Uthfy HB-150R Infrared Heater User Manual

Uthfy HB-150R Infrared Heater User Manual

WARNING!

PLEASE DO NOT USE THIS PRODUCT IN THE VERTICAL POSITION
Please read these instructions carefully before using your new heater You have purchased a high quality, efficient and original Infrared Heater.We would like to express our gratitude to you for your appropriate choice and confidence in our company.Thank you for choosing our
Indoor/Outdoor Patio Heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.

IMPROTANT INSTRUCTIONS

When using this electric unit, basic safety precautions should be followed toreduce the risk of fire, electric shock, and injury to persons, including thefollowing:
Read all instructions before using the heater
Check whether your appliance and power cord are damaged beforeoperating your appliance.
Check whether there is any crack, disjoint or scratch on the filament(heating tube). If any, contact with your authorized technical service.
If you appliance or power cord is damaged, do not operate your applianceand return it to your technical service.
Check the safety of the network. The fuse must be 25A.
Do not use your infrared heater together with another appliance plugged tothe same multiple sockets or connected to the same fuse.Use your appliance with a properly earthed plug.
The earthed plug must fall outside heating field and hot surface.
The power cord must not be left on or around the frame of your infraredappliance.
. Unplug your appliance when you won’t operate it for a long term or willconduct cleaning or maintenance.
. The damaged heater glass must be exchanged.
. If the cable of the heater should be damaged, this may be replaced only bythe authorized service.
. If has to be notified that the mounting in the bath must be so that thepersons in the bath can not reach the controls.
. It has to be notified that the product has to be installed at a dry location andmay not be wet.
. Safe distances required for installation on the wall, high temperature andfire protection
Attention! The appliance must only be operated in a horizontal positionwith max+15°slope. In case of operations in angels larger than 5°in
horizontal position or of vertical operations, the heating loop wire may fallinto disuse shortly.
Never install your appliance on a combustible surface (carton etc.)
The distance of your appliance from the ground is to min 1.8 m (6 feet).The distance of your appliance from the ceiling is to be min 0.5 m (1.7feet).
The distance of your appliance from the corners to be installed is to be min0.5 m (1.7feet) and from the combustibles like curtains must be min 1 m3.5 feet).The distance of your appliance from the living beings is to be min 1 m (3.5feet).
The distance of heating area of your appliance from the materials such aswood, carton, cloth etc., must be min 1 m (3.5 feet).
Do not cover your appliance and do not hang any clothing over the heateror do not place any clothing on or near the appliance.
Do not stick anything into the protective grid.
Do not make use of your heater to light up cigarette or similar materials.
Supervision is needed when this product is used anywhere near children.
The appliance is not intended for use by children or other persons withoutassistance or supervision if their physical, sensory or mental capabilitiesprevent them from using it safely.
Do not place any objects such as furniture, papers, cloths, and curtains atleast 0.9m (3 feet) from the front of the heater and away from the sides andrear when the heater is plugged in.
Do not place the heater near a bed because objects such as pillows orblankets can fall off the bed and be ignited by the heater.
Always unplug the heater if it is not being used.
Avoid the use of an extension cord because the extension cord mayoverheat and cause a risk of fire. However, if you have to use an extensioncord, the cord shall be 1.5mm* minimum size .Do not operate within 7.6 m(25 feet) of flammable material.
Never block the front grill of the heater.
The heater is not suitable for hazardous locations.
Never attempt to service the heater without disconnecting its powersource.
The distance from bath tub, washbasin or other sanitary installationsYou may operate your heater in the bathroom and outdoors consideringthe items below:
The distance of your appliance from bath tub, washbasin or othersanitary installations is to be min 0.6 m (2 feet). The distance of 1 m(3.5 feet) is recommended for more safety.
The distance of the earthed plug from bath tub, washbasin or othersanitary installations must be min 0.6 m (2 feet).1 m (3.5 feet) distance is recommended for more safety.
Heater is not located immediately below a socket-outlet

Accessories Included

Installation Instructions

There are 4 brackets and fasteners used with the heater. Furthermore, in the canal of back side of the heater there are 4 square fastener washers Relieve square washers and fasten 2 brackets to the canal of the backside of the heater by the help of screws

Fasten the brackets at the appropriate distance of each other(45-55cm)

Two other brackets are fastened by the help of fasteners at the appropriate distance on the wall parallel to the floor(At least 1.8m (6 feet) from the floor and at least 0.5 m(1.7feet) from the ceiling).
Join the brackets on the heater with the brackets fastened on the wall, with help of figured screw-nuts.Install the heater under necessary angle(in the direction to the area being heated)

Safety Distances: Minimum distances required for safety

Installation Instructions with Right and Wrong Positions

DIRECT YOUR HEATER TOWARDS THE MOST APPROPRIATE ANGLE.
Do not let the light out through window, glasses etc. as the heater primaril heats the locations onto which its light falls.

Control Panel Steps for usage

These appliances must be supplied with proper voltage and frequency (AC120V, 60Hz), and connected to an individual, properly grounded branch circuit, protected by a circuit breaker which in accordance with wiring rule.
power cord of this appliance must be fastened with the chain, installation can only be carried out by qualified person in order to avoid a hazard.

1. When plugged in,turn on the Main power switch at the back of the Behind.

2. Press the on or off =~ button, the buzzer beeps, and the digital screen displays PO (standby

3. Press the mode – the first time, the buzzer beeps and the digital screen displays P1 (low power 500W).

4. Press the mode the second time, the buzzer beeps, and the digital screen displays P (mid-range power 1000W)
   .

5. Press the mode “2~ the third time, the buzzer beeps, and the digital screen displays P3 (High-grade power 1500W)

6. Press the mode -mode), cycle in tur ~ the fourth time, the buzzer beeps, and the digital screen displays PO (standby

7. Press the timing button O , the 1-24 hour timing shutdown can be adjusted arbitrarily, the digital screen displays 01 to indicate timing of | hour, and display 24 to indicate timing of 24 hours,cycle in turn.

8. Press the switch if you need to turn off the machine© ,and the main power switch on the back

Specifications

Remote control

The functions of the heater may be controlled via the buttons on your remote control and
LED screen. You may also control some of the functions of your heater through the buttons on the front side of the heater.

OVERHEAT PROTECTION

This heater is protected with an overheat protection that switches of the applianceautomatically in case of overheat.e.g. due to the total or partial obstruction of the grids.
In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the object which is obstructing the grids. Then switch it back on as described above. The appliance should operate normally. Should the problem persist, please contact the nearest customer service.

MAINTENANCE

Attention! Careful and regular maintenance of infrared Heater is required to attain a long and efficient operation of your appliance.
1- Check the cleanliness of the reflector and IR-filament at least once a month. If necessary, apply cleaning and maintenance instructions.
2- The number of checks may be increased considering the amount of the dust in the environment.
3- Check the deformation of the reflector, wire and frame visually while cleaning the appliance. In case of any deformation, consult a qualified technician.
4- Check the power cable and plug visually while cleaning the appliance. In case of any deformation, consult a qualified technician.
5- Itis recommended to change the reflector every 2 years for more efficient operation. Unplug your heater first Turn off the circuit breaker before maintenance and let the unit cool completely.

To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
+ DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.

• Although this heater is outdoor approved(Balconies and patios), DO NOT immerse the heater in water for your safety. Wait until the unit is completely dry before use.

STORAGE

If the heater will not be used for a long period of time, store it in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

Technical Service and TROUBLE SHOOTING

Attention!

Only technical services and persons authorized by may serve, repair and replace the spare parts of this heater.
If the heater will not operate, please check the following before seeking repair of service: Points to be considered before shipping the product to the technical service:

1.  Make sure that the plug, to which the appliance is connected, has power, check the fuse and power cord. If the plug lacks power, consult to an electrician.
2.  Make sure that the appliance has been installed in accordance with the instructions in the manual. If the installation is inaccurate, consult to technical service.

Terms of Warranty

Warranty by does not cover the defects arising out of the improper use the appliance. The warranty does not cover the situations below:

1.  The damages and defects arising out of improper use.
2.  The damages and defects having occurred during the transportation after the deliveryof the product to the customer by the company.
3.  The damages and defects arising out of low or excessive voltage, not grounded plug usage, faulty electricity systems, operating the appliance in different voltage values other than specified in the instructions.
4.  The damages and defects arising out of fire and lightening.
5. The damages and defects arising out of repairs and maintenance by persons other than Authorized Services.
6. The defects arising out of the breach of the instructions in the manual.
7.  The damages and defects arising out of the transportation of the product instead of repair.

Attention! Faulty maintenance and cleaning are not covered by the

warranty.

1.  The dust and polluters in the environment.
2.  Damage in the reflector or filament due to faulty cleaning.
3.  Faulty installation or dismantlement.
4. – Operating with damaged filament, frame or power cord.

Above mentioned defects and services are not covered by the warranty.
Should this product be proven defective in workmanship or material, the consumer’s sole remedies shall be such repair or replacement as provided by the terms of this warranty.
Under no circumstances shall be liable for any loss or damage, direct, consequential, or incidental, arising out of the use of or inability to use this product.
This symbol on the product or its packaging indicates that the appliance cannot be treated as normal domestic trash, but must be handed in at a collection point === for recycling electric and electronic appliances.
Your contribution to the correct disposal to the product protects the environment and the health of your fellow men. Health and the environment are endangered by incorrect disposal. Further information about recycling of this product can be obtained from your local town hall, your refuse collection service, or in the store at which you bought the product.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>