NGOKPYD HP340 LED Head Torch User Manual
- June 14, 2024
- NGOKPYD
Table of Contents
NGOKPYD HP340 LED Head Torch
Product Information
Specifications
- LED Source: P82pcs + red beads2pcs
- Material: Aluminum alloy + ABS
- Charging Port: Type-C (USB-C)
- Charging Indication: Red light during charging; Green light when finishing charged
- Battery Level Indication: Red flash( specific number of flashes not mentioned ) indicates low battery
Product Usage Instructions
Charging the HP340
- Locate the Type-C charging port on the HP340.
- Connect the provided Type-C cable to the charging port.
- Plug the other end of the cable into a power source, such as a USB charger or a computer’s USB port.
- The HP340 will start charging, indicated by a red light.
- Once the HP340 is fully charged, the red light will turn green.
- Unplug the charging cable from the HP340 and the power source.
Using the HP340
- Press the power button on the HP340 to turn on the light.
- To adjust the brightness, press and hold the power button. The light will gradually brighten or dim. Release the button when it reaches the desired brightness level.
- To turn off the light, press and hold the power button until it shuts off.
Battery Level Indication
The HP340 has a battery level indicator to help you monitor the remaining battery power. When the battery is running low, the light will flash red. Please recharge the HP340 as soon as possible to ensure uninterrupted usage.
Frequently Asked Questions (FAQ)
-
Q: How long does it take to fully charge the HP340?
A: The charging time may vary depending on the power source. It is recommended to use a 5V/2A charger for optimal charging speed. On average, it takes approximately 2-3 hours to fully charge the HP340. -
Q: Can I use the HP340 while it is charging?
A: Yes, you can use the HP340 while it is charging. However, please note that the charging time may be longer if the light is in use during charging. -
Q: Is the Type-C cable included in the package?
A: Yes, a Type-C charging cable is included in the package. It is recommended to use this cable for optimal charging performance.
NGOKPYD HP340 Product Parameters
| LED Source | P82pcs + red beads2pcs |
|---|---|
| Material | Aluminum alloy + ABS |
| Charging Port | Type-C (USB-C) |
Charging Indication
| Red light during charging;
Green light when finishing charged
Battery Level Indication
| Red flash(<10%-need charge); Red(10%-30%)
Green light(30%-100%)
Work Modes
| 6 Light Modes:【white high】-【white mid】-【white low】-
【white strobe(double click)】-【red】-【red flash】
Memery Function| Holding 10sec at any mode activate memory function
Lamp Adjustable| lamp head up & down 180° adjust lighting angle
Charging Voltage| 5V
Power Battery Type| 1x 2000mAh 1-8-6-5-0 Li-ion battery
Charging Time| 2.5 hours
Runtime| 3.5-6 hours(depends on mode choice)
Waterproof| IP65
Product Weight| 79g
Product Size| 882535mm
Application
| Camping, hiking, exploring, climbing, hunting, fishing,
constructional engineering,repairing, household, etc.
Warnings
| 1. Do not look directly into the light to avoid eye damage.
2. Do not disassemble the product by yourself.
3. Do not charge the headlamp with a voltage exceeding 5V;
Do not charge the headlamp with an unqualified charger
otherwise.
Or the life of the headlamp and battery will be
shortened and may lead to safety accidents.
4. The charging time for this product is 2.5-3 hours. Once fully charged, the charger must be disconnected in time to
avoid accidents.
5. When charging the headlamp, Keep away from children, flammable and explosive substances, high temperatures or
humid environments, etc.
6. Please read the above precautions carefully before using
the headlamp.