HOMEDEC 2inch Brass Square Massage Shower Body Sprayer Jets Instruction Manual
- June 14, 2024
- HOMEDEC
Table of Contents
2inch
Brass Square Massage Shower Body Sprayer Jets
Instruction Manual
Installation Steps of Body Jets
- Attach the cover plate to body jets.
- Apply Teflon tape to threaded tail of the body jets.
- Use a wrench to screw the jet heads clockwis into the body spray outlets.
INSTALLATION STEPS:
- 1/2″ female pipe fitting recessed into the wall.(Wrap the nipple with Teflon Tape.)
- Set the decorative cover on the body jet.
- Roll the body jet onto the thread screws.
- Use a wrench to tighten 4 body jets on the water outlet holes.
- Turn on the water for testing.
NOTICE:
The female Nipple that comes with the body spray is removable. Please just
remove this Nipple and buy the new one (NPT1/2) with your desired length, if
your drop ear elbow is deeper in the wall.
If any quality problem occurs, please contact us through Amazon or homedec-
bath@foxmail.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>