Goldair GPCT450 2000W Hot Plus Cold Ceramic Tower Fan Heater Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
GPCT450 2000W Hot Plus Cold Ceramic Tower Fan Heater
Instruction Manual
Operating Instructions
2000W Hot + Cold Ceramic Tower Fan Heater
Model: GPCT450
General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this heater. Covering this heater presents a
fire risk and will activate the safety fuse, permanently disabling the unit.
WARNING: Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own unless constant
supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
flammable material a minimum distance of 1 meter from the air outlet.
-
Use only the voltage specified on the rating label of the appliance.
-
Keep all objects at least 1 meter from the front, sides, and rear of the appliance.
-
This appliance is intended for household use only and not for commercial or industrial use.
-
Indoor use only.
-
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
-
Do not use the heater if it has been dropped or damaged.
-
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills. -
Always unplug appliances when not in use.
-
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
-
Do not use if there are visible signs of damage to the heater.
-
Never use the appliance to dry clothes.
-
Do not connect the appliance to mains supply until completely assembled and adjusted.
-
Ensure hands are dry before handling the plug or main unit.
-
Ensure the heater is on a flat, stable, heat-resistant surface.
-
Do not operate with the cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
-
Carry out regular checks of the supply cord to ensure no damage is evident
-
Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to a qualified electrical person for examination, electrical service, or repair.
-
Do not twist, kink, or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
-
It is recommended that this heater is plugged directly into the wall socket. Power boards are not rated to supply power to high-wattage appliances. · A correctly specified, undamaged extension cord may be used with this heater provided it is used in a safe manner.
-
Do not remove the plug from the power socket until the appliance has been switched off.
-
Do not remove the plug from the power socket by pulling the cord; always grip the plug.
-
Do not place a cord under the carpet or cover it with rugs or furniture. Arrange the cord so it cannot be tripped over.
-
Don’t place appliances on bedding or on the thick and long carpets where the openings may get blocked.
-
Switch off and use the handle provided when moving
-
Do not place the appliance close to a radiant heat source.
-
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
-
Do not sit on the appliance.
-
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
-
Do not operate in areas where petrol, paint or other flammable liquids are used or stored.
-
Do not use this appliance in the immediate surroundings of a bath, a shower, a swimming pool or other liquids.
-
The appliance must not be immersed in any liquids. · There are no user-serviceable parts installed in the unit.
-
Do not use the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
-
This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc are stored.
-
If your appliance does not work or is not working properly, contact the place of purchase or the Customer Services Team.
General Care and Safety Guide
The remote control supplied with this device uses a CR2025 coin-type battery.
DANGER IF SWALLOWED Keeps batteries out of reach of children. Swallowing may
lead to serious injury or death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room. Dispose of used
batteries immediately.
WARNING!
DANGER IF SWALLOWED Keeps batteries out of reach of children. Swallowing
may lead to serious injury or death in as little as 2 hours due to internal
burns. If swallowed, go straight to a hospital emergency room. Dispose of used
batteries immediately.
Components & Assembly
WARNING: Heater must not be used without base installed. The base has
been pre-installed by the supplier and is non-detachable.
Assembling Method:
- Take the machine out from the packaging
- Carefully place the unit on a stable surface in an upright position
- Remove all plastic packaging from the machine.
- Locate the remote control before throwing the packaging away.
Operating your Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 meter from the front, sides, and
rear of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING: Never leave this heater unattended. Ensure the heater is on a
flat, stable, heat-resistant surface. Once the heater is in a safe operating
position and all switches are in the off position, insert the power plug into
the mains outlet and switch it on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will
overheat the plug and socket and could result in fire.
Note: When the appliance is turned on for the first time, it may release a
slight odor or smoke. This odor or smoke is a normal occurrence caused by the
initial heating of the internal heating elements and should not occur again.
CONTROL PANEL
REMOTE CONTROL
HEATING MODE
Touch the icon to activate the low heating setting.
Another touch will activate the high heating setting
COOLING MODE
Touch the icon to activate the low cooling setting.
Another touch will activate the high cooling setting
OSCILLATION / SWING MODE
Touch the icon to activate the oscillation/swing function. Touch the icon
again to turn it off
TIMER MODE
Touch the icon to activate the timer mode. Touch the icon to increase the
timer and touch the icon to decrease the timer. Touch the icon again to
confirm the timer.
The timer is a 12-hour countdown timer.
ELECTRONIC THERMOSTAT (FOR HEATING MODE ONLY)
Touch the icon to activate the thermostat mode. Touch the icon to increase the
temperature and touch the icon to decrease the temperature. Touch the icon
again to confirm the temperature. When the room temperature reaches the preset
temperature, the heating function will cut off automatically. When the room
temperature is lower than the preset temperature, the low or high heating will
turn on automatically.
SAFETY DEVICES
This appliance has two protection devices:
- Tilt Switch – this will automatically turn the appliance off if the appliance is not in the correct operating position.
- Resettable Thermal Link – this will automatically disconnect the power to the appliance at a pre-set overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate what is causing the appliance to overheat.
- Thermal Fuse – this disconnects the appliance permanently in case of overheating. (It is nonresettable).
CAUTION: The heater generates heat during use. Proper precautions must be taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
- The heater requires regular cleaning to ensure trouble-free operation:
- Unplug the heater from the main supply before cleaning.
- Ensure that the heater has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
- Never use solutions such as petrol, thinners, or polishing agents.
- Ensure the heater is dry before plugging back into the mains supply.
- Do not attempt to dismantle the appliance.
- There are no user-serviceable parts. For service or repair, contact an authorized electrical service technician
Cleaning
This device requires regular cleaning to ensure trouble-free operation. Ensure
that the device is switched off from the supply mains before removing the
guard. Unplug the device from the mains supply before cleaning. Use a damp
cloth (not wet) to wipe the exterior of the device to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills. Ensure
the device is dry before plugging back into the mains supply.
Do not attempt to dismantle the device. There are no user-serviceable parts.
For service or repair, contact an authorized electrical service technician.
Proof of purchase To receive a warranty retain a receipt as proof of purchase.
(Refer to back of booklet).
SUPPORT AND TECHNICAL ADVICE
| Goldair – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz| Goldair – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
---|---|---
Three Year Warranty
Thank you for purchasing this Goldair Select product. Your product is
warranted against faults and manufactured when used in normal domestic use for
a period of three years. For non-domestic use, Goldair limits the voluntary
warranty to three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand, this warranty is additional to the conditions and guarantees
of the Consumers Guarantee Act (1993).
Goldair New Zealand
CDB Goldair PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz
Goldair Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLD AIR (1300 465 324)
www.goldair.com.au
Goldair Three-Year Warranty (IMPORTANT: Please complete and retain this
warranty card)
Name………………………………….
Address………………………………….
Place Of Purchase……………………………….
Date of Purchase………………………………………..
Name Of Product Attach a copy of the purchase receipt to this warranty
card…………………………..
Model Number…………………………………………………………………
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574, South
Morang, Victoria, 3752
www.goldair.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>