Fitkit FT98 Steel Heart Rate Sensor Free Diet Plan and Trainer User Manual

: June 12, 2024
: Fitkit

Table of Contents

Fitkit FT98 Steel Heart Rate Sensor Free Diet Plan and Trainer
Product Usage Instructions
Product Brief
Security Precautions and Warnings
Installation Instructions
Using Instructions
- Display Function
- Automatic program
Routine Maintenance
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fitkit FT98 Steel Heart Rate Sensor Free Diet Plan and Trainer

Product Information

The Fitkit FT98 Series Motorized Treadmill is a high-quality treadmill designed for indoor use. It features a sturdy construction and a range of functions to enhance your workout experience. The treadmill is equipped with a console, base motor cover, knob, side rail, end cover, and a safety key. The running belt provides a spacious surface for comfortable running, and the treadmill has a maximum user weight capacity of 90KG. The treadmill operates on an input power voltage of 220-240V~ 50/60Hz and has a motor power of 2 HP. It offers a speed range of 1.0-12.8 Km/h and has an expandable dimension of 15306351065mm.

Product Usage Instructions

Before using the treadmill, make sure to read the user manual carefully.
Ensure that the treadmill is placed on a flat and stable surface.
Connect the treadmill to a dedicated electric outlet with proper grounding.
Insert the safety key into the area with the yellow sticker on the display.
Wear suitable clothes and sneakers before starting your exercise.
Adjust the speed of the treadmill according to your preference using the knob.
To start running, step onto the running belt and gradually increase the speed.
Do not jump up and down while using the treadmill to avoid injuries.
Avoid placing heavy objects on the treadmill or clamping the power line.
Do not exceed the maximum user weight capacity of 90KG.
Keep children away from the treadmill to prevent accidents.
Do not use the treadmill if the power cord is damaged or the power plug pin is loose.
Avoid using the treadmill in moist spaces or under direct sunlight or high-temperature areas.
After using the treadmill, make sure to fold it properly, ensuring that the gradient is zero.
Store the treadmill in a dry and safe place to avoid damage.

By following these instructions, you can safely and effectively use the Fitkit FT98 Series Motorized Treadmill for your workouts.

Model: FT98 Steel

Note: Always choose a treadmill that can support at least 20 more kilograms of weight than your current weight since the impact weight increases during running.

Product Brief

Product Name: Fitkit FT98 Series Motorized Treadmill

Main parameters and parts list

No.| Parameters Names| Description
1| Input power voltage| 220-240V~ 50/60Hz
2| Motor power| 2 HP
3| Speed| 1.0-12.8 Km/h
4| Running surface| 1200400 mm
5| Max user weight| 90KG
6| Expand dimensions| 15306351065mm
7| Functions (Option)| Running
Packing list
No.| Name| units| Qty|
1| Complete machine| set| 1
2| Accessory Bag| pc| 1
Accessory bag list
NO.| Name| QTY| NO.| Name| QTY
1| Inner hexagon spanner 5mm| 1| 6| User manual| 1
2| Inner hexagon spanner 6mm| 1| 7| MP3 cable| 1
2| Combination wrench| 1| 8| ScrewM825| 2
3| Safety key| 1| 9| Screw M612| 4
4| Silicone oil| 1| 10| Plum knob(M1020)| 1

Security Precautions and Warnings

Tips: Before folding the treadmill, make sure that the gradient is “zero”.

Notice:
Please read the instructions carefully before use.

Indoor using and storing the treadmill, avoid dampness, and cannot be spilled by water.
Please wear suitable clothes and sneakers before exercise. Prohibited to exercise on the treadmill barefoot.
High power plug must be grounded, electric outlet should have a dedicated circuit, do not share with other electrical equipment.
Keep children away from the machine to avoid accidents.
Avoid too long time and overload operation, otherwise will cause motor and controller damaged, and will accelerate the deterioration of bearing, running belt and running board. Should maintain machine on a regular basis.
Keep machine away from dust to avoid strong static.
Please cut the electric power off after using.
Please maintain good ventilation when running.
Please clamp security lock cable on your clothing to make sure the machine stops at emergency condition.
If you feel not very well when using this machine, please stop and consult a doctor.
Silicone oil must be kept away from children after use.
If power cord is damaged, please contact our qualified maintenance personnel for service rather than disassemble it at your own discretion.
Always choose a Treadmill that has user weight capacity at least 20 Kgs more than your current weight since the impact weight increases

Forbidden

Don’t use the machine in the status of the shell break in or break off （the internal structure exposed or under the condition of welding-parts may fall off —– Otherwise an accident or injury may happen.
Don’t jump up and down in the process of movement.
- May be injuries caused by the fall.
Don’t keep machine in or near moist space such as the bathroom.
Don’t place machine in direct sunlight, or high-temperature places such as near a stove or a heating appliance.
- Otherwise may cause the leakage and burst into flames.
Don’t use when the power cord is damaged or power plug pin is loose.
- Otherwise will lead to an electric shock, short circuit or fire.
Don’t damage or bent by force or reverse the power cord. Don’t place heavy objects on machine, don’t clamp the power line.
- Otherwise will cause fire or get an electric shock.
Don’t use machine for more than 1 people at the same time, and don’t get close to the machine when it is in use.
- Or it may be an accident or injury due to falls.
People who can’t express their consciousness or can’t operate the machine by themselves cannot use the treadmill.
- May occur accident or injury.
  Avoid drinking water or pouring water when operation.
- May cause electric shock and fire. Forbidden!
People who seldom do exercise shouldn’t suddenly do intense exercise.
After eating or when feel tired, do not use machine.
- May lead damage to your health.
This product is suitable for family use, does not apply to schools, gymnasium and so on.
Warranty voids in case of commercial use.
Don’t use when hard objects are in pants pockets.
- May cause accident or injury.
Don’t use when the power plug is on the needle, garbage, or water.
- May cause electric shock, short circuit, or fire. Do not use with wet hands!
when not in use, pull out the power plug from the socket.
- The dust and moisture can age the insulation, and result in leakage fire.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

Ground protection system!

This product must be grounded. If the machine is dysfunctional, grounding will provide a good channel for electric current, in order to reduce the electric shock risk.
This product is equipped with power plug with grounding conductor and plug. Completely insert the plug to standard socket.
If the equipment grounding conductor’s connection is improper, it will cause electric shock. If you have doubts about whether your product is grounded correct or not, please entrust professional to check.
Please use the socket which has the same shape with the grounding plug. Don’t use plug adapter.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved, children shall not play with the appliance, cleaning and user maintenance shall not be made by children without supervision.

Installation Instructions

When installing, simple fix all screws first, then tighten the screws when the installation of frame is done.

Put the machine flat on the ground. Remove the knob with the direction shown in the picture below. Then stand the columns and console with the direction shown in the picture below.
Remove the preinstalled screws M822 on the supporting frame and then tighten the supporting frame with screw M612 on the base. Use 5# hexagon wrench and screw M6*12 to lock and fix the base (two screws for each side).
Hold left& right columns, use 6# hexagon wrench and screw M8*25 to lock the console frame on the columns (Tighten all screws in above steps, and please notice not to clamp the cable by column).
Use the knob in step one to lock the main base and columns(Rotate clockwise, please refer to the arrow point direction).Uneven ground may cause trouble when rotate the knob, please lift the column slightly to left side(as shown below).In order to fold the machine easily next time, please don’t rotate the knob too tight.
Put the safety key on the picture showing yellow area, then press the start button to start the treadmill. (Notice: The treadmill can only start when the safety key is put on the yellow area on the console.)

NOTE: please confirm that all screws are locked uniformly according to the requirements after installation, and please check and make sure there is no part being left out before plugging electricity.

According to the personal demands, three levels of manual incline for choose as below:

Folding instructions
When the treadmill is not in use, you can lift the running deck and then use knob to lock the running deck and base, as shown in the picture below.

Unfolding instructions
Please hold the running deck with your right hand before unfolding the treadmill, and use your left hand to remove the plum knob (counter clockwise direction). Then lower the running deck slowly and install the plum lock back.

Using Instructions

Using treadmill
Insert the power plug properly and turn on the switch (in red color) (1). When the light is on, there will be a beep sound, and then the screen will light up.
Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip the safety key on clothes when using the treadmill to prevent accidents. Put the safety key back when continue using the treadmill.
Console instructions Button instructions
Start: When the treadmill is in standby condition, press Start to start the treadmill
Stop: When the treadmill is running, press Stop to stop the treadmill. All the data will be cleared and the treadmill goes to manual mode.
Program: In standby mode, press Program can cycle the options from manual mode to automatic programs. Manual mode is the system defaulting running mode.
Mode: In standby mode, press Mode can cycle the options of 3 different countdown running mode: time countdown running mode, distance countdown running mode and calorie countdown running mode. When choosing any mode, speed adjusting buttons can be used to set the value. Press Start to start the treadmill after setting the value.
Play/Pause: When playing music, press Play/Pause to pause the music, and press the button again to play music again.
Volume+ -: Can be used to adjust the volume. If there is no sound, press Volume + to increase the volume.
Speed + -: Can be used to adjust the speed of the treadmill.
Speed direct selection: When the treadmill starts, press 3, 6, 9 buttons to change the speed directly.

Display Function

Speed display: Display the current running speed value.
Time display: Display the time of manual mode and the countdown time under automatic modes and programs.
Distance display : Display cumulative distance under manual mode and programs. Display the distance countdown in automatic mode.
Calorie display: Display cumulative calorie under manual mode and programs. Display the calorie countdown in automatic mode.
Heart rate display: Heart rate signal will be detected, and the screen shows the heart rate number. Heart rate measure function(optional): In the case that the treadmill is energized, hold the heartbeat sensor piece for a while and the heart rate will be shown on the screen. (This data is for reference only, it cannot be considered as medical data. )

Automatic program

Translation of Error Codes

Error code| ****

Description

| ****

Solution

---|---|---
E1| Communication Abnormal: when the power is on, the connection between lower controller and the console is abnormal.| Possible Cause:

The communication between the lower controller and console is blocked, check each joint between the controller and console, ensure that each core is fully plugged in. Check the connection line, replace it if it’s damaged.

E2| ****

No signal from motor.

| Possible Cause:

Check the motor cable to see whether it is connected well or not, if not, connect the motor wire again.

Check the motor cable to see whether it is damaged or has a burnt smell, if yes, replace the motor.

Check the speed sensor to see whether it is correctly installed or damaged

E5

| Over current protection:

In working, the lower controller detects the current to be over 6A for more than 3 seconds.

| Possible Cause:

Overloading leads to excessive current, and the system stop out of selfprotection, or some part is stuck, causing the motor to stop. Adjust the treadmill and restart it. Check if there is liquid or burnt smell while the motor is running, if yes, replace the motor; check if the controller has a burned smell, if yes, replace the controller;

check the power supply voltage, if it does not match the specifications, change into correct voltage and test the machine again.

E6| Explosion-proof impact protection: the abnormal voltage or motor cause the faulty

of circuit that drive the motor.

| Possible Cause:

Check if the power supply voltage is 50% lower than normal voltage ， use the correct voltage and test the machine again ； check if the controller has a burnt smell and replace the controller; Check if the motor cable is connected and connect the motor wire again.

E7| No safety key| Put the safety key on the right place.

Routine Maintenance

Warning: Before cleaning or maintaining products, please be sure the power plug of the treadmill is pulled out.

Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill.
Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both sides of the exposed portion, which will reduce the accumulation of impurities. Make sure to wear clean athletic shoes to avoid carrying the dirty matters into running board and belt. Treadmill belts shall be cleaned by a damp cloth with soap. And please pay attention to avoid too wet the electrical components and running belt.

Warning: Make sure power plug disconnect before moving motor cover away, clean the motor at least once a year.

Running Belt Alignment
Put the treadmill flat on the ground. Make the treadmill run at a speed of 6-8km/hour.

If the running belt is closer to the left: rotate the left adjusting bolt with 1/2 turn clockwise, then rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Picture A)
If the running belt is closer to the right: rotate the right adjusting bolt with 1/2 turn clockwise, then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B)

Running Belt Tension Adjusting
When you use the treadmill for a long time, the running belt or the multi- wedge belt becomes loose because of the abrasion. To facilitate the safe use, appropriate adjustment is needed.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the treadmill belt or multi-wedge belt is a little loose and further affirmation need to be made.

Step 1: Remove the motor cover, make the treadmill run at a speed of 1 km/h, and then stand on the running belt, hold the handlebar, and tread the treadmill belt slightly.

A. The instantaneous step cannot stop the belt, the tightness is appropriate.
B. If your instantaneous step stops the running belt, but the multi-wedge belt and front roller is still running, it indicates that the running belt is loose and appropriate adjustments must be made to facilitate the safe use.
C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments must be made to facilitate the safe use.

Step 2: Use a wrench to adjust the screws on the motor base according to the condition. Meanwhile, gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree to flip the belt is very limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could be flipped by 80%.

Step 3: Finally lock the motor base, install the motor cover.

Applying silicone oil

Step 1: Lift the running belt slightly.

Step 2: Open the silicone oil bottle, squeeze the silicone oil on the sides of running board, as shown in the following picture:

Bluetooth Function

Scan QR code below to download ONEFITPLUS APP

Scan QR code bellow to download ONEFITPLUS APP OneFitPlus tracks your Health data by connecting to your health equipment and your fitness band and tracking all your health data in once place.
The OneFitPlus app tracks Exercise (steps), Calories burnt and Sleep besides other health data. We connect to most fitness bands so our customers do not need to invest on another product. OneFitplus certified panel of Nutritionists will interact (speak) and build customized plans for each customer.

Our certified panel of Fitness Experts will build customized plans of each customer based on their equipment and age/health. We keep all your data in one place- on the OneFitplus app so that it can be referenced by you, your Coach or medical practitioners.

Thank you for buying FITKIT: