HOMEDEC 2 Way Shower Diverter Valve Brass Dual Functions Thermostatic Shower Instruction Manual
- June 14, 2024
- HOMEDEC
Table of Contents
Installation Manual
2-way 3-handles Thermostatic Shower Valve
Please do not hesitate to contact us with your questions,concens and/or
problems,we’re
here to help.
Customer Support:homedec-bath@foxmail.com
2 Way Shower Diverter Valve Brass Dual Functions Thermostatic Shower
IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761 « Phone
909-472-4100 * Fax
909-472-4244 +
www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body in which its
product certification system includes inspection and testing of samples taken
from the supplier’s stock or from the market or a combination of both to
verify compliance to the requirements of applicable codes and standards. This
activity is coupled with periodic surveillance of the supplier’s factory
and/or warehouses as well as the assessment of the supplier’s Quality
Assurance System. This listing is subject to the conditions set forth in the
characteristics below and is not to be construed as any recommendation,
assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.
Issued To:
KAIPING HUILIN SANITARY WARE CO., LTD.
BACK BLOCK, NO. 9, JIAXING SOUTH ROAD, SHUIKOU TOWN 529321 KAIPING ,
GUANGDONG, CHINA
Product:
Plumbing Fixture Fittings
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
File Number: 13257
Effective Date: August 2022
Products are certified to the following standard(s):
ASME A112.18.1-2018/CSA B125.1-18
Void After:
August 2027*
*This certificate is not evidence of current listing. To verify listing status, visit the IAPMO R&T Product Listing Directory at pld.iapmo.org
This listing period is based upon the last date of the month indicated on the
Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the
approval of the Product Certification Committee, or any evidence of non-
compliance with applicable codes and standards or of inferior workmanship, may
be deemed sufficient cause for revocation of this listing. Production of or
reference to this form for advertising purposes may be made only by specific
written permission of IAPMO Research and Testing, Inc. Any alteration of this
certificate could be grounds for revocation of the listing. This document
shall be reproduced in its entirety.
2 way 3-handled Thermostatic Shower Valve Installation Manual Accessory
list
| 29 | CX01A27 | Accessory Bag | / | 1 |
|---|---|---|---|---|
| 28 | CX01A17 | SeS304 Screw M5X6 | SUS304 | 2 |
| 27 | CX01A24 | Thermostatic Valve Body | Brass(A) | 1 |
| 26 | CX01A23 | Filter(Check Valve) | / | |
| 25 | CX01A25 | Thermostatic cartridge | / | 1 |
| 24 | CX01A08 | Sleeve ring(2) | HPb59-2 | 1 |
| 23 | CX01A05 | Socket Screw M5x18 | SUS304 | 1 |
| 22 | CX01A06 | Handle Wheel | HPb59-2 | |
| 21 | CX01A07 | Spring | SUS304 | 1 |
| 20 | CX01A29 | 0-ring | NBR | 5 |
| 19 | CX01A28 | Faceplate | HPb59-2 | 1 |
| 18 | CX01A10 | Plastic Hot Stop Circle | POM | 1 |
| 17 | CX01A04 | Temperature Handle Cover | ZnA14 | 1 |
| 16 | CX01A26 | Silicone plug | Silicone | 1 |
| 15 | CX01A01 | Handle wheel | HPb59-2 | 4 |
| 14 | CX01A02 | Socket Screw M5x5 | SUS304 | 5 |
| 13 | CX01A03 | Diverter Handle | ZnA14 | 4 |
| 12 | CX01A09 | Wear pad | PE | 4 |
| 11 | CX01A15 | Diverter cartridge | / | 4 |
| 10 | CX01A20 | Sleeve ring(1) | HPb59-2 | 4 |
| 9 | CX01A16 | Base(1) | HPb59-2 | 1 |
| 8 | CX01A11 | Stailess Steel Screw M5X10 | SUS304 | 18 |
| 7 | CX01A18 | Connector | RFH59-2 | 4 |
| 6 | CX01A14 | 0-Ring | NBR | |
| 5 | CX01A13 | 0-Ring | NBR | 16 |
| 4 | CX01Al2 | Connection Tube(2) | HPb59-2 | 4 |
| 3 | CX01A21 | Base (2) | HPb59-2 | 3 |
| 2 | CX01A19 | Connection Tube(1) | HPb59-2 | 1 |
| 1 | CX01A22 | Base plate | SUS304 | 1 |
| No. | Model No. | Name | Material | Qty. |
- Release the top 2 handwheel levers (b) counter-clockwise by hand to take offthe knobs. Next take out the hole plug (c) at the bottom of temperature handle, then use 2.5mn hex tool to release the screw (d) to take off hand cover.Remove and keep the black plastic circle (a) till the final finish of installation and temperature adjustment
- Turn off the water supply. Determine pipe length and depth.Set up the waterlines properly based on the actual condition.The above digram for plumber reference (Must pay attention-left is hot, right is cold.)
-
Hammer the 4 expansion screws into the holes.
-
Fix the vale body with 4 positioning screws
- Use copper sleeve wrench to tighten the screws.
- Connect the hot/cold inlets and outlets properly. Open the water supply to check and test, ensure there is no leakage or blockage at each connection.
- Temperature setting check. (DRotate the valve core clockwise or counterclockwise by hand to align the 2 marks on the valve core teeth (enlarged view A);@Attach the black gear ring on the valve core as picture directions (enlarged view B). ®lnstall the handle and plug as picture shows.
- Screw the handwheel into the handles.
** Precautions Before Installation **
Before installing the faucet, remove the debris and sludge in the water pipe
to prevent the debris from blocking the faucet and affecting the normal water
flow.
CLEAN THE PIPE
Something You May Need To Know
-
Confirm the alignment of the black or blue line on the valve body and the valve stem.
-
Confirm the placement of the black limit stop to be oriented with the open side facing right.
-
Confirm this part match with the plate print 38 degrees.
Product dimensions
Please take accurate measurement according to the actual installation.Diagram only for your reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>