MOES BJ12-221012 Dimmer Smart Power Plug Instruction Manual
- June 14, 2024
- MOES
Table of Contents
HOME, SMART MOES HOME
BJ12-221012 Dimmer Smart Power Plug
Instruction Manual Smart Power Plug
|
---|---
https://drive.google.com/drive/folders/1JXV1zGS_6rXzBeZBD13kTD0zlxZUdz0F?usp=sharing|
https://pan.baidu.com/s/1N6sxZhYYWmqLHukWNm-DJw?pwd=97wx
Description
This smart power Plug is compatible with Tuya platform for connecting to your home WiFi easily with no hub or network cable needed.Wireless control your home appliances in a smart way,such as brigtness adjusting of lamps,fans and etc.
Safety Information
Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.
Specification
Product Name: Smart Power Plug
Working Voltage: AC100V-240V 50/60Hz
Protocol: Wi-Fi 2.4G+Bluetooth
Working Temperature: -10~65℃
Rated Power (Resistive load): <200W
Support System: Android / iOS
Preparation for Use
1.APP Download MOES APP https://a.smart321.com/moeswz
MOES APP is upgraded as much more compatibility than Tuya Smart/Smart Life APP
functional well for scene controlled by Siri, widget and scene recommendations
as the fully new customized service.(Note:Tuya Smart /Smart Life APP still
works,but MOES APP is highly recommended)
2.Register Or Login Enter the Register/Login interface; tap “Register” to
create an account by entering your phone number to get verification code and
“Set password”. Choose “Log in”if you already have a MOES account.
Note:
The Plug only supports 2.4G WiFi network.If you have connected 5G WiFi
network,please disconnect 5G WiFi network firstly and connect 2.4G WiFi
network.
Add Device
Method One:
- Make sure your phone is connected to 2.4G Wi-Fi and the Bluetooth is enabled.
- Scan the QR code to configure the network guide.
Method Two:
- Make sure your phone is connected to 2.4G Wi-Fi and the Bluetooth is enabled.
- Confirm the device is ready for pairing mode(ON/OFF the power button for 6 times and hold on on the 6th time until the indication light flashes fast for app configuration.)
- Open Smart MOES App and Click“+”,then the prompt page will automatically show on the screen.Click “Add”. Enter Wi-Fi Password and click “Next”,waiting for the connection completed.
- Add the device successfully, you can edit the name of the device to enter the device page by click “Next”.
- Click“Done”to enter the device page to enjoy your smart life with home automation.
Equipment Operating Instructions
-
How to reset/re-pair Wi-Fi code
EZ mode: ON/OFF the power button for 6 times and hold on on the 6th time until the indicator light flashes fast for successful pairing/reset；
AP mode: ON/OFF the power button for 6 times and hold on on the 6th time under EZ mode until the indicator light flashes slowly to enter AP mode. -
How to ON/OFF manually
Manually “short press” the on/off button to turn on/off the device. -
How to manually dimmer
Plug the dimmable bulb onto the smart power Plug, and manually “long press” the on/off button to dimmer for brightness adjust, release your finger when the light intensity changes to the value you want.
When the brightness is with its maximum value under ON state,long press the ON/OFF button to dim the lights to the minimum value slowly, or release your finger to stop the intensity changing.
When the brightness is not with its maximum value under ON state, long press the ON/OFF button to lighten the lights to the maximum value slowly.
Enter MOES Skill In Alexa APP
-
Complete product network configuration in the App
Complete the device’s network configuration according to theprompts in the App. Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”. -
Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.) -
Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network.
-
Open the Alexa APP on your phone and log in.
-
tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo.
-
Choose your Amazon Echo device type and language for connecting.
-
Press and hold the small dot on the device until the light turns yellow.
-
Click “Continue” to connect to the hotspot, connect to the Amazon Echo hotspot, and return to the APP page.
-
Click “Continue” to find and connect to your home Wi-Fi network.
-
Amazon Echo will take a few minutes to try to connect to the network.
-
After the network connection is successful, tap “Continue”. An introduction video will appear，After the video ends，tap “Continue” to jump to the Alexa Home page.
-
You have now completed the Amazon Echo’s configuration process
-
Key step —— Link Skill
-
Tap on “Skills” in the Alexa App menu.
-
Then search for “App Name”. Tap “Enable” to enable the Skill.
-
Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey.
-
Common commands
Alexa, turn on/off bedroom light. (Turn on/off the light)
Alexa, set bedroom light to 50 percent. (Set the light to any brightness)Skill.
Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)
SERVICE
- During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
- Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty.
- Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party.
- Please keep this warranty card to ensure your rights.
- Our company may update or change the products without notice. Please refer to the official website for the updates.
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste
electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be
disposed of separately from unsorted municipal waste. To protect your health
and the environment, this equipment must be disposed of at designated
collection points for electrical and electronic equipment designated by the
government or local authorities.
Correct disposal and recycling will help prevent potential negative
consequences for the environment and human health.
To find out where these collection points are and how they work, contact the
installer or your local authority.
WARRANTY CARD
Product Information
Product Name
Product Type____
Purchase Date
Warranty Period__
Dealer Information_
Customer’s Name____
Customer Phone___
Customer Address___
Maintenance Records
| Failure date | Cause Of Issue | Fault Content | Principal |
|---|---|---|---|
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we will
try to meet your demand.
Follow us
MOES.Official
@moessmart
@moes_smart
@moes_smart
@moes_smart
www.moes.net
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road
Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
Maker:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation
Center, NO.238, Wei 11 Road, Yueqing Economic
Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After Service Email: service@moeshouse.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>