Goldair GCPF265 45cm Black Chrome Pedestal Fan Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
Instruction Manual
Operating Instructions
45cm Black Chrome Pedestal Fan
Model: GCPF265
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, sides, and rear of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
- If your appliance does not work or is not working properly, contact the place of purchase. Repairing work on the appliance by unqualified persons can cause serious risks to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, and clothing, away from the blade of the fan during operation to reduce the risk of injury to the person and/or damage to the unit.
- Switch off and use handles provided when moving.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, an undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place appliances close to a radiant heat source.
- Never operate in areas where petrol, paint, or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
- Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
- Never connect the appliance to the mains supply until completely assembled and adjusted.
- Never remove the plug from the power socket until the appliance has been switched off.
- Never remove the plug from the power socket by pulling the cord – always grip the plug.
- Never twist the kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in households and similar applications such as staff kitchen areas in shops, offices, and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments, and other residential type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary?
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Model No: PF0055
Item No: (GCPF265) Supply: 220-240VAC 50Hz
Wattage: SOW CLASS I
Approval No: U21740EA
MADE IN CHINA
QC Passed: PO#-WWYY
CUSTOMER SUPPORT
NEW ZEALAND PH: 0800 232 633
AUSTRALIA PH: 1300 465 324
Components
Assembly
B ody Assembly
Step 1 – Unscrew the ring and base locking screw from the pole.
Step 2 – Insert the pole through The hole in the center of the stand
base, and twist it into position.
Step 3 – Turn the base upside down with the pole facing the floor and
place the base weight support at the bottom of the stand base. Tighten the
base weight support to the stand base with the base locking screw.
Step 4 – Unscrew the tilt-lock nut from the motor unit.
Step 5 – Put the motor unit into the pole.
Reinsert and tighten the tilt-lock nut.
Fan Grill Assembly
Step 1 – Align the rear grill on the motor unit, then screw in the 4x
rear grill screws to secure it in place.
Step 2 – Install the blade onto the motor shaft by tightening the blade screw.
Step 3 – Centre the front grill by aligning the central logo so it is horizontal and parallel to the floor. Then, secure the front and rear grills completely together by snapping 5x grill clips into place.
Step 4 – Tighten the grill locking screw at the bottom of the rear grill.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.
WARNING Keep all objects at least 1 meter from the front, sides, and rear
of the appliance
Place the fan on a dry, level, and sturdy surface.
Ensure the speed control is at the off position before plugging the power cord
into the socket.
To operate the fan turn the speed control dial clockwise until desired wind
speed is achieved.
Fan control switch
The control switch positions are:
- 0 = Off
- I = Low speed
- II = Medium Speed
- III = High Speed
To activate the oscillation function, push down the oscillation pin on the top
of the motor. The fan will then oscillate until the pin is pulled back up.
Adjust tilt by turning the neck screw and tilting the body to the desired wind
direction (i.e. either upward or downward).
IMPORTANT! NEVER COVER THIS APPLIANCE!
Cleaning
The fan requires regular cleaning to ensure trouble-free operation.
Ensure that the fan is switched off from the supply mains before removing the
guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user-serviceable parts. For
service or repair, contact an authorized electrical service technician.
PROOF OF PURCHASE
To receive a warranty retain the receipt as proof of purchase. (Refer to the
back of the booklet).
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz| Goldair – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
One Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of one year. For non-domestic use, Goldair limits the voluntary warranty to
three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand, this warranty is additional to the conditions and guarantees
of the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
---|---
Goldair One Year Warranty (IMPORTANT: Please complete and retain this
warranty card)
Name————–
Address———–
Place Of Purchase————–
Date of Purchase————–
Name Of Product——————
Model Number————-
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>