PXN V10 Force Feedback Steering Wheel User Manual

PXN V10 Force Feedback Steering Wheel

Product Information

Specifications

• Supported platforms: PC / PS4 / X-ONE / X-Series X|S
• Compatible computer operating systems: Windows 7 / 8 / 10 / 11
• Gear shift: 6+1
• Steering wheel rotation: 270/900 degrees switch
• Foot pedals: 3

Appearance

The PXN product features the following components:

• LED indicator
• A/ B/ X/ Y buttons
• Clutch Brake Accelerator
• D-pad
• Left paddle L1/ L2
• HOME button
• Right paddle R1/ R2
• Function buttons
• High and low gear switch
• Handbrake with LED indicator

Product Content

The PXN product package includes the following items:

• Steering wheel
• Foot pedal
• Gear shift
• RJ cable (for steering wheel and foot pedal)
• USB cable (for steering wheel and foot pedal)
• Power adapter
• Power cable
• Fixed bracket (x2)
• Allan screw (x4)
• Allan key

System Requirements

The PXN product is compatible with the following platforms and operating systems:

• Supported platforms: PC / PS4 / X-ONE / X-Series X|S
• Compatible computer operating systems: Windows 7 / 8 / 10 /11

Note: When playing on PS4 and X-ONE / X-Series X|S platforms, the original controller should be used for guidance.

Product Usage Instructions

Steering Wheel Installation

Assembling of Panel and Base

To assemble the panel and base:

1. Align the panel with the panel mounting position of the base.
2. Hold the steering wheel dial and tighten the locking ring.

Steering Wheel Fixed Instruction

To fix the steering wheel:

1. Place the steering wheel base in a proper position and install the clamp.
2. Use an Allen key to tighten the screws on the clamp and lock it in place.

Foot Pedals Installation

Panel Angle Adjustment of Foot Pedal

To adjust the panel angle of the foot pedal:

1. Use an Allen key to loosen and remove the 2 Allen screws.
2. Adjust the pedal to the desired angle.
3. Install and tighten the 2 Allen screws.

Pedal Strength Adjustment Instruction

To adjust the pedal strength:

Rotate the parts shown in the figure to adjust the pedal strength. Please ensure not to over tighten and adjust within the thread range.

Steering Wheel Tilt Adjustment Instruction

To adjust the tilt of the steering wheel base:

1. Use an Allen key to remove the screws shown in the figure.
2. Adjust the inclination of the base to the corresponding hole position.
3. Tighten the screws to secure the desired tilt.

Foot Pedal Fixed Instruction
To fix the foot pedal to the bracket:

There are 4 screw holes reserved at the bottom of the foot pedal to fix the pedal to the bracket by combining the corresponding screws.

Playing on PC

1. Connect the gear shift and foot pedals to the steering wheel.
2. Fix the steering wheel and connect it to the power adapter.
3. Plug the USB main cable of the steering wheel into the PC.
4. If successfully connected, the steering wheel will be in D-input mode by default, and the red indicator on the steering wheel will be always on.

Mode Switch While Playing on PC
The steering wheel is in D-input mode by default. Press and hold the button for 3 seconds to switch to X-input mode. If successfully switched, a purple indicator will be always on.

Recommended Games
D-input mode supports force feedback function (requires game support):

• Euro Truck Simulator 2
• Forza Horizon 5
• Assetto Corsa: Racing
• Dirt Rally 2.0
• F1 2020

No force feedback function in X-input mode:

• Forza Horizon 4 (Steam version)
• Spintires: Snowrunner
• Need for Speed: Heat Pursuit

FAQ

Q: What platforms are supported by the PXN product?
A: The PXN product is compatible with PC, PS4, X-ONE, and X-Series X|S platforms.

Q: What are the compatible operating systems for the PXN product?
A: The PXN product is compatible with Windows 7, 8, 10, and 11.

Q: How do I switch between D-input and X-input mode while playing on PC?
A: Press and hold the button for 3 seconds to switch between D-input and X-input mode.

Q: Which games support the force feedback function in D-input mode?
A: The recommended games that support force feedback in D-input mode are Euro Truck Simulator 2, Forza Horizon 5, Assetto Corsa: Racing, Dirt Rally 2.0, and F1 2020.

Q: Which games do not have force feedback function in X-input mode?
A: The games that do not have force feedback function in X-input mode are Forza Horizon 4 (Steam version), Spintires: Snowrunner, and Need for Speed: Heat Pursuit.

Thank you for choosing PXN products and your support for our brand, please read this manual carefully before starting to enjoy your gaming experience.

APPEARANCE

PRODUCT CONTENT

SYSTEM REQUIREMENTS
Supported platforms: PC / PS4 / X-ONE / X-Series X|S
Compatible computer operating systems: Windows 7 / 8 / 10 / 11

Note: Original controller should be used for guidance while playing on PS4 and X-ONE / X-Series X|S platforms.

BACK INTERFACE OF THE STEERING WHEEL
Back Interface Connection Diagram

STEERING WHEEL INSTALLATION INSTRUCTION

Assembling of Panel and Base
Align the panel with the panel mounting position of the base, hold the steering wheel dial, and tighten the locking ring.

Steering Wheel Fixed Instruction

Step 1 Put the steering wheel base in a proper position and install the clamp.

Step 2 Use an Allen key to tighten the screws on the clamp to lock the clamp.

Steering Wheel Tilt Adjustment Instruction
When in use, you can set the inclination of the steering wheel base with 4 gears.

Step 1 Use an Allen key to remove the screws shown in the figure.

Step 2 Adjust the inclination of the base to the corresponding hole position and tighten the screws.

FOOT PEDALS INSTALLATION INSTRUCTION

Panel Angle Adjustment of Foot Pedal

Step 1 Use an Allen key to loosen and remove the 2 Allen screws.

Step 2 Adjust the pedal to the desired angle, install and tighten the 2 Allen screws.

• Pedal Strength Adjustment Instruction
  Rotate the parts shown in the figure to adjust the pedal strength.
  Note: Please adjust the parts within the thread range.

• Foot Pedal Fixed Instruction
  There are 4 screw holes reserved at the bottom of the foot pedal to fix the pedal to the bracket by combining the corresponding screws.

INSTRUCTION FOR PLAYING ON PC

Step 1 Connect the gear shift and foot pedals to the steering wheel.

Step 2 Fix the steering wheel and connect it to the power adapter.

Step 3 Plug the USB main cable of the steering wheel to the PC.

Step 4 The steering wheel will be in D-input mode by default if successfully connected, and the red indicator on the steering wheel will be always on.

Mode Switch While Playing on PC
The steering wheel is in D-input mode by default. Press the “ ” button for 3 seconds to switch to X-input mode and a purple indicator will be always on if successfully switched.

D-input mode supports force feedback function (requires the game to support force feedback) Recommended games: Euro Truck Simulator 2, Forza Horizon 5, Assetto Corsa: Racing, Dirt Rally 2.0, F1 2020.

No forceback feedback function in X-input mode
Recommended games: Forza Horizon 4 (Steam version), Spintires: Snowrunner,Need for Speed: Heat Pursuit.

INSTRUCTION FOR PLAYING ON PS4

Step 1 Connect the gear shift and foot pedals to the steering wheel.

Step 2 Securely install the steering wheel and connect to the power adapter.

Step 3 Turn off the PS4 original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.

Step 4 Plug the USB main cable of the steering wheel into the USB port of the PS4 host, and turn on the PS4 host.

Step 5 Press the “ ” button of the steering wheel and the blue indicator of the steering wheel will be always on if connected successfully.

INSTRUCTION FOR PLAYING ON X-ONE/ X-SERIES X

Step 1 Connect the gear shift and foot pedal to the steering wheel.

Step 2 Fix the steering wheel and connect it to the power adapter.

Step 3 Turn off the X-ONE / X-Series X|S original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.

Step 4 Plug the steering wheel USB main cable into the USB port of the X-ONE / X-Series X|S host and power on the X-ONE/ X-Series X|S host.

Step 5 Press the “ ” button of the steering wheel and the green indicator will be always on.

STEERING WHEEL ADVANCED SETTINGS
Download the [ PXN Wheel ] APP on your mobile phone to get the advanced settings of the steering wheel. Main Functions of the APP:

•  Steering effective rotation degree setting
• Force feedback setting
• Button mapping setting
• Game preset button configuration
• Steering wheel button test

Scan the QR code to download the APP

PRECAUTIONS

•  Please read the manual carefully before using.
• Avoid strong vibration and gravity drop.
• Do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from getting into the product to avoid damage. Avoid storing products in some places with humid, high temperature,oily smoke, etc. Please use proper power while connecting and removing devices to avoid damage.
• Children can only use this product under the supervision of an adult.

PRODUCT SPECIFICATIONS

WARNING

Please read the manual carefully before using the product, and keep this manual for future reference.（WARNING）⸺ Electrical Safety

• Please connect, install and remove this product with proper force, don’t twist or pull the connectors and cables.
• Avoid getting water or other liquids on product or its connectors.
• Please keep the product in dry place and keep away from fire, don’t expose the product in humid conditions,high temperature or a dusty environment.
• Please use the power cable that comes with racing wheel, do not use any other power cables.
• Please don’t use the power cable if the cable or its connector is damaged, cracked, or broken.
• Please make sure the power cable is plugged into power outlet correctly, and connected to the port on the back of racing wheel base properly.
• Please don’t disassemble, refit or repair on your own. Any repairs must be carried out by the manufacturer, the authorized representatives or qualified technicians.
• Please use the attached system/ accessories specified by manufacturer only.
• If any unusual sound, heat or odor occurs with this product, please stop using it and disconnect the power cable from the power outlet and cut off other cables.
• If the product is not used for a long time, please disconnect the power cable from the power outlet, which must be located near the product and must be easy to plug and unplug the power cable.

The product can only be operated by users aged 16 or above.
Heavy Product !
Be careful not to drop the product on yourself or on anyone else !

（WARNING） ⸺ Possible injuries caused by force feedback and repetitive movements

To avoid possible injury caused by force feedback and repetitive movements, please take below advice for reference:

• Avoid lengthy gaming periods.
• Take a break of 10 to 15 minutes after each hour of using this product.
• If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, please stop playing and rest for a few hours before you start playing again.
• If the symptoms or pain indicated persist when you start playing again, please stop playing and consult your doctor.
• Please keep out of children’s reach.
• During gameplay, please always keep your hands in the steering wheel in the correct position, not placed at random.
• During gameplay, please never place your hands or your fingers under the pedals or anywhere near the pedal set.
• During calibration and gameplay, please never place your hand or your arm through the openings in the racing wheel.
• Ensure that the racing wheel base is secured according to the instructions in this manual.

WARNING

Ventilation
Make sure not to block any of the air vents on the racing wheel base. For optimal ventilation, please make sure to do the following:

• Keep the racing wheel base at least 10cm away from any wall.
• Do not place the base in any confined space.
• Do not cover the base.
• Do not let any dust build up on the air vents.

For safety reasons, please never use the pedal set with bare feet or while wearing only socks on your feet. PXN is not responsible for injuries caused by using pedals without shoes on.

（WARNING） ⸺ Pedal set pinch hazard when playing

keep the pedal set out of children’s reach.

• During gameplay, please never place your fingers on or anywhere near the sides of the pedals
• During gameplay, please never place your fingers on or anywhere near the pedal’s rear base.
• During gameplay, please never place your fingers on or anywhere near the pedal’s front base.

Automatic calibration of racing wheel
The wheel will automatically calibrate when you plug the racing wheel into a power outlet.
During calibration, the racing wheel will rotate 450 degree quickly towards the left and the right before stopping at the center.

WARNING :
To avoid improper calibration or personal injuries, please don’t touch the racing wheel during the auto-calibration.

Automatic calibration of the pedals
please always connect the pedal set before connecting the racing wheel to the device. Once the racing wheel’s calibration is completed and the game is started, the pedals will be automatically calibrated after a few presses.

WARNING :
please never press the pedals during the racing wheel’s auto-calibration or while a game is loading.

If the product is not functioning properly or is not properly calibrated
Power off your console or PC and completely disconnect the racing wheel. Then reconnect all cables
(including the power supply cable, pedal set and shifter), and restart your console or PC and your game.

For PXN Racing Wheels

1. Plug the Pedals into the pedals’ port on racing wheel with the registered jack connector cable.

2. The Pedals red indicator will remain ON when connection is successful, and the Pedals can be used now.

For PC

1. Plug the Pedals into PC USB port with the USB to USB-B cable. Plug the Pedals into PC USB port with the USB to USB-B cable.
2. The Pedals red indicator will remain ON when connection is successful, and the Pedals can be used now.
3. The value axis of Pedals correspond to clutch(X-axis)/ brake(Z-axis)/ accelerator(Y-axis).
   In the games of D-input category, the games will recognize both racing wheel and The pedals can be used by setting it in the games.

Installation

The Pedals Angle Adjustment

1. Loosen and get the two Allen key screws with Allen wrench.
2. Adjust the Pedals in a needed position and tighten the two Allen key screws

The Pedals Strength Adjustment

1. Rotate the component as shown to adjust the Foot Pedals’ strength.
   Note: Please rotate the component within screw thread.

Clamp the Pedals

1. Threws incudedicated screw holes for clamping the racing wheel on stand with the screws included.

Product Accessories

• USB to USB-B cable
• Registered Jack Connector Cable
• Allen key screw*4
• Allen wrench*1

Supported Platforms

• Support Windows 7/8/10/11
• PXN Racing Wheels: PXN-V10

Product Specifications

• Product Model  PXN-A3
• Connection Method  Wired
• Working Voltage  5V
• Working Current  ≤85mA
• Product Weight  About 3180 g
• Use Temperature  0-40℃
• Use Humidity  20~80%

Attention

• Avoid strong vibration and gravity dropping.
• Do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in humid, high temperature, oily smoke and other places.
• Please handle it gently when connect and remove the product.
• Children should be under adult’s supervision at all times when using this product.

For PXN Racing Wheels

1. Plug the Shifter into PXN racing wheel with male aviation plug to RJ11 registered jack cable.
2. The Shifter red indicator will remain ON when connection is successful, and the shifter can be used now.
3. Place the shifter horizontally in an appropriate position.
4. Rotate the screw cap to tighten the Shifter.

For PC

1. Plug the Shifter into PC USB port with male aviation plug to USB cable.
2. Thier can be dised or will remain ON when connection is successful, and the the thier man be Ded by sating the gae wil recognize both steering whel and shiter separataly.
3. Place the shifter horizontally in an appropriate position.
4. Rotate the screw cap to tighten the Shifter.

Product Accessories

• Male Aviation plug to USB cable*1
• Male Aviation plug to RJ11 registered jack cable*1
• Male Aviation plug to PS2 male cable*1

Supported Platforms

• Support Windows 7/8/10/11
• PXN Racing Wheels : PXN-V9/V10

Product Specifications

• Product Model
• Connect Type
• Working Voltage
• Working Current
• Product Weight
• Use Temperature
• Use Humidity

Attention

• Avoid strong vibration, do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in humid, high temperature, oily smoke and other places.
• Please do not throw the product into fire to avoid explosion.
• Children should be under adult’s supervision at all times when using this product.
• If you have any problems or suggestions about the product, please contact the seller or the after-services.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>