EZCOO EZ-SW21H14-KVMU2 HDMI KVM Switch 2 Port 4K 30Hz KVM Switch User Manual
- June 15, 2024
- ezcoo
Table of Contents
EZCOO EZ-SW21H14-KVMU2 HDMI KVM Switch 2 Port 4K 30Hz KVM Switch
OVERVIEW
2-Port HDMI1.4 KVM Switch
The 2- Port HDMI1.4 KVM switch allows 2 HDMI ports to be switched to a single
display terminal. At the same time This kit help you control 2 signal sources
easily by only one set USB keyboard console, switching anytime via remote
control, buttons on unit. This HDMI1.4 KVM Switch supports video formats
including 720p, 1080i, 1080p, 4K/30Hz RGB4:4:4, 8bit. And All system of
Windows, Unix and Mac OS X. Compatibile with the BASIC wired/wireless
keyboard/mouse.
FEATURES
- Support HDMI1.4
- Supports highest video resolution 4K/30Hz 8bit, RGB4:4:4
- Support 3D
- Support 24/30/36 bit deep color
- Supports USB2.0
- Supports control by remote, buttons on unit
PRODUCT DIAGRAM
Package Accessories
- HDMI KVM switcher x1
- IR remote control x1
- User manual x1
- IR extender cable X1
- USB2.0 typeA to typeB cable X1
INSTALLATION
SPECIFICATIONS
| HDMI vertion | HDMI 1.4b |
|---|---|
| HDMI resolution | Up to 4K/30Hz RGB4:4:4 8bit |
| Support video format | 3D |
| Support video color format | 24/30/36 bit deep color |
| Support audio format | DTS-HD/Dolby-trueHD/DTS/Dolby AC3/DSD |
| USB version | USB 2.0 |
| Max working current | 500MA |
| Operating Temperature range | (-15 to+55oC) |
| Dimension (L x W x H) | 129.9×66.8×20 (mm) |
| Weight | 80g |
OPERATINT AND CONNECTING
- Connect HD signal sources into HDMI KVM switch input with 2 HDMI cables
- Connect 1 HDMI display source into HDMI switch output with 1 HDMI cable
- Connect sources device into HDMI KVM switch host ports with USB2.0 typeA to typeB cable
- Connect keyboard & mouse to any USB2.0 typeA port of HDMI KVM Switch
- Switching anytime via remote control, buttons on unit
USING TIPS
- Re-powering and unplugging the USB cable is a common troubleshooting method.
- Please use qualified or brand-new USB2.0 cable, make sure the cable is good.
- When connecting for the first time, please make sure that the computer is connected to the Internet, wait for 30 seconds, the device will automatically install the driver.
- It can work without power supply, If you connect high-current USB devices such as hard disks, cameras, etc., please find a 5V2A Mirco USB cable for power supply, such as an Android phone charger (Mirco USB cable not included)
- Press and hold the select button for 5 seconds to reset.
NOTES
Please use this machine based on below instructions to keep longer lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, fall.
- Touching the device with the wet hands is prohibited.
- Please turn power off when machine is not used for long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to
be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any
infringement of patents or other rights of third parties which may result from
its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies
that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no
commitment to update or to keep current the information contained in this
document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to
this document and/or product at any time and without notice.
CONTACTS
When you need any technical assistance, please send e-mail to
support@easycoolav.com
Visit to learn more.
https://www.easycoolav.com
- EZCOO TECHNOLOGY INC
- Email: support@easycoolav.com
- Website: https://www.easycoolav.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>