VIVE 2QBP100 Tracking Tracker User Manual
- June 14, 2024
- Vive
Table of Contents
VIVE 2QBP100 Tracking Tracker User Manual
About the Tracker
Tracker(2QBP100) is a self-tracking device. Attach it to a real object or human body, and put yourself in the virtual reality applications.
- Tracker (2QBP100)
- Power button
- Status light
- POGO pin
- USB Type-C port
- Dongle (2QCD100)
- Dongle cradle
- Camera
Charging Tracker
Charging Tracker using the USB Type-C cable that came in the box.
Connect one end of the USB Type-C cable to Tracker and the other end to your
computer.
When Tracker is fully charged, status light will go back to the previous
status.
You can also use a power adapter with the USB Type-C cable to charge Tracker.
Turning Tracker on or off
To turn Tracker on, brief press the POWER button. The status light will turn
blue.
To turn Tracker off, press the POWER button for 5 seconds.
Using the dongle and pairing Tracker
The dongle needs to be connected to the headset for Tracker to be tracked.
Connect the dongle to your headset
- Connect the dongle to headset USB-C port.
- From your VR headset, turn on Wi-Fi, then go to Settings > inputs > Motion Trackers, pair new device.
- Press the Tracker POWER button for 2 seconds. The status light will blink blue.
- Wait for the status light to turn green or blink red/green. This means pairing is successful.
Status light
© 2023 HTC Corporation.
All Rights Reserved.
HTC and the HTC logo are trademarks of HTC Corporation (or HTC).