LincPlus P1 Laptop User Manual

LincPlus P1 Laptop

UncPlus Product Information and Usage Instructions

Product Information

The UncPlus is a software application designed for use with the LINCPLUS P device. It is used to manage and transfer data between the device and a computer, as well as to perform various diagnostic functions on the device. The UncPlus software is compatible with Windows and Mac operating systems.

Usage Instructions

To use the UncPlus software with your LINCPLUS P device, follow these steps:

1. Connect your LINCPLUS P device to your computer using a USB cable.
2. Install the UncPlus software on your computer by following the on-screen instructions.
3. Launch the UncPlus software.
4. Select the LINCPLUS P device from the list of available devices.
5. Use the software to manage and transfer data between the device and your computer, or to perform diagnostic functions on the device.

For more detailed information on using the UncPlus software, please refer to the user manual provided with the software.

Product Features

• OS Windows RS4
• 13.3″ IPS screen
• Dual-core
• DDR4 4GB, eMMC 32GB
• Bluetooth 4.2
• Camera front 0.3 MP
• Wi-Fi 2.4G +5 G
• Support USB host
• Micro SD
• speakers
• SSD expanding support

Cautions

• Be careful of use, the display can be damaged if it undergoes external shocks or pressure. In case of external damage or transformation, the customer needs to pay to repair charge even though in warranty period.
• Do not give excessive shock to equipment or drop it.
• Be careful of long-time use with high volume. It can occur hearing damage.
• Do not discretionally disassemble equipment as you can’t receive free warranty service.
• Equipment can be damaged excessively or lose date if the equipment cable is disconnected or powered off during firmware updates and file uploading or downloading.
• Do not use it in a cold, wet, and dusty place. It may occur external transformation or screen condensation, and malfunction.
• We don’t take responsibility for data loss stored in equipment. Please use the equipment after backing important files up.
• Please avoid using it in dusty environments as dust may go into the inside of equipment or screen.

Name of Parts

and  switch  the  display  to  a  wider screen (Not Included)
4. Power light / Charging Indicator| Indicates the battery-charge status
5. Caps Lock Indicator| Indicates when all letters are capitalized
6. Close TouchpadIndicator| Closing the touch board function
7. USB port| Connect USB devices
8. Audio port| Connect  a  headset,  headphones,  microphone,  or  other audio  equipment,  to  listen  to stereo sound, record audio, or make web phone calls
9. SD card slot| Reads and writes files stored on a MicroSD Card
10. Presicion Touchpad| Functions like a computer mouse

Turn on PC

1. Press the Power button on the keyboard to turn on the PC

Turn off PC

1. Click the Windows icon,
2. Power icon,
3. “Shut down” on the bottom left corner of the screen.

Understanding the Screen

Charm menu

1. Click the Charm menu icon on the bottom right corner of the screen.
   or push button “Windows Key + A” on the keyboard.

2. “Tablet mode”, “Rotation lock”, “Setting”, Wi-Fi” and other functions come up.

Micro SD card slot

Micro SD is the removable drive that can move various data easily and expand the capacity of PC

Using Card

1. Insert the Micro SD card into Micro SD card slot
2. Message in top of right side
3. Click and touch ‘Open folder to view files’
4. Now you can save, move and delete data on a Micro SD card.
5. After finish use, press inserted Micro SD card, and the Micro SD card sticks out.

Setting Volume

The volume setting is available by button and the volume icon on the bottom right corner of the screen.

Setting Volume by volume icon
Click the volume icon on the bottom right corner of the screen.

Setting LCD brightness

The brightest setting when using adopter, and the dark setting when use a battery to increase battery using time more longer

1. Open the Charm menu.
2. Set the screen brightness by clicking the Brightness icon.

Wireless Network (Wi-Fi)

Can simply connect to the wireless network if there is Wi-Fi nearby.

Connecting wireless LAN

1. Click the Wi-Fi icon on the bottom right corner of the screen. All available Wi-Fi lists will be shown up.
2. Click the desired Wi-Fi on the list.
3. Click the connect icon.

The network security key needs to be checked by the network manager

Battery

If use a PC with a battery, not the adopter, please refer to this description

How to charge the battery

Please plug the charger in the PC charging port

How do check battery remains

1. After separating the charger port from the PC, move the battery icon screen.
2. The battery remains will show up on the battery icon.

Battery use period information

As a consumable, the battery use period is decreased if is used a long time If an hour of battery use is decreased to half of the time of purchase, please change to the new one If the battery is not in use for long periods of time, please keep it when remains 30-40% Can extend the battery life if you keep it according to above

Caution

If don’t change the battery correctly, there is a risk of explosion Used batteries, please discard according to the supplier’s instruction

SSD installation instructions

Note: You must shut down the machine before installing the SSD, And you should choose 2282 size SSD.

1. Twist the SSD cover screw and remove the cover (as the picture shows)
2. Insert the SSD into the mini PCI-E interface, and then screw it to fix the SSD (as picture shows).
3. After assembly finished, Power on the laptop, Boot to the System desktop, right-click Item, and Choose Disk Management(as the picture shows)
4. Right-click the new disk(see below disk 0) pop-up Initialize Disk window and press “ok” to start the partition disk.(as the picture shows)
5. After finishing,right-click the “Disk 0”, Choose New Simple Volume(as the picture shows)
6. Keep Pressing “next” until you see “finish”(see the below picture)
7. boot into the desktop, open my computer file, you will see a new removable disk (as picture shows)

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of the Notebook at 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a distance of 0mm between the user’s body and the back of the Notebook.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>