GIM KB-23 RGB Computer Cooling PC Case Fans User Manual
- June 5, 2024
- GIM
Table of Contents
GIM KB-23 RGB Computer Cooling PC Case Fans
Thanks for purchasing our GIM KB-Series Fans. Our product offers a competitive price and ultra-performance in cooling your pc, allowing you to create a fully DIY systematic illumination at the same time. Any problem please feel free to contact us
GIM KB Kit Contents
Five fan kit
- 5* Fans
- 1* Fan Hub
- 1* RF Remote
- 20* Mounting Screws
- 1 * VDG Cable
Three fan kit
- 3* Fans
- 1* Fan Hub
- 1• RF Remote
- 12* Mounting Screws
- 1 * VDG Cable
Single fan
- 1*Fan
- Mounting Screws
Installation
- Turn your system off prior to install your lighting Fan
- Mount the fan(s) to the location of your choice in the chassis
- Install the hub on the back of the chassis
- Contect the SATA power connector to any available SATA connector from your system power supply
RF Remote Instructions
Note: Please remember to pull out the insulating sheet before using the remote
- ON/Off
- Motherboard’ RF mode
- Light Speed-
- Brightness+
- Brightness-
- Red
- Musicmocle1
- FanSpeed-
- Mode+
- AUTO
- Modee White
- Green
- Musk:mode2
- FanSpeed+
- DIYMode
- Light Speed+
- ADDDIY
- DeleteDIY
- Blue
- Musk:mode3
- Motherboard RC mode: Motherboard Addressable SV ARGB / RC Mode switching
- DIY: Switch favorite mode
- LightSpeed-: in music mode, improve the sensitivity of the sound
- Light Speed+: in music mode, improve the sensitivity of the sound
- ADD DIY: Save favorite Mode
- Delete DIY: Delete favorite Mode
- White: Continue to press will have other colors
Specifications
| Fan Speed(RPM) | 0-1300 |
|---|---|
| Noise Level | < 26 |
| Air Flow(CFM) | 38.5 |
| Rated Voltage(V) | 5V-12V |
| Rated Current(A) | 0.26-0.48 |
| Rated Power(W) | 3.12-5.76 |
| Connector | 6Pin |
| Fan Size | 12012025mm |
| Wire length | 500mm |
FAQ and Solutions
- 1 or 2 fans don’t spin or light Please contact customer service for after-sales replacement
- The fan is humming Please check if the wires touch fan blades, if not, please contact customer service for after-sales replacement
- The Remote doesn’t work
- CD Please remember to pull out the insulating sheet before using the remote
- @ Please contact customer service for after-sales replacement
- All fans spin but the light keeps turning on and off This is the state of music mode 1, please switch the light mode
- One fan is too loud Please check if the wires touch fan blades, if not, please contact customer service for after-sales replacement
- How to keep the rainbow mode? First press “AUTO mode”—,,”MODE+”—,,Find the rainbow mode—,,”ADD DIY”—,,”DIY”
- How to know if the motherboard can synchronize the fan light? Please check on the official website of the motherboard brand to see if it has SV ARGB function and 3pin header
Attention
Do not connect the 3-Pin ARGB to the 4-Pin RGB heater of the motherboard, which will damage the fan lighting. If your motherboard has no RGB function, you do not need to connect the 3-Pin ARGB
Customer Service
- 12 months limited warranty
- Lifetime technical support
- service@gimgaming.com
Read User Manual Online (PDF format)
Loading......