Fitkit FT100M Series DC Motorized Treadmill User Manual
- June 14, 2024
- Fitkit
Table of Contents
Fitkit FT100M Series DC Motorized Treadmill User Manual
Note: Following the principles of sustainable development, we may modify machines when necessary and will not notify again. It all depends on the actual product.
Always choose a Treadmill that can support at least 20 more kilograms of weight than your current weight since the impact weight increases during running and walking.
Product Brief – Model: FT100M
Main parameters and parts list
Main technical parameters
No.| Parameters Names| Description
1| Input power voltage| AC220-240V(50~60Hz)
2| Power| 3.25HP
3| Speed| 0.8-14.8Km/h
4| Running surface| 1240420 mm
5| Max user weight| 110KG
6| Expand dimensions| 1615680*1270 mm
7| Functions (Option)| Running (Sit up, Dumbbell, Massager)
Packing list
No.| Name| Units| Qty|
1| Complete machine| Set| 1|
2| Sit up/dumbbells/massager/Twister| Set| 1|
3| Accessory Bag| Pc| 1|
4| Frame of Multi-function| Pc| 1|
5| Frame pipe of Massager| Set| 2|
Tools Bag
No.| Name| Qty| No.| Name| Qty
1| Inner Hexagon spanner 6mm| 1| 7| Audio cable| 1
2| Inner Hexagon spanner 5mm| 1| 8| Screws M822| 4
3| Combination wrench| 1| 9| Screws M845| 2
4| Safety Key| 1| 10| Washerφ8| 2
5| Silicone oil| 1| 11| Nut M8| 2
6| User’s manual| 1| 12| Screw M825| 2
Multi-function model accessory
1| Screws M840| 4| 6| Screws M8*55| 2
2| Nut M8| 6| 7| Washerφ8| 6
3| Massager pipe| 2| 8| Dumbbells| 2
4| Foam| 4| 9| Multifunction frame| 1
5| Massager| 1| | |
Security Precautions and Warnings
Tips: Before folding the treadmill, make sure that the gradient is “zero”
Notice: : Please read the instructions carefully before use
- Indoor using and storing the treadmill, avoid dampness, and do not spill water.
- Please wear suitable clothes and sneakers before exercise. Please do not exercise on the treadmill barefoot.
- High power plug must be grounded, electric outlet should have a dedicated circuit, do not share with other electrical equipment.
- Keep children away from the machine to avoid accidents.
- Avoid long and overloaded operations, otherwise will cause motor and controller damaged, and will accelerate the deterioration of bearing, running belt and running board. Should maintain machine on a regular basis.
- Keep machine away from dust to avoid strong static.
- Please cut the electric power off after using.
- Please maintain good ventilation when running.
- Please clamp security lock cable on your clothing to make sure the machine stops at emergencycondition.
- If you feel not very well when using this machine, please stop and consult a doctor.
- Silicone oil must be kept away from children after use.
Forbidden
- If power cord is damaged, please contact our qualified maintenance personnel for service rather than assembling it yourself.
- Always choose a Treadmill that has user weight capacity at least 20 Kgs more than your current weight since the impact weight increases Forbidden
- Don’t use the machine in the status of the shell break or break off （the internalstructure exposed）
- Don’t jump up and down in the process of movement.
- Don’t keep machine in or near moist space such as the bathroom.
- Don’t place machine in direct sunlight, or high temperature places such as near a stove or a heating appliance.
- Don’t use when the power cord is damaged or power plug pin is loose.
- Don’t damage or bent by force or reverse the power cord. Don’t place heavy objects on machine, don’t clamp the power line.
- People who seldom do exercise shouldn’t suddenly do intense exercise.
- After eating or when feel tired, do not use machine.
- This product is suitable only for domestic use and not for commercial use. Warranty will void in case of commercial use.
- when not in use, pull out the power plug from the socket.
Ground protection system!
- This product must be grounded. If the machine is faulty, grounding will provide a good channel for electric current, in order to reduce the electric shock risk.
- This product is equipped with power plug with grounding conductor and plug. Completely insert the plug to standard socket.
- If the equipment grounding conductor’s connection is improper, it will cause electric shock.If you have doubts about whether your product is grounded correct or not, please entrust professional to check.
- Please use the socket which has the same shape with the grounding plug. Don’t use plug adapter.
Installation Instructions
-
When installing, simply fix all screws first, then tighten screws when the installation of frame is done. Put the machine on the flat ground.
-
Hold left& right columns, use 6# inner hexagon wrench and screw M8*25 to lock the console on the columns.
Above are single function installation steps, multifunctional machines need to be installed after you complete the steps above and then continue with the following installation:
3. Put two foams and four massager’s decorative covers on the frame pipe.(as the picture bellow)
-
Use screw M8*40, washerφ8 and nut M8 to lock the massage frame on the columns.
-
Use screw M8*45, washerφ8 and nut M8 to lock the massage frame on the massage pipe.
-
Remove the preinstalled screw M815 from the massager, and then use screw M8 15 o fix the massager on the massager frame.
-
Put the two foams on the massager pipe and put the two dumbbells on the frame.
-
Put the safety key on the picture showing place to start the treadmill.
NOTE: please confirm that all screws are locked uniformly according to
the requirements after installation, and check that no part is left out before
plugging electricity.
According to users’ own physical condition, three levels of incline are here
for choose as below:
Level 1
Level 2
Level 3
Using Instructions
Using treadmill
-
Insert the power plug properly and turn on the switch(in red color)
When the light is on, there will be a beep sound, and then the screen will light up.
-
Please keep the safety key away from children when the treadmill is not in use. Please put the silicon oil bottle in places children cannot reach. If it is eaten or split into eyes by mistake, please use water to wash and consult doctor immediately.
-
Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip the safety key on clothes when using the treadmill to prevent accidents. -
Folding Instructions
Fold the treadmill:
It will save space when the treadmill is folded.
Please turn off the switch and pull out the power plug before folding. Lift the running deck until it is held.
Unfold the treadmill:
Kick the pressure rod, hold the running deck and then let the running deck to fall gradually.
-
Console instructions
Start-up
Normally start after 5 seconds of countdown.
Amount of programs
3 manual programs, 12 automatic programs, 1 FAT program.
Safety lock function
Disconnect the security lock, “E7” shows on the screen. The treadmill stops immediately, and you will hear a beep sound. Put the safety key back, all the data will be cleared in 2 seconds.
Key function
Start button, Stop button:
When the power is on, press the start button to start the treadmill. And press the stop button to stop the treadmill when the unit is in running mode.
Program key
In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic programs. Manual mode is the system defaulting running mode.
Mode key
In standby mode, press this key to cycle the options of 3 different countdown running mode: time countdown running mode, distance countdown running mode and calorie countdown running mode.
Use speed + – to adjust the set value.
Speed + – key:
Use these keys to adjust the speed of the treadmill or to adjust the set value.
Speed shortcut key:
Use these keys to change the speed in running mode.
Media control keys
Play/Pause, Previous, Next, Volume up, Volume down. Press these keys to adjust the media when insert audio equipment.
Incline + – key:
Can be used to set values of parameters and incline. The incline value increase or decrease by one level in each pressing, and if press for more than 2 seconds, the incline can change continuously.
Display Function
Speed Display
Display the current running speed value.
Time Display
Display the time of manual mode and the countdown time under automatic modes
and programs.
Distance display
Display cumulative distance under manual mode and programs. Display the
distance countdown in automatic mode.
Calorie display
Display cumulative calorie under manual mode and programs. Display the calorie
countdown in automatic mode.
Heart rate display
Heart rate signal will be detected after holding the heart rate sensor on
handrails for a short time.
This data is for reference only, it cannot be considered as medical data.
Automatic program
Each program is divided into 10 segments, and the running time of each segment
of the program is evenly distributed. Following is a form of time distribution
of 12 programs.
Time
Program
| Set time / 10 = running time of each period
---|---
| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10
P1| SPEED| 3| 3| 6| 5| 5| 4| 4| 4| 4| 3
P2| SPEED| 3| 3| 4| 4| 5| 5| 5| 6| 6| 4
P3| SPEED| 2| 4| 6| 8| 7| 8| 6| 2| 3| 2
P4| SPEED| 3| 3| 5| 6| 7| 6| 5| 4| 3| 3
P5| SPEED| 3| 6| 6| 6| 8| 7| 7| 5| 5| 4
P6| SPEED| 2| 6| 5| 4| 8| 7| 5| 3| 3| 2
P7| SPEED| 2| 9| 9| 7| 7| 6| 5| 3| 2| 2
P8| SPEED| 2| 4| 4| 4| 5| 6| 8| 8| 6| 2
P9| SPEED| 2| 4| 5| 5| 6| 5| 6| 3| 3| 2
P10| SPEED| 2| 5| 7| 5| 8| 6| 5| 2| 4| 3
P11| SPEED| 2| 5| 6| 7| 8| 9| 10| 5| 3| 2
P12| SPEED| 2| 3| 5| 6| 8| 6| 9| 6| 5| 3
3 Modes parameter setting
Set the initial time countdown to 30:00 minutes, the setting range is
5:00—–99:00 minutes, step by 1:00. The initial setting of calorie countdown is
50 kcal, the setting range is 20 — 990 kcal, step by 10. The initial setting
of distance countdown is 1.0 kilometers, the setting range is 1.0 — 99.0 km
step by 1.0. Cycle to switch the order of manual, time, distance and calories.
Physical Fitness Test (FAT)
In standby mode, press the “Program” key to enter the human body mass index
(FAT) detection window that displays “FAT”. Press the “Settings” button to
select the parameters to be set (F1 – gender, F2-age the F3-height, F4-body
weight), use “speed+” and “speed -” to set gender and press mode button to set
following parameters. When settings are done, hold the hand pulse to enter the
physical detection. The body mass index (FAT) is a measurement of the relation
between a person’s height and weight, but not refer to the proportion of the
body. FAT is suitable for men and women, along with other health indicators,
it serves as basis for people to adjust weight. Ideal FAT should be between
20-25, less than 19 means skinny, the range between 25 and 29 is overweight,
and if you exceed 30, it is considered to be obesity. The range of parameters
is as follow. (This data is for reference only and cannot be considered as
medical data.)
01 Sex 01male 02 female
02 Age10 ——99
03 Height 100 —–200
04 Weight 20—- 150
05 FAT ≤19 Under weight
FAT = (20—25) Normal weight
FAT = (25—29) Over weight
FAT ≥30 Obesity
Translation of Error Codes
| Fault code | Failure Description | Fault handling |
|---|---|---|
| **** E1 | Communication Abnormal: when the power is on, the connection | |
| between lower controller and the console is abnormal. | Possible Cause: |
the communication between the lower controller and console is blocked, check
each joints between the controller and console, ensure that each core is fully
plugged in. Check the the connection line, replace it if it’s damaged.
E2| **** No signal from motor.| Possible Cause: Check the
motor cable to see whether it is connected well or not, if not, connect the
motor wire again. Check the motor cable to see whether it is damaged or has a
burnt smell, if yes, replace the motor. Check the speed sensor to see whether
it is correctly installed or damaged
**** E5| Over current protection: In working, the lower controller
detects the current to be over 6A for more than 3 seconds.| Possible
Cause: Overloading leads to excessive current, and the system stops out of
self-protection, or some part is stuck, causing the motor to stop. Adjust the
treadmill and restart it. Check if there is liquid or burnt smell while the
motor is running, if yes, replace the motor; check if the controller has a
burned smell, if yes, replace the controller; check the power supply voltage,
if it does not match the specifications, change into correct voltage and test
the machine again.
** E6| Explosion-proof impact protection: the abnormal voltage or
motor cause the faulty of circuit that drive the motor.| Possible Cause:**
Check if the power supply voltage is 50% lower than normal voltage ，use the
correct voltage and test the machine again； check if the controller has a
burnt smell and replace the controller; Check if the motor cable is connected
and connect the motor wire again.
E7| Without putting the safety Key| Put the safety key on the right place.
Routine maintenance
Warning: Before cleaning or maintaining products, please be sure the
power plug of the treadmill is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the
electric treadmill.
Remove dust periodically in order to keep the parts clean. Be sure to clean
running belt with both sides of the exposed portion, which will reduce the
accumulation of impurities. Make sure to wear clean athletic shoes to avoid
carrying the dirty matters into running board and belt. Treadmill belts shall
be cleaned by a damp cloth with soap. And please pay attention to avoid too
wet the electrical components and running belt.
Warning: Make sure power plug disconnect before moving motor cover away,
clean the motor at least once a year.
Running belt specialized lubricant
This electric treadmill’s running board and running belt has been lubricated
in factory. Friction between the running belt and running board has a great
influence to the using life and the performance of the electric treadmill,
therefore regular applying of lubricant is needed. We advise you to check the
board regularly. If the board’s surface is damaged, please contact our
customer 0service center.
We advise using lubricant between running belt and running board with
following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month.
1.If the treadmill belt is too loose, there will be skid phenomenon while
running; if it’s too tight, it may reduce motor performance and harden the
abrasion of roller and the running belt. You can lift two sides of the running
belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the treadmill and make the treadmill functions work
better, it is necessary for you to adjust the running belt into the best
condition.
Running Belt alignment
- Put electric treadmill flat on the ground.
- Make the electric treadmill run at a speed of about 6-8km/hour .
- If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise, then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B)
- If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise, then rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Picture A)
Picture A
Picture B
Applying silicone oil
Step 1: Open up the treadmill belt.
Step 2: Open the silicone oil bottle, squeeze the silicone oil on the
side of running board , as shown in the following picture:
Bluetooth Function
Scan QR code bellow to download CULTSPORT APP
Cultsport tracks your Health data by connecting to your health equipment and
your fitness band and tracking all your health data in once place. The
Cultsport app tracks Exercise (steps), Calories burnt and Sleep besides other
health data. We connect to most fitness bands so our customers do not need to
invest on another product.
Cultsport certified panel of Nutritionists will interact (speak) and build
customized plans for each customer. Our certified panel of Fitness Experts
will build customized plans of each customer based on their equipment and
age/health.
We keep all your data in one place- on the Cultsport app so that it can be
referenced by you, your Coach or medical practitioners.
Scan QR code below to download CULTSPORT PLAY APP
Cultsport Play combines the fun of video games with the intensity of
serious workouts, helping you achieve your fitness goal. Pair a Cultsport Play
-supported Treadmill to our app, and get started today.
Thank you for buying FITKIT
Write to us: support@cultsport.com
❖ Web site: www.cultsport.com
❖ Contact Number: 1800-572-6303/1800-572-6402
❖ Customer Support: Monday to Saturday- From 09:00 AM- 06:00 PM
❖ WhatsApp No: +91-6260741911/+91-6260741910
