via-1.3.1-linux.deb
How to Use VIA on Your Keychron Q Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your-
keyboard
Fully Assembled Version
Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (8 Installed and 8 in the Box)
6 sets x Stabilizers
1 set x Keycaps (PBT Double-shot)
1 set x Switches (Gateron G Pro)
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key 
Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (8 Installed and 8 in the Box)
6 sets x Stabilizers 
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key 
QUICK START GUIDE
If you are a Windows user, please find the appropriate keycaps in the box,
then follow the instructions below to find and replace the following keycaps.
-
Switch To The Right System
Please make sur the system toggle on the top left corner has been switched to the same system a5 your computer’s operating system.
-
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
-
The Layers
There are four ayersof key setings on the Keyboard. The layer 0 and ayer 1 are for the Mac system. The yer 2and ayer 3 ar for the Windows systen. If your system toggle s switched t0 Mac, then the layer 0 wil be activated. If your system toggle is switched to Windows, then the layer 2 will be actvated. Remember that if you are using it in Windows mode, lease make changes. to thelayer 2 nstead o the top ayer (the ayer 0) This s 2 common mistake people are makin. -
The Backiight
-
Adjust The BacKiight Brightness
-
Warranty
The keyboard s highly customizable and easy to be rebuilt. 1f anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
WARRANTY -
Watch The Building Tutorial On Our Website
If you are buiding the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
TUTORIAL -
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Try factory reset by pressing fn +) +Z (for 4 seconds)
- Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
- Remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now willenter DFU mode
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds)
- Step by step guide can be found on our website
Q5 CUSTOMIZABLE KEYBOARD SPECIFICATIONS
Specifications
Layout| 96%
Switch type| Mechanical
Width| 145 mm
Length| 390.5 mm
Front height| 20.2 mm (without keycaps)
Back height| 33.4 mm (without keycaps)
Front height| 30.9 mm (with OSA keycaps installed)
Back height| 42.8 mm (with OSA keycaps installed)
Keyboard feet height| 2.4 mm
Angle| 5.3 degree
Q5 MECHANICAL KEYBOARD OVERVIEW
DEFAULT KEY LAYOUT:
LAYER 0: This layer will be activated when your keyboard’s system toggle is
switched to Mac. 
LAYER 1: This layer
will be activated when your keyboard’s system toggle is switched to Mac and
press the fn/MO(1) key. 
LAYER 2: This
layer will be activated when your keyboard’s system toggle is switched to
Windows. 
LAYER 3: This layer
will be activated when your keyboard’’s system toggle is switched to Windows
and press the fn/MO(3) key . 
KEY DESCRIPTION
Key Description
Scr-| Screen Brightness Decrease
Scr+| Screen Brightness Increase
Bright-| Backlight Decrease
Bright+| Backlight Increase
Prvs| Previous
Play| Play/Pause
Next| Next
Mute| Mute
Vol-| Volume Decrease
Vol+| Volume Increase
RGB Toggle| Turn Backlight on/off
RGBMd+| RGB Mode Next
RGBMd-| RGB Mode Previous
Hue+| Hue Increase
Hue-| Hue Decrease
RGB SPI| RGB Speed Increase
RGB SPD| RGB Speed Decrease
MO(1)| Layer 1 will be activated when holding this key
MO(3)| Layer 3 will be activated when holding this key
Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS,
functionalities of third Party input tools may be affected while using the
keyboard. Please make sure your operating system and drivers are up to date.
Certain fn keys or multimedia keys does not work under Windows/Android
mode.
Functionalities of certain multimedia keys may be disabled due to
compatibility, versions, brands and drivers of Windows/Android OS.
Safety Precaution:
Keep the product, accessories and packaging parts out of reach of children to
prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5°F) or above
50°C (131°F) to preserve the lifespan of the keyboard.
Keychron, Inc.
Dover, DE 19901, United States
Find us at
https://www.keychron.com
[email protected]
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China