X-MEDIA XM-NA4810 Gigabit PCIe Network Adapter User Guide

: June 14, 2024
: X-MEDIA

Table of Contents

Package Contents
Chapter 1 Product Overview
Chapter 2 Installation Guide
Appendix A: Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Guide
1-Port 2.5GbE Gigabit PCIe x1 Network Adapter
Model No.: XM-NA4810

TRADEMARKS
MS-DOS, Microsoft, Windows 95/98/98SE/NT/2000/ME/XP/7/8/8.1/10/11 are trademarks of Microsoft Corporation Apple, Macintosh and Mac are trademarks of Apple, Inc.
*All other third-party brands and names are the property of their respective owners

Package Contents

The following items should be found in the package:

XM-NA4810 1-Port 2.5GbE Gigabit PCIe x1 Network Adapter
Low Profile Bracket
One CD Disk contains Drivers and User Guide

Note: The above list is for reference only. The actual content may differ according to the product you purchased. Please save the original packaging material for future reference. If any of the listed items are damaged or missing, please contact with your seller.
Conventions
The “Adapter” mentioned in this User Guide stands for XM-NA4810 without any explanations.

Chapter 1 Product Overview

1.1 Introduction
The Adapter, XM-NA4810 with Realtek RTL8125B chipset, it is a highly integrated and cost-effective single port 2.5G Gigabit PCIe Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az standards. This single-port 2.5Gbps PCIe Ethernet network card offers versatile and low-cost way to deploy 2.5GbE network connectivity. It is the easiest way to upgrade a network environment from 10/100/1000Mbps to 2500Mbps. It is suitable for multiple market segments and emerging applications, such as desktop, workstation, server, communication platform and embedded applications.
1.2 Features

Fully complies with IEEE 802.3, 802.3u, 802.3ab, 802.3bz standards
Compliant with PCI Express Revision 2.1
Support IEEE 802.1p Layer 2 Priority Encoding; IEEE 802.1q VLAN Tagging
Support IEEE 802.1Qav credit-based shaper algorithm
Support IEEE 1588v1, IEEE 1588v2, IEEE 80.2AS time synchronization
Support 2.5G and 1G Lite mode
Support Half/Full Duplex mode and 802.3x Flow Control
Support hardware ECC (Error Correction Code), CRC (Cyclic Redundancy Check), PCI MSI (Message Signaled Interrupt) and MSI-X
Support Wake-On-LAN and “Real Wow!” Technology (remote wake-up)
Support Jumbo Frame to 16K bytes
Auto-Negotiation with Extended Next Page capability (NXP)
Crossover Detection & Auto-Correction (MDI/MDI-X)
LED indicator for monitoring Link/Act
Support Standard and Low-Profile Chassis

1.3 LED Status
The Link/Act LED of Adapter indicates 10/100/1G/2.5G status. They will light when connection is built, and flashing when the Adapter is transmits and receive data.

X-MEDIA XM-NA4810 Gigabit PCIe Network Adapter - LED
Status

ACT (Flashing Green) / LINK (Solid Green) – 2.5Gbps
ACT (Flashing Green) / LINK (Solid Green) – 1Gbps
ACT (Flashing Green) / LINK (Solid Green) – 100Mbps
ACT (Flashing Green) / LINK (Solid Green) – 10Mbps

Chapter 2 Installation Guide

2.1 Hardware Installation
To Install the Adapter, please follow these steps listed below:

Turn off your computer and unplug the power cord and all cables
Remove your computer’s case cover
Locate an available PCIe slot
Remove the screw that secures the slot bracket (the small piece of metal that covers the opening for PCIe card on the back panel of your computer), then remove the slot bracket
Carefully insert the Adapter into the PCIe slot. Please avoid touching the gold connector of the Adapter
Secure the Adapter to the case by using the screw you removed from the slot bracket
Reinstall your computer’s case cover
Plug in the power cord and all other cables, and then turn on your computer

2.2 Software Installation
This section will guide you through the installation procedures for Windows 10. Please follow the steps.
2.2.1 For Windows 10 Installation

Insert the CD driver disk into CD-ROM drive. The Autorun setup program will display, or you click on the “Browse CD” to find other OS drivers in the CD.
Select Product Model folder in stall.
Select Windows folder, then click on Win10 folder to select Setup to install. Once Setup started, follow the on-screen instruction to finish the installation.
Restart computer to complete the installation.

Besides, you can also use the following way to update driver software:

Insert the CD driver disk into the CD-ROM drive.
Right click the icon Computer on the desktop, and then click Manage
The Computer Management screen will appear. Click Device Manager, and then you will see various options on the right side. Click Other Devices, and then from the drop-down list, please find Ethernet Controller. Right-click it and then select Update Driver Software.
The Update Driver Software window will show up. Select Browse my computer for driver software.
Browse and choose the system driver location from Computer, and then click Next.
Wait a few seconds for the installation.
Click Close to finish the installation.

Appendix A: Specification

Specifications:

Standards:| IEEE 802.3, 802.3u, 802.3ab, 802.3bz
Chipset:| Realtek RTL8125B
Interface:| 32-bit PCIe x1 Standard
1*10/100M/1G/2.5G RJ-45 port
Data Transfer Rate:| 10/100M/1G/2.5G
Network Media:| 10Base-T: UTP Cat. 3, 4, 5, cable (Maximum 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)
100Base-TX: UTP Cat. 5, 5e cable (Maximum 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)
1000Base-T: UTP Cat. 5e, 6 cable (Maximum 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)
2.5GBase-T: UTP Cat. 5e, 6 cable (Maximum 100m)
EIA/TIA-568 100Ω STP (Maximum 100m)
Jumbo Frame:| 16K Bytes
Flow Control:| IEEE 802.3x Flow Control (Full Duplex)
LEDs:| Link/Act
Operating Temperature:| 0° ~ 40° C (32° ~ 104° F)
Storage Temperature:| -40° ~ 70° C
Operating Humidity:| 10% ~ 90% Non-Condensing
Storage Humidity:| 5% ~ 90% Non-Condensing
Supported OS:| Windows Vista/7/8/8.1/10/11(32/64-bit); Linux
Windows Server 2008, 2012
Emission (EMI):| FCC; CE