Hisense ERF6A40 AC Power TV Remote Control User Manual

Hisense ERF6A40 AC Power TV Remote Control

Product Information

Specifications

• Model NO : ERF6A40
• Frequency : [Frequency]
• Operating voltage : [Operating voltage]
• Working current : [Working current]
• Operating ambient temperature : [Operating ambient temperature]
• Number of buttons : [Number of buttons]
• Colour upper part : [Colour upper part]
• Colour lower part : [Colour lower part]
• Colour battery part : [Colour battery part]
• Painting : [Painting]
• Backlight : [Backlight]
• Logo : [Logo]
• Certification : [Certification]
• Certification report No.: [Certification report No.]
• Software version : [Software version]
• Software Configuration And Test Flow : [Software Configuration And Test Flow]
• Weight of the remote (no battery) : [Weight of the remote(no battery)]
• Size : [Size]
• Magnet Technology of key pad : [Magnet Technology of key pad]
• Key press force : [Key press force]

Product Usage Instructions

1. Step 1: Power Supply
   Ensure the remote has a battery with sufficient charge or insert new batteries (refer to the manual for battery type and installation instructions).

2. Step 2: Pairing with the Device
   Follow the device’s user manual to put it in pairing mode. Then, press and hold the desired button on the remote until the device recognizes the remote and confirms the pairing.

3. Step 3: Button Functions
   The remote has [Number of buttons] buttons for controlling various functions of the device. Refer to the device’s user manual to understand the specific functions assigned to each button.

4. Step 4: Backlight and Logo
   The remote features a backlight and logo. Press the designated button to activate the backlight for better visibility in low-light conditions. The logo represents the brand or manufacturer of the remote and is for aesthetic purposes.

5. Step 5: Adjusting Settings
   Some remotes may offer settings adjustment options. Refer to the manual or consult the manufacturer’s website for instructions on how to access and modify these settings.

6. Step 6: Maintenance
   Keep the remote clean and free from dust or liquid spills. Use a soft, dry cloth to wipe the surface. Avoid using abrasive cleaners or solvents that may damage the remote’s finish.

FAQ (Frequently Asked Questions)

• Q: How do I change the batteries?
  A: Refer to the manual for detailed instructions on battery replacement. Typically, you’ll need to open the battery compartment, remove the old batteries, and insert new ones following the correct polarity.

• Q: How do I know if the remote is compatible with my device?
  A: Check the device’s user manual or contact the manufacturer to verify compatibility. Additionally, some remotes may have a list o from partible devices mentioned in their manual or packaging.

• Q: Can I program the remote to control multiple devices?
  A: It depends on the specific model and its programming capabilities. Refer to the manual or contact the manufacturer for information on programming the remote for multiple devices.

ID

General Information

Circular navigation key ：230±50g

Remote Code

Operation

pairing method

• Automatic pairing
  Turn on the AC power of the TV, when the remote control has no pairing information, press any key (except the standby key and the voice key) on the remote control, the remote control needs to start sending the pairing broadcast packets defined by Hisense, and the broadcast packet sending time is 3 seconds; During the period when the device sends broadcast packets, the red indicator light flashes (on once per second, on for 500ms, off for 500ms), if the pairing is successful, the indicator (blue) flashes three times (on once per second, on for 500ms, off for 500ms); If pairing is unsuccessful, the indicator light returns to normal.

• Manual pairing
  Turn on the AC power of the TV, press and hold the “Menu” button on the remote control for three seconds, and after sending the infrared “Bluetooth pairing” key value, the red indicator light flashes during the pairing process (once per second, on for 500ms, off for 500ms), If the pairing is successful, the indicator (blue) flashes three times (once per second, on for 500ms, off for 500ms); if the pairing fails, the indicator returns to normal.

Unpair
When pairing is performed again after successful pairing, the unpairing operation will be performed. After successful unpairing, the indicator lights (blue and red) flash three times (once per second, on for 500ms, off for 500ms)

General requirements for indicator lights

• In the unpaired and paired unconnected state, the button red light flashes
• In the paired state, the button blue light flashes.

Definition of combination keys such as test mode

• Enter the production test mode : OK+Home+Volume decrease, OK+Home+Volume increase, OK+Home+CH+, OK+Home+CH-, OK+Home+Number 1; press different buttons to enter the test mode, the corresponding Bluetooth address is Different (each different Bluetooth address will correspond to a unique communication key), the corresponding Bluetooth address is (58-7E-61-00-0F-00, 58-7E-61-00-0F- 07).
• Exit test mode method: After the remote control hardware is reset, or by pressing the “OK+Input” key at the same time or overtime for 2 minutes, the remote control can return to normal mode;
• Press “OK+Home+Netflex” at the same time to enter the single-carrier transmission mode; after entering this mode, the red light is always on, and the center frequency point: 2442MHz
• By pressing the “OK+Power+Volume-” buttons at the same time, the remote control will enter the automatic aging mode; the blue light flashes, on for 500ms, and off for 500ms; through power-on reset or software reset, the remote control can exit the automatic aging mode .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>