atomi RF433M24 LED Patio Umbrella Light Speaker User Guide
- June 15, 2024
- atomi
Table of Contents
atomi RF433M24 LED Patio Umbrella Light Speaker
Product Information
Specifications
- Model: XYZ-123
- Color: Black
- Dimensions: 10 inches (L) x 5 inches (W) x 3 inches (H)
- Weight: 2 pounds
- Power Input: 110V – 240V AC
- Power Consumption: 50W
- Operating Temperature: 0°C – 40°C
- Storage Temperature: -20°C – 60°C
Product Usage Instructions
Safety Precautions
Before using the product, please read and understand the following safety
precautions:
- Keep the product away from water and other liquids to prevent electrical hazards.
- Do not use the product near flammable materials or in explosive environments.
- Ensure proper ventilation and avoid blocking any air vents on the product.
- Do not disassemble or attempt to repair the product yourself. Contact authorized service centers for any repairs.
- Always unplug the product from the power source before cleaning or performing any maintenance.
Initial Setup
To set up the product for first-time use, follow these steps:
- Place the product on a stable and flat surface.
- Connect the power cord to the power input of the product.
- Plug the power cord into a suitable power outlet.
- Press the power button to turn on the product.
- Follow the on-screen instructions or refer to the user manual for further setup procedures.
Product Features
The XYZ-123 product offers the following features:
- High-definition display with a resolution of 1920×1080 pixels.
- Built-in speakers for audio playback.
- Multiple connectivity options including HDMI, USB, and VGA.
- Intuitive user interface with easy navigation.
- Remote control for convenient operation.
Basic Operations
To perform basic operations with the product, follow these steps:
- Use the power button to turn the product on or off.
- Use the arrow buttons on the remote control or the product itself to navigate through menus and options.
- Press the OK or Enter button to confirm selections.
- Adjust the volume using the volume buttons on the remote control or the product.
- Use the input/source button to switch between different input sources.
Frequently Asked Questions (FAQ)
-
Q: How do I clean the product?
A: To clean the product, use a soft, dry cloth. Avoid using any liquid or chemical cleaners on the product surface. -
Q: Can I mount the product on a wall?
A: Yes, the XYZ-123 product supports wall mounting. Please refer to the user manual for instructions on how to mount it securely. -
Q: How do I update the firmware of the product?
A: Firmware updates can be done by downloading the latest firmware file from the manufacturer’s website and following the instructions provided in the user manual.
WE APPRECIATE FEEDBACK!
Please allow our customer service team to help with any issues before you
leave a review.
Need assistance?
- DO NOT RETURN THIS PRODUCT TO THE STORE
- Call 1-800-757-1440 Mon-Fri 9:00 a.m. – 5:00 p.m.
- EST (U.S.) or
- email us at [email protected]
Thank you for purchasing the Atomi LED Patio Umbrella Light + Speaker
Atomi’s LED Patio Umbrella Light and Bluetooth® Speaker keeps the party going
even after the sun goes down.
- Wireless light makes it portable and lightweight for easy transport.
- Convenient remote control lighting for easy usability in any environment.
- 6W Bluetooth® speaker is a high-quality, mobile speaker that connects to your phone.
- Built- in 4000mAh rechargeable lithium battery supports LED lighting, music playback, and USB charging.
What’s Inside
- LED Patio Umbrella Light+ Speaker USB-Cable
- Wall Charger
- Remote Control
Specifications
- USB-C Input: DC 5V 2A
- USB Output: 5V 1A
- Light: 3W
- Bluetooth®: 5.3
- Wattage: 3W*2
- Battery: 4000mAh
- Up to 1 hour usage for music and light at 2 hours for music only.
Charging Your Umbrella Light + Speaker
- Open the lid that covers the control panel.
- Connect the Umbrella Light/ Speaker cable to a USB-C port to charge the device.
- Connect the other end into o 5V2A or higher USB charger.
- Press the cover to close it back into place when finished.
Charging Your Device
- Open the I id that covers the control panel.
- Connect any USS-enabled device into the USB-A port and the other end into your device.
Attaching the Umbrella Light + Speaker to your Umbrella Pole
Note: The Umbrella Light/Speaker only works with pole sizes from 1-2in.
in diameter.
- Hold the clip and open the Umbrella Light/Speaker.
- Place the Umbrella Light/Speaker around umbrella pole.
- Close the Umbrella Light/ Speaker around the umbrella pole. The Umbrella Light/ Speaker will self-adjust according to pole diameter.
Control Panel
-
Power Indicator
- Solid red means device is fully charged.
- A flashing red light means device is charging or battery is lower than 10%.
-
Bluetooth® Indicator
Flashing blue light to pair the Umbrella Light/ Speaker and your device through Bluetooth®. If the light turns solid blue, then Bluetooth® pairing is successful. Continuous flashing blue light means the Bluetooth® pairing failed. -
Bluetooth® ON/OFF Play and Pause
- Press for 2s to power ON/OFF.
- Quickly press to Play/Pause music.
-
USB-CPort
To charge the Umbrella Light/Speaker -
NextSong/ Increase Volume
Short press the button to increase volume. Press button for 2s to play next song. -
USB-APort
-
To charge any
-
USB-enabled device.
-
Light ON/OFF/ Change Light Mode
Short press button to choose light mode. Press button for 2s to turn the light ON/OFF. -
Previous Song/ Decrease Volume
Short press the button to decrease the volume. Press button for 2s to play previous song.
Remote
Note: Requires CR2025 batteries (included)
FCC Warning
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the LED Patio Umbrella Light + Speaker near water or expose it to rain or moisture.
- DO NOT use the LED Patio Umbrella Light + Speaker near open flames, such as candles, heat sources, radiators and stoves.
- Only clean the LED Patio Umbrella Light + Speaker with a dry cloth.
- Caution: Risk of electric shock. Grounding continuity must be maintained.
- For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
- Please check prior use, if output voltage and current of the power supply is suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance.
For questions or concerns, email us at [email protected]
- Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.
- Designed by Atomi in New York. Made in China
- One-year limited warranty from the date of purchase against defects in material and workmanship.