APILDELLA 14 Inch Triple Laptop Screen Extender User Guide

APILDELLA 14 Inch Triple Laptop Screen Extender

Product Information

Specifications

• Product : APILDELLA 14” Triple Laptop Screen Extender
• Port Types: Thunderbolt 3, USB-C with DisplayPort, HDMI, USB-A
• Compatibility : Laptops with Thunderbolt 3, USB-C with DisplayPort, HDMI, and USB-A ports
• Power Requirements : Adapter (5V/2A or above) for stable power supply

Product Usage Instructions

Connecting with Thunderbolt 3 or USB-C with DisplayPort:

1. Check the ports available on your laptop and note the number and type of ports.
2. If your laptop has two Thunderbolt 3 or USB-C with DisplayPort ports, use the two included USB-C to C cables.
3. Connect one end of each USB-C to C cable to the Thunderbolt 3 or USB-C with DisplayPort ports on your laptop.
4. Connect the other end of each USB-C to C cable to the Video + Power port on the Tri-Screen. The Video + Power port is indicated by a specific symbol.

Connecting without Display Function (USB C):
Note : This is different from the Power Only port, despite having the same shape. The Power Only port is indicated by a battery symbol.

1. If your laptop does not have a Thunderbolt 3 or USB-C with a DisplayPort port, use the appropriate cables per screen.
2. For each screen, connect one HDMI video cable and one USB cable for power.

Using Apildella USB 3.0 to HDMI Adapter:
If your laptop has one HDMI port and two USB-A ports, you can use the Apildella USB 3.0 to HDMI adapter to convert one of the USB-A ports to an HDMI port.

1. Connect the Apildella USB 3.0 to HDMI adapter to one of the USB-A ports on your laptop.
2. Connect the HDMI cable from the adapter to the Apildella monitor.
3. Connect an external adapter (5V/2A or above) to power the side screen.

Frequently Asked Questions (FAQ)

Problem : No Signal or Go to Power Save Messages on Screen
If you are seeing these messages on one of the screens, try the following troubleshooting tips:

1. USB+HDMI Connection: Make sure each screen has both a video and power feed. If your laptop does not have a USB-C with DisplayPort or Thunderbolt 3 port, use 2 cables per screen (1 HDMI video cable and 1 USB cable for power).
2. USB-C Connection: If you are using a USB-C port on your laptop with a single USB-C to C cable for power and video, ensure that your laptop supports video over this USB-C port. Refer to your laptop’s online user manual for verification.
3. Apildella USB 3.0 to HDMI Adapter + USB+HDMI Connection: If your laptop does not have a USB C DisplayPort but has one HDMI and two USB-A ports, use the Apildella USB 3.0 to HDMI adapter to convert one of the USB-A ports to an HDMI port. Connect the HDMI cable to the Apildella monitor and use an external adapter to power the side screen.

Problem : Black Screen Even with Connected Cable
If the screen remains black after connecting the cable, it may indicate insufficient or unstable power from your laptop interface. To resolve this:

• Use an adapter (5V/2A or above) to supply power from an external source.

How to connect with APILDELLA 14’’ Triple Laptop Screen Extender
The combination of cables that you will use depends on the types of ports your laptop has. Take a look at your laptop and note which ports you have and how many.

Laptop Port Type (s)

• Thunderbolt 3 or USB-C with DispalyPort
• HDMI and USB-A
• 2*USB-A(USB3.0 and up)

Needed Cable(s) for one screen to function

• 1USB-C to USB-C cable
• 1*USB-A to USB-C cable (power)
• 1*HDMI to USB-C cable (video)
• 1*USB-A to USB-C cable (power)
• 1*HDMI to USB-C (video)
• 1*Apildella USB 3.0 to HDMI adapter

Notes: HDMI to C cable must be connected to the bottom of the Apildella monitor’s C port

1. USB-C with DisplayPort
   If your laptop has two Thunderbolt 3 / USB-C with DisplayPort ports, the simplest way to use the Tri-Screen is with the two included USB-C to C cables. You will plug one end of the cable into the Thunderbolt 3 port on your laptop and then plug the other end into the “Video + Power”  port on the Tri-Screen. This is the port with the following symbol:

2. USB C without Display Function
   Please note that this is different from the “Power Only” port, despite the fact that they are the same shape.

The “Power Only” port is indicated with a battery symbol.

Common Problem

“No Signal” or “Go to power save” messages are appearing on my screen

If you are getting a message on one of the screens that says “No Signal” or “Go to power save” see below for some troubleshooting tips!

USB+HDMI Connection

• Make sure that you have BOTH a video AND a power feed going to each screen. Unless your laptop has a USB-C with a Display port or a Thunderbolt 3 port you will need to use 2 cables per screen to it to function. (1 HDMI video cable and 1 USB cable power)

USB C Connection

• If you are using a USB-C port on your laptop along with a single USB-C to C cable for power and video, make sure that your laptop supports video over this USB-C port. (Please reference your laptop’s online user manual to verify.)

Apildella USB 3.0 to HDMI adapter+USB+HDMI Connection

• If your laptop does not have a USB C DisplayPort but has one HDMI and two USB-A ports, you can use the Apildella USB 3.0 to HDMI adapter to convert one of the USB-A ports to an HDMI port and connect it to the Apildella monitor, and then connect an external adapter to power this side screen. In other words, each screen is connected using USB+HDMI cables.
• I have connected the cable to the screen and the screen is still black.
  If the screen is still black even with the cable connected, the power from your laptop interface is not enough or stable for the product. In order to make it work well, please use an adapter (5V/2A or above) to supply the power from outside.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>