X-MEDIA XM-NA4811 1 Port 2.5GbE Gigabit PCIe x1 Network Adapter User Guide
- June 15, 2024
- X-MEDIA
Table of Contents
User Guide
1-Port 2.5GbE Gigabit PCIe x1 Network Adapter
Model No.: XM-NA4811
For the most up-to-date information, please visit www.x-mediausa.com
TRADEMARKS
MS-DOS, Microsoft, Windows 95/98/98SE/NT/2000/ME/XP/7/8/8.1/10/11 are
trademarks of Microsoft Corporation Apple, Macintosh and Mac are trademarks of
Apple, Inc.
*All other third-party brands and names are the property of their respective owners
Package Contents
The following items should be found in the package:
- XM-NA4811 1-Port 2.5GbE Gigabit PCIe x1 Network Adapter
- Low Profile Bracket
- One CD Disk contains Drivers and User Guide
Note: The above list is for reference only. The actual content may differ
according to the product you purchased. Please save the original packaging
material for future reference. If any of the listed items are damaged or
missing, please contact with your seller.
Conventions
The “Adapter” mentioned in this User Guide stands for XM-NA4811 without any
explanations.
Chapter 1 Product Overview
1.1 Introduction
The Adapter, XM-NA4811 with Intel I225-V high performance controller chipset,
it is a highly integrated and cost-effective single port 2.5G Gigabit PCIe
Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u, IEEE
802.3ab and IEEE 802.3az standards. This single-port 2.5Gbps PCIe Ethernet
network card offers versatile and low-cost way to deploy 2.5GbE network
connectivity and support Intel vPro® technology on specific Intel platforms.
It is the easiest way to upgrade a network environment from 10/100/1000Mbps
to 2500Mbps. It is suitable for multiple market segments and emerging
applications, such as desktop, workstation, server, communication platform and
embedded applications.
1.2 Features
- Fully complies with IEEE 802.3, 802.3u, 802.3ab, 802.3bz standards
- Compliant with PCI Express Revision 3.1 (5GT/s)
- MDI(Copper) standard IEEE 802.3 Ethernet Interface up to 2.5Gb/s
- IEEE 802.1q VLAN Tagging
- Support IEEE 802.1Qav credit-based shaper algorithm
- Support IEEE 1588v1, IEEE 1588v2, IEEE 80.2AS time synchronization
- Support IEEE 802.3az – Energy Efficient Ethernet (EEE)
- Support Time Sensitive Networking (TSN) capabilities
- Support Half/Full Duplex mode and 802.3x Flow Control
- Support Wake-On-LAN
- TCP/UDP, IPv4 checksum offloads (Rx/Tx)
- Transmit Segmentation offloading (TSO) (IPv4, IPv6)
- Support Jumbo Frame to 9.5KB bytes
- Crossover Detection & Auto-Correction (MDI/MDI-X)
- LED indicator for monitoring Link/Act
- Support Standard and Low-Profile Chassis
1.3 LED Status
The Link/Act LED of Adapter indicates 10/100M/1G/2.5G status. They will light
when connection is built, and flashing when the Adapter is transmits and
receive data.
- ACT (Flashing Green) / LINK (Solid Orange) – 2.5Gbps
- ACT (Flashing Green) / LINK (Solid Green) – 1Gbps
- ACT (Flashing Green) / LINK (No Status) – 100Mbps
- ACT (Flashing Green) / LINK (No Status) – 10Mbps
Chapter 2 Installation Guide
2.1 Hardware Installation
To Install the Adapter, please follow these steps listed below:
- Turn off your computer and unplug the power cord and all cables
- Remove your computer’s case cover
- Locate an available PCIe slot
- Remove the screw that secures the slot bracket (the small piece of metal that covers the opening for PCIe card on the back panel of your computer), then remove the slot bracket
- Carefully insert the Adapter into the PCIe slot. Please avoid touching the gold connector of the Adapter
- Secure the Adapter to the case by using the screw you removed from the slot bracket
- Reinstall your computer’s case cover
- Plug in the power cord and all other cables, and then turn on your computer
2.2 Software Installation
Windows® Operating System
You must have administrator rights to the operating system to install the
driver.
- Insert the CD driver disk with Intel network driver into CD-ROM drive (also you can download the latest driver from support website).
- If the Found New Hardware Wizard screen is displayed, click Cancel.
- Start the Autorun located in the software package, it may automatically start after you have extracted files.
- Click install Drivers and Software.
- Follow the instructions in the install wizard to finish the installation.
Appendix A: Specification
Specifications:
Standards:| IEEE 802.3, 802.3u, 802.3ab, 802.3bz
Chipset:| Intel 1225-V
Interface:| 32-bit PCIe x1 Standard
| 1*10/100M/16/2.56 RJ-45 port
Data Transfer Rate:| 10/100M/1G/2.5G
Network Media:| 10Base-T: UTP Cat. 3, 4, 5, cable (Maximum 100m)
| EIA/TIA-568 1000 STP (Maximum 100m)
| 100Base-TX: UTP Cat. 5, Se cable (Maximum 100m)
| EIA/TIA-568 1000 STP (Maximum 100m)
| 1000Base-T: UTP Cat. Se, 6 cable (Maximum 100m)
| EIA/TIA-568 1000 STP (Maximum 100m)
| 2.5GBase-T: UTP Cat. 5e, 6 cable (Maximum 100m)
| EIA/TIA-568 1000 STP (Maximum 100m)
Jumbo Frame:| 9.5K Bytes
Flow Control:| IEEE 802.3x Flow Control (Full Duplex)
LEDs:| Link/Act
Operating Temperature:| 0° — 40° C (32° — 104° F)
Storage Temperature:| -40° — 70° C
Operating Humidity:| 10%— 90% Non-Condensing
Storage Humidity:| 5% — 90% Non-Condensing
Supported OS:| Windows 10 version 1809 and above/11(32/64-bit)
| Windows Server 2019, 2022
Emission (EMI):| FCC; CE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>