Godox SL60IIBi 75W Bi Color LED Video Light Instructions

SL60IBi
Bi-color LED Video Light

Instructions Manual

Name of Parts

1.Handle
2.LCD Panel
3.CCT/RX Select Dial
4.FX Button
5.GR Button
6. Power Jack| 7.CH Button
8. Bluetooth Button
9.DIM Dial
10.Power Switch
11.Fixing Knob.
12.Sleeve| 13.Direction Adjusting Bracket
14.Reflector
15. Accessory Locking Ring
16.LED Beads
17.Bowens Mount
---|---|---

LCD Panel

1. Channel
2. Group
3. Light Effects
4. ID
5. Bluetooth
6. Brightness Adjustment Ratio
7. CCT Value.

What’s in the Box

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only.

Optional Accessories

The product can be used in combination with the following accessories sold separately, so s to achieve best photography effects: RC-A6 Remote Control, Softbox, Light Stand, etc.

Operation Instruction

1. Power Source
   Connect the LED light o power source wih power cable. Then, press the power swtch to turn it on/off.

2. Brightness Adjustment
   Turn the DIM dial to adjust brightness from 0% to 100%. Turn leftwards to decrease the brightness value by 1 unit while rightwards to increase by 1 unit with cuick adjustment available:

3. Color Temperature Adjustment
   In LED continuous lighting mode (FX icon will ot display), turn the CCT/FX select dial to adjust colar temperature from 2800K to 6500K. Turn the dial leftwards to decrease the CCT value by 100 unit while rightwards to increase the CCT value by 100 unit, with quick adjustment avaiable.

4. FX Mode
   Short press the FX button to enter or exitthe FX mode. When exiting the FX modes, FX icon will not be displayed on the LCD panel. While the FX icon wil be displayed when entering the FX mode. Then, turn the FX select dial to choose ane mode among the 11 special effects modes to achieve creative shootingDisplay| FX1| FX2| FX3| FX4| FX5| FX6| FX7| FX8| FX9| FX10| FX11
   ---|---|---|---|---|---|---|---|---|---|---|---
   Scene| Flash1| Flash2| Flash3| Storm1| Storm2| Storm3| TV| Broken
   bulb| Candle| Fire| Firework

5. 2.4G Wireless Setting
   5.1 Group setting: Short prss the GR button and the GR values wil be blnking on the display. Turmthe DIM il o adjust groups from 0 0.9 and A to F, turm the dial leftwards to decrease the value whil rightwards to increase. Then short press the GR Button again to exit from GR settng
   5.2 Channel setting: Short press the CH button and the CH values will be blinking on the display. Turn the DIM dial o adjust channels from 1 to 32, turn the dial leftwards to decrease the value while rightwards to increase. Then, short press the CH button again to exitfrom CH setting.
   5.3 ID setting: Long press the CH and GR button together unti the ID values is blinking on the display. Turn the DIM dial to adjust IDs from OFF and 1 to 99, tum the dial leftwards to decrease the value while rightwards to increase.  Then, long press CH and GR button again to exit from ID setting.
   

6. Bluetooth Setting
   6.1 Bluetooth MAC code checking: Short press the Bluetooth button once and the Bluetooth MAC code is displayed.
   6.2 Bluetooth reset: Long press the Bluetooth button untilthe Bluetooth icon is blinking because of resetting. And the icon will stop blinking in 4 seconds after being successfully reset.
   6.3 Connect to smartphone: Scan the QR code to download the ‘Godox Light” smartphone AP (can be used in Android and Apple). For more smartphone APP operations, please open the”help’ in AP to gain detailed guidance.

http://www.guteleben.com/html/dl_app/c_ble/GodoxLight/index.html

Note: The APP can be used cirectly on the fistlyinstalled device (smartphone or iPad). When change to other moble device (smartphone or iPad) the ight shall b reset before the normal connection of APP.

Failures Reminder

| lighting indicates fan failure.
---|---
| lighting indicates high temperature alarm
| flashing indicates failure.
| flashing indicates high temperature protection status and light automatically enters the shutdown procedure.

llluminance Data

Al the above tests are based on the condiion of 100% brightness.

Technical Data

2.4GHz
Transmission Distance| 30 meters
Bluetooth Transmission Distance| 30 meters
Brightness Range| 0%-100%
Working Environment Temperature| -10°C-40°C
Dimension
(unfolded without reflector)| 140mm236mm215mm
Net Weight| 1.5kg

‘Specification and design may subject to changes without notice.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This evice may ot cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

  Warning
Operating frequency:2412.99MHz — 2464.49MHz(2.4G only receive)/2402MHz – 2480MHz (BT)
Maximum EIRP Power: 9.33dBm

Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link:
https://Awww.godox.com/eu-declaration-of-conformity/

The device complies with RF specifications when the device used at 0mm from your body.

IC Warning
This device complies with Industry Canada’ s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller

Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (eg. promotional items, giveaways and additional accessories attached, etc) are not  included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty ard when buying the product

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid wartanty card, we may offer you maintenance service once confirmed that the product or accessory is invalved in the maintenance scape, but that shall ot be considered as our obligation

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

1. The product or accessory has expired its warranty period;
2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or  exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation,  addition and detachment;
4. The original identifying information of product or accessory is modified, alternated, or removed;
5. No valid warranty card;
6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released  software;
7. Breakage or damage caused by force majeure or accident;
8. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related  responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, locking device, package, power cord, sync cable, etc.| NO| Without warranty

Codor Aer-sae Senvies Cal 075529608320 6062

Wechat
Official Account

GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’ an District, Shenzhen
518103, China Tel: +86-755-29609320(8062) Fax:+86-755-25723423 E-mail: godox@godox.com
www.godox.com
Made in China | 705-SL62BY-00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>