GIM GM3 Micro ATX Tempered Glass Panels Mini Tower Gaming PC Case User Manual

GIM GM3 Micro ATX Tempered Glass Panels Mini Tower Gaming PC Case

SPECIFICATION

ACCESSORY KIT

I/O INTERFACE

FULL VIEW

1. Panel stamping decorative block
2. Front panel glass
3. Left side glass
4. Left side glass hand screw
5. Right side panel
6. Hard drive cage
7. Top cover dust screen
8. Bottom dust screen

TEMPERED GLASS REMOVAL

Sweet Tips: Glass is fragile product, please take it off gently after you removed, especially to be careful of the corners were bumped

PANEL REMOVAL

POWER SUPPLY INSTALLATION

• Step 1: Open the right side of the board, the bottom of the power supply installation position.

• Step 2: Put the power supply into the bottom plate and align the position.

• Step 3: Lock in the screws from the rear window.

MOTHERBOARD INSTALLATION

Support MICRO ATX and MINI ITX Motherboard. (If you need to install ATX Motherboard, please choose our GM1 Mid Tower ATX Case).

HDD/SDD INSTALLATION

• Step 1: Please Remove the three hard drive cage screws before you removing the hard drive.

• Step 2: Install the SSD on top of the hard drive cage first, then screw the bottom hole.

• Step 3: Install HDD1 and HDD2 in the hard drive cage and lock in the screws on both sides.

GRAPHICS CARD INSTALLATION

WATER COOLING INSTALLATION

FANS INSTALLATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>