FITKIT 10K 3.5HP Certified Motorised Treadmill User Manual

FIT KIT 10K 3.5HP Certified Motorised Treadmill

Product Information

Model Name: Fitkit 10K 3.5HP

Main Technical Features:

• Main use: Body and beauty building

• For home use

• The panel displays speed, time, distance, heart rate, calories, etc.

• Display Mode: LCD

• Input voltage: 220V

• Frequency: 50/60Hz

• Input current: 8A

• Temperature for working: 0-40°C

• Speed range: 1-14km/h

• Incline: 3 manual

• Program: Time display range: 0:00-99:59 (minute:second);
  Distance display range: 0.1-99.99kms

• Machine size (LWH): 15457101270mm

• N/W-G/W: 47KG/54KG

• Made in China

Product Usage Instructions

1. Before installation and operation, carefully read the operation manual.
2. Save the manual for future reference.
3. Always choose a treadmill that can support at least 20 more kilograms of weight than your current weight.
4. Insert the power plug into a socket directly. Ensure the current load is less than 10A.
5. The constant running time should be less than 2 hours, and the maximum weight should be 120kgs.
6. Place the treadmill on a clean floor, not on a thick carpet, to ensure proper ventilation. Avoid placing the treadmill in moist places or outdoors. If there is an issue with the electrical wire, contact the local distributor for replacement.
7. Position the treadmill conveniently near an electric socket.
8. If you are a beginner, grip the handrails while jogging or running until you are familiar with the machine. Do not stand on the running belt when the machine is powered on. Stand on the footplates beside the treadmill, press the start button, and it will run at the lowest speed. You can then run on the belt.
9. Dress properly while using the treadmill. Avoid loose clothing that may get entangled in the machine. Wear sport shoes with a soft sole.
10. Before removing the protecting cover of the treadmill, ensure the machine is powered off.
11. Keep children and non-sporters away from the running treadmill to prevent unnecessary injuries.
12. Ensure one end of the safe key is placed in the designated position and the other end is clipped to your clothes while running on the machine. This way, you can pull the safe key for the machine’s sudden stop in case of a dangerous condition, preventing injuries.
13. If you engage in other activities like watching TV or reading while running, exercise caution. These activities may distract your attention and lead to loss of balance and potential injuries.

Special tips:

1. Before installation and operation, please read this operation manual carefully.
2. Please save this manual for future reference.
3. Always choose a treadmill that can support at least 20 more kilograms of weight than your current weight.

Brief Description

10K 3.5HP motorized treadmill (diagram 1) can help complete your goal of keeping fit together with unique and elegant appearance. Easily read panel parameter 。Easily operated folding system realizes space-saving. Auto speed range 1-14km/h with 3 manual inclines. All makes it a hot home use fitness equipment.

Main Technical Features

• Main use: Body and beauty building
• This treadmill is for home use
• The panel displays speed, time, distance, heart rate, calories,s, etc. Display Mode LCD
• Input voltage: 220V
• Frequency: 50/60Hz
• Input current: ≤8A
• Temperature for working: 0∽40℃
• Speed range: 1∽14km/h
• Incline: 3 manual
• Program: Time display range: 0:00∽99:59(minute: second); Distance display range:0.1~99.99kms
• Machine size (LWH): ：15457101270（mm）
• N/W-G/W ： 47KG/54KG；
• Made in China

Tips for Safety

• Insert the power plug into the socket directly. Current load should be less than 10A.

• The constant running time is less than 2 hours, max weight is 120kgs.

• Place your treadmill on the clean floor not on the thick carpet, otherwise it will not convenient
  for ventilation. Also please don’t put the treadmill in the moist place or outdoors; If there is something wrong with the electrical wire, please replace it with the electrical wire provided by our company. For the replacement, please contact with the local distributor.

• The treadmill should be placed in the convenient position for electric socket.

• The freshman should grip the handrails when jogging and running until familiarly. Please don’t
  stand on the running belt, after the machine is power on (the safe key is at the appointed position). Please stand on the footplates besides the treadmill, press the “start” button, it runs at the lowest speed, at this time you can run on the belt.

• While running, you should dress properly. Don’t dress too loosely in case your clothes are entangled by the machine. And please wear sport shoes with soft sole.

• Before taking down the protecting cover of the treadmill, please keep the machine is power off.

• Don’t let children and non-sporters get close to the running treadmill to avoid unnecessary injury.

• Please make sure one end of the safe key has been placed in the appointed position and the
  other one has been nipped to your clothes when you are running on the machine. In this way, you can pull the safe key for the machine’s sudden stop under the dangerous condition. Then you will not be injured.

• If you are enjoying other entertainment while running such as watching TV, reading. Please
  be particularly careful. These activities will distract your attention, which may make you lose your balance and get hurt.

• Please pull the plug off from socket and keep the safe key, when the treadmill is unused.

• Please don’t put anything under treadmill and don’t let your children play near it after folding.

• Please consult your doctor at first before running, if you have one of the following diseases.

• a) Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking, and other chronic diseases, complication disease.

• b) If you are over 35 years old and heavier than common weight.

• c) Women in pregnant or in breasting period.

• Please stop exercising immediately and consult your doctor if you feel giddy, surfeit, thorax ache, or other symptoms.

• Please drink adequate water after taking exercise.

Installation: See “Installation sketch”

Use and Operation

• Panel Keys and Function

1. MP 3 ”

   • Press this key to open or shut the speaker amplifier.

2. PROG” (could be pressed continuously to your expected mode)

   • Press the “PROG” key once again to enter “24 direct selected programs” There are 24 programs.

3. Speed shortcut key:

   • Under running conditions, press this key, speed can be set to the value directly.

4. Speed shortcut key”

   • Under running conditions, press this key, speed can be set to the value directly.

5. Set up:

   • Under the “mode “condition, we only could press the “set up “key to up the speed

6. Speed down”

   • Under running conditions, press this key, speed can be speeded down to the one you need.

7. Start: Under ready condition, press this key, it runs at the speed of 1.0km/h.

8. Stop: Under running conditions, press this key, if it runs at a speed of more than 3.5km/h, it will slow down and then stop. During this stopping process, other keys are not available. If it runs at a speed of less than 3km/h, then it stops immediately.

9. Mode”

   • Under ready conditions, press this key to set time, distance, and calories accordingly. Press “set-up” or “set-
     down” keys to set the value of time, distance, and calories. Then press the “start” key, and the machine will run at 1.0km/h. And the set figures will be counted down, when it comes to “0”, the machine stops.

10. Set down:

    • Under the “mode” condition, we only could press the” set down” to down the speed

11. Speed up:

    • Under running conditions, press this key, speed can be speeded up to the one you need.

12. safety key

    • Under urgent condition, pull this key, machine stops immediately.

Unload operating

1. Insert power plug into the socket with earth wire, turn the switch to “1” position which is on the frame
2. Put the safe key in the right position, then circuit is on, press “on/off”, keep it run in unload condition. Test the condition of running belt (testing from low speed to high ones), after testing, press “on/off”.
3. If everything is ok, then start to run.

Meter operating instruction

1. Insert power plug into the socket with earth wire, turn the switch to “1” position which is on the frame. Place the safe key to the appointed position. After a few seconds, panel will show that the machine is ready.
2. Nip another end of safe key to your clothes, and stand on the footplate on both sides.
3. Press “on/off” key, running belt moves at the lowest speed (1.0km/h). Speed windows will display your running speed.
4. Start to run.
5. Press speed key or incline key to adjust speed and incline, speed window and incline window will display your speed and incline.
6. To end your exercise in a safe way, please first press “on/off” key to close the treadmill. Please leave the running belt until it stops slowly. Turn off the power.

Heart Rate Testing
Our treadmill can test your heart rate via the heart rate sensor. The data is only for reference.

Folding and Opening Treadmill

Folding

Firstly, lift and fold the back part of the frame board by hand till you hear a light sound, which means the folding system has been locked. At this time running board can’t be turned to the opposite direction

Opening

Put the folded treadmill in a capacious position when you want to run. Then pull the adjusting parts by hand to keep it is unlocked. Press the back part by your hands down to about 10%, release it, then it will open automatically.

Maintenance

• Identification ways for the degree of tightness of running belt and poly V-belt.
• When the running belt skips, please follow the steps as follows to make sure which belt needs to be adjusted, running belt or poly V-belt.
• a) Cut off power, screw off the bolt on cover of protection. Then take down the protecting cover from the treadmill
• b) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the running belt stop. If running belt stops, together with the front roll, but the motor still runs, under this condition, it means the poly V-belt needs to be adjusted.
• c) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the running belt stop. If running belt stops, but front roll still runs, under this condition, it means the running belt needs to be adjusted.

The adjustment steps for poly V-belt

• Cut off power firstly and take down the cover of protection.
• a) Loosen the four screws for the motor, adjust them in a circuit clockwise, then screw down the loose screws.
• b) Keep the power on, and adjust the poly V-belt is loose or not following the point 3.1 above, if yes, please repeat the action same to point a) above.

Adjustment steps for running belt

• a) Turn the speed to be 5.6km/h. for running
• b) Turn the bolts at both right and left sides to be half a circuit or a circuit by the 8mm spanner.(diagram1 and diagram 2)
• c) After adjustment, running belt still skips, please repeat the steps above.

The adjustment steps for running belt deflection

• The running belt will be deflected more or less under using. Then it needs to be adjusted.

The steps are as follows:

• a) Place the treadmill on a horizontal floor, turn the speed to be 5.6km/h for running.
• b) If the running belt is deflected to the right, adjust the bolt on the right by turning it for half a circle clockwise, then adjust the bolt on the left by turning it for half a circle. (See diagram 3)
• c) If the running belt is deflected to the left, adjust the bolt on the left by turning it for half a circle clockwise, then adjust the bolt on the right by turning it for half a circle. (See diagram 4
• d) After the adjustment, the running belt still keeps deflecting, please repeat the steps above. running belt deflected to right running belt deflected to the left
• The adjustment for right deflection (diagram 3) The adjustment for left deflection (diagram 4)

Running board lubrication

• The treadmill is equipped with lubricated running board, which needs constant maintenance.
• The friction between running board and running belt has a great effect on the treadmills’ e life. So please lubricate your machine termly. The steps are as follows:
• a) Cut off the power
• b) Wipe out the dust between running board and running belt with a clean cloth.
• c) Daubing the Silicon oil on the running board and running belt equably.
• d) While adding lubrication oil, please keep your clothes away from the machine for avoiding the injury.

Cleaning

• a) Please power off and pull the plug cap out before cleaning.
• b) Wipe out the dust stuck on the surface and running board frequently.
• c) Please clean the surface of frame and running belt with a soft cloth dipped with suds, don’t use things like eradicator and naphtha. (After cleaning, please dry it for use)
• d) Please take the protecting cover off every two months, use vacuum dust-collector to suck the dust remaining inside of the protecting cover. (The dust will make the components of circuitry board short circuit)

Cautions, folding, depositing

Cautions

• Please make sure that the plug cap has been pulled out before cleaning or maintenance. 6.7.2 Depositing
• The treadmill should be deposited indoor in case of being damp. Water can’t be spattered and nothing can be laid and inserted on the treadmill.
• Please keep the air a little humid in winter. And please void the big static electricity, it may disturb the operation of meters or even damage them.

Guides for malfunction

Analyzing and eliminating malfunction

Item

.

| Malfunction| Reasons| Solution
---|---|---|---
1| Treadmill can’t be started| The safe key isn’t in the

right position

| Put the safe key in the right

position

The electrical switch is

placed to “0”

| Turn the electrical switch to “1”
creepage switch is not right| Replace creepage switch
2| Meter can’t display| The meter control line and control panel are

unconnected

| Pull the bolt out and open the

motor cover and reconnect it

Turn on the meter and reconnect
3| Heart rate can’t be displayed| The  pole  of   heart  rate

sensor is not wet enough

| Wet the pole with water or liquor

for hard contact lenses

Disturbed                      by

electromagnetism

| Stay                away               from

electromagnetism

4| Incline doesn’t work| The motor wire is not| Open    the    motor    cover and
| | well connected| reconnect it
---|---|---|---
5| Running belt runs faster or slower than what has been

displayed

| Unadjusted| Readjust it
6| Running belt slips| Running belt is not tight enough| Please read point 3.3 Adjustment steps for tightening running belt

for reference

7| Running belt is deflected| The     running     belt     is unadjusted.| Please read point 3.4 The steps for     adjusting     the     deflected

running belt for reference

• If you still can’t solve the problems after taking the solutions above, we hope that you can contact our dealer or company as soon as possible.

Error

• Error Treadmill gives the following error code if anything wrong please contact the professional service people soon if it happens.

shifting.
E01| Please check if the main line was in good connection
E02| Change the MCB if still with the problems after restarted the treadmill
E03| Please check if the speed sensor on the motor was in the right position, without any shifting.
E04| Self-inspection if both incline motor and connect line were well, if still not OK, please change the MCB.
E05| Change the MCB if still with the problems after restarted the treadmill
E06| Change the MCB if still with the problems after restarted the treadmill

1. Motorized Treadmill Installing Sketch Map
2. Motorized Treadmill Installing Sketch Map

Bluetooth App

Scan QR code below to download cultsport APP that tracks your Health data by connecting to your health equipment and your fitness band and tracking all your health data in once place. cultsport app tracks Exercise
(steps), Calories burnt and Sleep besides other health data. We connect to most fitness bands so our customers do not need to invest on another product. cultsport-certified panel of Nutritionists will interact (speak) and build customized plans for each customer. Our certified panel of Fitness Experts will build customized plans of each customer based on their equipment and age/health. We keep all your data in one place- on the cultsport app so that it can be referenced by you, your Coach or medical practitioners.
Scan QR code below to download the cult sport APP

Scan the QR code below to download cult sport play APP

Cultsport play combines the fun of video games with the intensity of serious workouts, helping you achieve your fitness goal. Pair a Cultsport play- supported Treadmill to our app, and get started today.

Customer Care Support

• Write to us: [email protected]
• Web site: www.cult.fit
• Contact Number: 1800-572-6303/1800-572-6402
• Customer Support: Monday to Saturday from 09:00 AM- 06:00 PM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>