AHEONLAR ZWJ-T90-4L 4 Tier Storage Shelving Instruction Manual
- July 9, 2024
- AHEONLAR
Table of Contents
AHEONLAR ZWJ-T90-4L 4 Tier Storage Shelving Instruction Manual
Exploded Drawing
Component List
Supplied Parts and Hardware
SAFETY INFORMATION
- Please read and understand this entire manual before attempting to assemble or install the product.
- Two adults required for a safe assembly
- Do not allow children to climb or play in or around the shelves.
- Each shelf holds up to 350 lbs.. evenly distributed.
- Assemble on a soft surface, such as carpeting, to avoid scratching the finish.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 25 minutes.
Helpful Tools (not included): Rubber mallet.
- Decide on the shelf location before beginning the assembly. Once the product is assembled, it is very difficult to move a shelf without taking the entire assembly apart and starting over.
CARE AND MAINTENANCE
- Never use abrasive or acid•based cleaners on the shelf rack. • Clean shelves and poles with a solution of mild detergent and water. Use a soft cloth or sponge to wipe pans. Rinse and dry thoroughly.
- Keep surfaces dry and clean for a longer lasting finish.
Step 1
Attach two spacers (D) on each lower pole (C), ensuring they are all level and
that the arrows on the spacers (D) point upward.
Place the lower poles (C) through the corner holes of one shelf (A),then push
down on shelf (A) to ensure it is securely over the spacers (D). Once the
first shelf (A) is installed, use preassembled levelers on the bottoms of
lower poles (C) to level the item at the desired final location.
Step 2
Repeat step 1 for the second shelf (A) as desired.
Step 3
Step 4
Repeat step 1 for the third and fourth shelf (A) on upper poles (B) as desired.
Step 5
NOTE: This step is REQUIRED to ensure the stability of the item. Using a
pencil (not included) through the top shelf (A), mark the screw hole
locations, then set the item aside (with the help of another person).
Using a 1/4-in. drill bit (not included), drill a 1/4-in.pilot hole at marked
locations. Insert anchors (2) into the holes, then move the item back into
position. Insert the screws(3) through washers (1) and the shelf (A),then into
the anchors (2).
Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>