LincPlus T3 Android 13 Tablets User Manual

June 14, 2024
LincPlus

LincPlus T3 Android 13 Tablets User Manual

Product Descriptions

  1. Power button
  2. Volume up/ down
  3. Microphone
  4. Front camera
  5. Speakers
  6. USB port
  7. Charging indicator
  8. Micro SD
  9. Flash Light
  10. Rear camera

Specification

Brand LinoPlus
Model T3
CPU MediaTek MT8 7 8 1 Oda-Core
OS Android 13
Memory 8G LpDDR4
Storage 1 2 8G eMMC/ uFS+ DDR
Display 10.36 inch. 2000×1200. IPS
Touch Intel!. 1 0 piont
Case Full               Metal
Battery 7000mAH/3.8V
Camera Front 8M. Rear 13M. Flashlight
Wi- Fi 2.4G/5G 802.11 a/b/g/n/ac
Bluetooth Bluetooth 5.2
I/O USB port
SD port Micro SD
Button Power. VOL-. VOL+
Sensor G- sensor/ L-Sensor/ P-Sensor
GNSS GPS/ BeiDou/ Glonass/ Galileo
Microphones lx MIC
Speaker 4x 1W Box Speaker
Charger 20W. Support PD/ PE+ quick charger
Dimension 249x159x7.9mm,8.8mm narrow bezel
Weight Tablet 480g
Contains Tablet. Charging cable. Charging head, Ejection pin. Manual

Dear customer;
LincPlus would like to thank you for your recent purchase. We truly care about your user experience.
If you have any questions or concerns, please feel free to contact us. Our customer support team is standing by to assist you.
Best regards
LincPlus Service Team

E2EURO Consulting HUNGARY (for Prodsg authorities only) Hoferstrasse 9b, 71636 Ludwigsburg Germany

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howeverthere is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:
This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of allpersons regardless of age or health.

FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Portable Equipment (FCC ID: 2AHYJ-TVE1070M) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the the body& worn is 0.422W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that does not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

ShenZhen LincPlus Technology Co., Inc Add: 5F, No.2 Building, District D2,TCL International E City, NO.1001 Zhongshanyuan Road, Nanshan District, ShenZhen, P.R.China
E-mail: [email protected] https://www.lincplustech.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LincPlus User Manuals

Related Manuals