SANWA GMAWTB168 2.4G Wireless Trackball Mouse Instruction Manual
- June 14, 2024
- SANWA
Table of Contents
- GMAWTB168 2.4G Wireless Trackball Mouse
- Opening
- Caution
- Warnings Regarding Health
- Specifications
- Compatible Models
- Name of Parts
- Charging Method
- Connection with Mouse
- Switch Devices
- Set Deceleration Mode
- Customize Buttons (for Windows Only)
- Troubleshooting
- Warranty Term
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wireless Trackball Mouse
Manual
Wireless
400-MAWTB168 GMAWTB168
2.4G Wireless Mouse
2.4G Wireless Mouse Receiver
FCC ID: 2AMSUWTB168
FCC ID: 2AMSURC9
FCC ID: 2AMSURC9C
GMAWTB168 2.4G Wireless Trackball Mouse
|
---|---
https://www.facebook.com/sanwago/services/|
https://youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg
Opening
Thank you for purchasing this Trackball Mouse.
Caution
- The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
- This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
- Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
- Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required.
- Do not use this product on airplanes as it may interfere with the airplane communication system.
- Please consult your doctor before using this product if you use a pacemaker or other medical device.
Warnings Regarding Health
Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.
Specifications
Interface | USB 3.2/3.1/3.0/2.0/1.1 |
---|---|
Connector Shape | USB A , USB Type-C |
Wireless System | 2 4GHz RF Radio wave system |
*The ID between the mouse and the receiver is fixed.
Communication Range| Wooden desk (nonmagnetic material) / approx. radius 10m,
Steel desk (magnetic material) / approx. radius 2m
Resolution| 6004800.12001600 DPI
Reading Method| Optical sensor system
Buttons| 2 buttons, 2 side buttons, wheel button (scroll), count switch button
Size/Weight| Mouse: W104.9 x D128.1 x H47.2mm; approx.126g
USB A Receiver: W14.6 x D19.1 x H6.1 mm; approx.2g
Type-C Receiver: W14.9 x D23.5 x HSmm; approx.2g
Compatible Models
Windows (DOS/V) PC, Apple Mac series, Chrome OS PC Models with a USB A port
or USB Type-C port .
Windows 10°8.1°8,macOS 12,11, 10.13~10.15 iPadOS 13~15, ChromeOS
Name of Parts
1. Left button / Right button
2. Wheel button (scroll button)
3. Back button
4. Forward button
5. LED
6. Count switch button
7. Trackball
8. Charging port (Type-C)
9. Power switch| 10. Notice LED
11. Connection switch button
12. Receiver storage slot (Type-C)
13. Receiver storage slot (USB A)
14. Trackball removal hole
15. Charging cable
16.Receiver(USB A)
17. Receiver(USB Type-C)
---|---
Charging Method
- Connect the mouse with the included charging cable and start charging, the LED lights blue.
*LED blinks red when low battery. - When the notice LED light goes off, charging is complete. Please disconnect the charging cable.
Be sure to use the included charging cable for charging.
Charging time is about 1.5 hours.
Connection with Mouse
*Warning: It is recommended that other apps are closed before connecting the trackball mouse.
- Press the connection switch button and the LED of the corresponding device at the bottom flashes.
- Turn on the PC and wait until OS starts up complete.
- Connect this product to the USB (A or Type-C) port of the computer.
- Hardware detection will start automatically and a wizard will launch to update the device driver. (installation is automatically completed for Mac products)
Switch Devices
- This product can be connected to one USB-A device and one Type-C device.
- Please follow the instructions in “9. Connection with Mouse” to complete the pairing of the relevant device.
- Press the connection switch button to switch to the corresponding device.
Set Deceleration Mode
Set to deceleration mode to slow down the cursor speed.
How to set: Press and hold the count switch button and the right button
simultaneously for at least 3 seconds. The LED will blink and enter the
deceleration mode.
How to cancel: Press and hold the count switch button and the left button
simultaneously for at least 3 seconds. The LED will blink and the deceleration
mode will be canceled.
Customize Buttons (for Windows Only)
To use the button custom function, you need to install a driver from our website.
-
Only Windows is available. [Driver installation method]
- Access“https://www.sanwa.com/download/tbx.exe”
- Click to download and save the file.
- Confirm the agreement on the software specification license, click “Yes” and start the download.
- Follow the instructions and click “Next” and “Install”.
-
If you have any problems during installation or use, please contact us. 5. The driver is installed. Click “Finish”.
Troubleshooting
Q. The trackball (cursor) doesn’t move.
A. Please check if this product is correctly connected to the USB port.(See
“9.
How to Connect the Trackball”)
Q. The cursor or scroll movement is not smooth.
A. Remove the ball and clean it.
Warranty Term
1 year I nquiries
support-en@sanwa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>