TAZENI PB-13 Tablet Holder for Car Instruction Manual
- June 14, 2024
- TAZENI
Table of Contents
TAZENI PB-13 Tablet Holder for Car
Thank You
Thanks for choosing TAZENI! To bring you a fantastic experience, please read the manual before using.
Product Structure
Product Parameters
| Name | Tablet Holder for Car |
|---|---|
| Model | PB-13 |
| Applicable position | Headrest rod of car |
| Material | PC+ABS |
| Applicable device | 4.7-13.0 inches/ 130mm-230mm wide |
| Applicable poles width | 60mm-200mm 2.4-8.0 inches |
| Applicable poles type | Round |
| Support phone / tablets thickness | 27mm/1.0 inch |
| Can be folded | Yes |
| Product Weight | 238g |
Installation instructions
-
Loosen the fixing nut.
-
Put the rotating ball into the bolt through the fixing nut.
-
Tighten the fixing nut.
-
Clamp one of the poles with the clip.
-
Push the clamp clip to clamp the other pole.
-
Suitable for poles with a width from 60-200mm/ 2.4-8.0 inches.
*DO NOT FIT SQUARE POLES
-
Push the clamp clip to clamp the other pole.
-
Suitable for poles with a width from 60-200mm/ 2.4-8.0 inches.
*DO NOT FIT SQUARE POLES.
Using Steps
-
Lift the clamp arms to the highest, then put the tablet in.
-
Push the clamp back to hold the tablet tightly.
After Sale Service
As a responsible company, TAZENI always dedicates to bring great shopping experience for each customer. Please feel free to contact us if you have
3654
DAYS
Worry-free
365-Day Warranty.
24
HOURS
7*24h Easy-to-reach support
We will feedback within 24 hours
Manufacturer Name : Shenzhen Anyi E-Commerce Co., Lt
Address : Room 1512, 15th Floor, Building 1, Yicheng Huanzhi Center, Renmin Road, Jinglong Community, Longhua Street, Longhua District, Shenzhen.
Email: tazeniservice@outlook.com
Made in China