NGTeco NG-AD10 Compressed Air Duster User Manual Specifications Product Usage Instructions FAQ

: November 30, 2023
: NGTeco

Table of Contents

NG-AD10 Compressed Air Duster
Specifications
Product Usage Instructions
1. How to Use
2. Function Description
3. How to Charge
FAQ
Q: Can I use the product while it is charging?
Q: Why does the air duster stop working after a short period of
Q: How can I speed up the charging process?

NG-AD10 Compressed Air Duster

Specifications

Power Supply: DC 5V
Input Rated Power: 2 A 68 W
Full Charge: Red Light Glint
Motor Rotate Speed: 51000 to 91000 RPM
Charging Time: 3.5 to 4 h
Battery Working Time (Fully Charged): 20 to 35 min
Working Temperature: 14oF to 122oF (-10oC to 50oC)
Storage Temperature: -2oF to 140oF (-10oC to 60oC)
Noise: 80 dB
Material: ABS, PP
Cable Length: 31.5 in.
Weight: 450 to 500 g
Product Dimensions: 10163165 mm

Product Usage Instructions

1. How to Use

Note: When using pressurized air with an air nozzle for
inflation, it is important to open the air valve for quick
inflation. This is demonstrated below:

Open the valve with the tip of the air nozzle.
Release the nozzle from the nozzle hole and put it to the air
outlet.

2. Function Description

The item has 3 levels as follows:

Level 1
Level 2
Level 3

Note: To turn off the LED light, press and hold the switch for 2
seconds.

3. How to Charge

To charge the air dust collector, insert the USB cable into its
charging port.
Connect the other end of the USB cable to a 5V/2A USB outlet,
such as a USB charger, mobile phone adapter, laptop, or mobile
power supply.
To speed up the charging process, it is recommended to use a
5V/2A adapter.

Note:

It is not recommended to use the product while charging, as it
will not hold a charge while working.
If the air duster stops working after a short period of use,
ensure that the battery is kept fully charged. Additionally, avoid
storing the battery in a wet place, as this may shorten its
lifespan.

Tips: For faster charging, connect the cable to a 5V/2A USB
outlet, such as a USB charger or cellphone adapter. Please keep in
mind that using USB outlets with low output current may slow down
the charging process or prevent charging altogether.

FAQ

Q: Can I use the product while it is charging?

A: It is not recommended to use the product while charging, as
it will not hold a charge while working.

Q: Why does the air duster stop working after a short period of

use?

A: If the air duster stops working after a short period of use,
ensure that the battery is kept fully charged. Additionally, avoid
storing the battery in a wet place, as this may shorten its
lifespan.

Q: How can I speed up the charging process?

A: To speed up the charging process, connect the cable to a
5V/2A USB outlet, such as a USB charger or cellphone adapter. Using
USB outlets with low output current may slow down the charging
process or prevent charging altogether.

User Manual
Model: NG-AD10
Version: 1.0 English
Due to the regular upgrades of systems and products, NGTeco could not guarantee exact consistency between the actual product and the written information in this manual.

Important Notes
Points to note: 1. The product will run out of power and the working light will flash
to remind the user to charge it in time. 2. This machine uses a lithium-ion battery, which can be charged
on demand (but does not support charging from the side). You do not have to wait until the battery runs out before charging it. Keeping the battery charged at all times helps to prolong its life. 3. When the product is working, the fan blades will rotate at high speed. It is strictly forbidden to stick foreign matter into the product, otherwise the machine may be damaged. 4. If the working environment temperature of a battery exceeds 60°C or if the battery is squeezed or dissected, the battery life will be severely shortened, and there may even be a risk of leakage or explosion. 5. To ensure the effectiveness and service life of this product, please use the company specified accessories. 6. Due to product upgrades, the content of the document may be slightly inconsistent with the actual product. The document is for reference only, please refer to the actual product.
1

Table of Contents
What’s in the Box ————————————————-3 Product Overview ————————————————4 Operating Instructions——————————————5 Specifications——————————————————7
2

What’s in the Box

Electric Air Duster1
User Manual
Model: NG-AD10 Version: 1.0 English
Due to the regular upgrades of systems and products, NGTeco could not guarantee exact consistency between the actual product and the written information in this manual.
User Manual1

USB Cable1 Nozzle5

Brushes*3 3

Product Overview
Front:

LED Indicator Back:

Air Outlet Long Diameter Nozzle LED Light
Power ON/OFF

Type-C Charging Port

Battery Indicator

4

Operating Instructions
1. How to Use

Note: When using pressurized air with an air nozzle for inflation, it is important to open the air valve for quick inflation. This is demonstrated below:

Open

Pressurized air

Open the valve with the tip of the air nozzle

Release the nozzle from the nozzle hole and put it to the air outlet.

5

2. Function Description The item has 3 levels as follows: 1.
2.
3.
Note: To turn o ffthe LED light, press and hold the switch for 2 seconds.
3. How to Charge 1. To charging the air dust collector, insert the USB cable
into its charging port, then connect the other end to a 5V/2A USB outlet, such as a USB charger, mobile phone adapter, laptop, or mobile power supply. To speed up the charging process, we recommend using a 5V/2A adapter. 2. When the device is charging, the indicator light flashes red, and the indicator light is always on when it is fully charged. Note: l It is not recommended to use the product while
charging, because it will not hold a charge while working. l If the air duster stops working after a short period of use, it is recommended to ensure that the battery is kept fully charged. Additionally, it is important to avoid storing the battery in a wet place, as this may shorten its lifespan.
6

Tips: For faster charging, connect the cable to a 5V/2A USB outlet, such as a USB charger or cellphone adapter. Please keep in mind that using USB outlets with low output current may slow down the charging process or prevent charging altogether.

Specifications

Power Supply

DC 5V

Input Rated Power

2 A 68 W

Full Charge

Red Light Glint

Motor Rotate Speed

51000 to 91000 RPM

Charging Time

3.5 to 4 h

Battery Working Time (Fully Charged)