EKEN T8 Video Doorbell 1080p User Manual

June 4, 2024
EKEN

EKEN T8 Video Doorbell 1080p User Manual
EKEN T8 Video Doorbell 1080p

Features

  1. Motion Sensor

  2. Wide-angle Lens

  3. Hidden lnfrared Lights

  4. Light Sensor

  5. Microphone

  6. Doorbel! Button

  7. Indicator Lights

  8. Speaker

  9. Micro USB Port (Battery Charging)

Indicator Light

Indicator light flashing RED
The device is reconnecting to the Wifl network. Please wait.

Indicator light flashing RED   and BLUE alternately
 Low battery. Please recharge your batteries.

In the box

  • Video Doorbell

  • Tape

  • 2 Anchors

  • 2 Screws

  • User Manual

  • 2 Batteries
    (Optional)

  • Chime
    (Optional)

Charge batteries

  1. Remove the battery tab.

  2. lnsert 18650 batteries positive end facing down, as showr on the device.

Rechargeable 18650 Battery

  1. Fully charge batteries by connecting your device to a USB charger using a Micro USB cable. 11 takes about 14 hours for batteries to fully charge .

WARNING: Lots of events
lf your device is capturing an excessive number of events every day, you might need to recharge your battery sooner. Plus, the battery is also drained each time you use the Live View to look or speak through your doorbel. To prevent excessive events, you can ad just your motion settings to a lower sensitivity.

Set up your Video Doorbel!

Before You Start

  1. Download and install Aiwit App
    Scan the QR code below or search for Aiwit on the Apple App Store or Google Play. Download and install the app.

  2. Create an Aiwit account.

Aiwit

Android App Download
QR code

iOS App Download

Set up your device in the Aiwit app

To pair your device, follow the steps below and in-app instructions.

  1. Open Aiwit App and log in to your account
  2. To add your camera, select the + icon
  3. Select Video Doorbel!.
  4. Press and hold the Doorbel! Button until the red light is flashing, tap Next, then tap Yes.
  5. Enter your 2.4GHz Wi-Fi network and the Wi-Fi password, then tap Next (5GHz is not supported).
  6. Use your device camera to scan the QR Code shown on the app, then select Conflrm once the Wi-Fi setup has fmished.

4 inches (10 cm)

lnstall your Video Doorbel

Mark drill holes and use a bit to drill holes in your wall. lnsert anchors and secure your doorbel! with mounting and security screws

Step 1
Installation instruction

Step 2
Installation instruction

Set up your Wireless Chime (Optional)

Connect the video doorbel! to the doorbel! chime, and get instant alert in your home when someone rings the doorbel 1. The chime plugs into any wall outlet, you can place it anywhere in the home.

NOTICE:
The video doorbel! is only compatible with our wireless chime, and not compatible with traditional doorbell chimes. The wireless chime is optional. lf it is not installed, doorbel! notifications will still go directly to the Aiwit app.

The Basics

The Basics

Set up your chi me with the video doorbel!

Step 1
Before the setup process, be sure your video doorbel! has connected to your phone and plug in your chime.
Set up
Set up

Step 2
Press the Connect Button.

Step 3
Press the Doorbel! Button to pair your doorbel! to the chime.

Step 4
Press the Tune Button to cycle through 38 different tunes and select a tune.

Step 5
Press the Doorbel! Button again to make sure it’ s the tune you selected.

Frequently asked questions

How long do my videos stay in my account?

Your videos are stored in the Free Cloud for up to 7 days.

How to RESET the doorbel 1

Press and hold the Doorbel! Button for 8 seconds. Then follow the in-app instructions to finish your Wi-Fi setup.

How to share the device with my family

Open the Aiwit app. From the home page, tap the Share icon. Tap Share via Email or Share via OR Code. You can share the device with up to 8 users.

Share via Email

The new user has to download the Aiwit app and create an account with the same email address which the device owner has sharec with. Log in to the account and you’II see the shared device.

Share via OR Code

1. Open the Aiwit App on a new user’s smartphone.
2. From the home page, tap +.
3. Tap QR Code Sharing, then scan the OR code the device owner generatec before.
4. You will see Share successful, then tap Confirm

How many users can view the video at the same time?

Up to 3 users may view the video feed, but only 1 user can use the direct intercom. Both iOS and Android are compatible

Is 5GHz Wi-Fi supported?

No. Only 2.4GHz Wi-Fi is supportec

Why is my Wi-Fi signal poor on my device?

Your device may be toa far away from your wireless router or you may have some obstructions in between that reduce signal strength. You might try repositioning your router or gelling a signal extender/repeater for your wireless router.

How to adjust Motion Detection Sensitivity

From the home page, tap the Motion Detection icon.

Motion Detection Sensitivity

Fast: Records and notifles you about every motion. Shortest battery life.
Medium: Records and notifles you about motion less aften. Standerd battery life.
Slow: Records and notifles you about motion even less aften. Maximum battery life.

How to enable Notifications on my phone

To do this, you need to give permission for the Aiwit app to access to your microphone and enable notifications.
Follow these steps to enable notifications.
Open Settings. Go to Aiwit app permissions and select Notifications.
Make sure all switches are on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals