Pur Steam PUR010006N Steam Mop Cleaner 10 in 1 with Convenient Detachable Handheld Unit Instruction Manual

Pur Steam PUR010006N Steam Mop Cleaner 10 in 1 with Convenient Detachable Handheld Unit Instruction Manual

Please read all instructions carefully and retain for future reference.

Safety Instructions

• Please ensure that you read the full safety and operational instructions within the manual included with your steam mop.
• When using electrical appliances, necessary safety precautions should always be followed.
• This appliance is not intended for use by persons (including children) who are not mentally able, physically capable, experienced, or do not understand the product. They should be given instructions and they should be under supervision by a person responsible for their safety.
• Do not direct steam at people, animals, electrical appliances, or electrical outlets.
• Keep this appliance and cord out of reach of children.
• This appliance must not be used by children.

Warning

• Danger of scalding. Please use caution when using the steam cleaner.
• The steam emitted from the openings is very hot.
• Do not immerse the appliance in water.
• Do not leave the appliance unattended while connected to the main power supply.
• Do not leave the appliance connected to an electrical outlet when not in use.
• Never pull the power cord to disconnect the appliance from the socket but gently unplug it.
• Keep the appliance cord away from heat sources and sharp edges.
• Do not use the appliance with wet hands.
• Do not pull or carry the appliance by the cord, pull the cord around sharp corners, or expose the cable to heated surfaces.

Warning

• Do not use this appliance on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam sensitive materials.
• Do not use the appliance on any unsealed hard floor surfaces.

Note: Surfaces treated with wax and some non-wax floors may lose their shine due to the heat and steam action. It is recommended to test an isolated surface area before proceeding with cleaning the larger surface.

• Never add de-scaling, aromatic, alcoholic or detergent products into the steam mop as this may cause damage to the unit. Doing it so will void your warranty.
• This appliance gets very hot during use, exercise extreme caution.

Note: Always wear suitable shoes when using this appliance and when changing the accessories; do not wear slippers or open-toed footwear.

• The microfiber cleaning pad must be installed correctly before use.
• All repairs should be carried out by a qualified engineer. Improper repairs may place the user at serious risk of harm.
• This appliance is intended for household use only.
• It should not be used for commercial purposes.
• Never leave the steam mop standing in an upright position, on a floor area while the unit is ON for longer than 5 sec. Leaving the mop in this position may cause a build-up of a pale residue on the surface.
• It is recommended that you use filtered or de-mineralized water.
• When cleaning hobs and ovens, you must not direct the steam towards any electrical connections. Please ensure hobs and ovens are fully cooled before attempting to clean.
• Ensure the device is disconnected from the outlet before cleaning.
• Do not use this appliance for any purpose other than that for which it is designed.
• Do not use the appliance if it has been dropped or damaged in any way.
• If the supply cord or plug is damaged please contact Pur Steam Customer Service. Descript

Description of Parts

• Angled nozzle

• Scrape tool

• Double brush tool

• Big brush tool

• Small brush tool

• Steamer jet

• Steamer attachment

• Squeegee attachment

• Funnel

• Cup

• Steamer Cloth

• Carpet Glider

• Microfiber Cloth

Instructions For Use

Slide the bottom end of the steam mop body onto the mop head until the mop head spindle locks into place. Hold both parts of the unit and gently push the clip into the handle. This will lock the two parts into position.
Warning: Never force the steam mop body onto the mop head, as this could potentially damage the steam mop. Always attach the mop head using both hands, ensuring it locks into place correctly.

The steam head can be removed from the main body by pressing the Steam mop base release button, located on the steam head spindle.

Attaching a Microfiber Cloth
Position the microfiber cloth onto the Mop head and secure it. Make sure to match each Velcro piece on the cloth to the corresponding spike on the Mop head and press firmly to stick them together.

Attaching the Carpet Glider
Position the macrofibre cloth into the Mop head and place the carpet glider over and around the microfiber cloth. To remove, simply push the carpet glider by foot.

Filling the Water Tank
Open the water tank cap and fill the tank with 380 ml (~ 120z) of water using the funnel and the measuring cup.

Filling the Tank During Use
Turn off the switch (1) then open the tank to pour in the water (2). Seal the tank and turn on to activate the steam.

Warning: Never place de-scaling, aromatic, alcoholic or detergent products in the steam mop tank, this will cause damage to the appliance and void your warranty.
Using the Steam Mop
Plug in the Steam Mop into an electrical outlet and switch it on. It will take approximately 30 seconds for the Steam Mop to preheat after which it is ready for use.

The steam will run continuously until the unit is turned off or the water runs out. A full tank of water will produce approximately 12 minutes of steam at the maximum setting and approximately 25 minutes at the lowest setting.

When the tank runs out of the water, the pump inside will make a sound and e vibrate at which time you need to turn off the Steam Mop immediately and re-fill the water tank before using it again.

Using the Mop as a Hand Held Steamer/ Steam Cleaner
Press the Steam Mop base release button to remove the base from the main body.

Install the Steamer jet or the Steamer attachment at the top of the steam mop body by pushing it in. Before attaching any accessories onto the Steamer jet or the Steamer attachment, make sure it is locked in the position. Choose the attachment you would like to use on the Steamer jet, and install it by aligning with the arrow indicator on Steamer Jet, then turn it clockwise.

Take off the accessories after the use and re-attach the main body back into the Steam Mop Body.
Warning: Extremely Hot!
Folding Handle
Press the collapsible handle release button to fold the handle and store the unit.

Press the collapsible handle release button to fold the handle and store the unit.

Accessories

Big and Small Brush Tool
WARNING: Brush Tools may scratch some surfaces.| | Ovens, hobs, showers, bath tubs, tiles, toys, refrigerators, etc.
Angled Nozzle| | Stove tops, taps, sinks, hard to reach areas etc.
Double Brush Tool| | Cleaning grout lines, sanded or non-sanded.
Scrape Tool| | Scraping baked on food, grime and grease. Removing residue or other substances from surfaces such as hobs/cooktops and ovens.
Steamer jet|     | Sink, gas stove, faucet grout, microwaves oven, range hood, hard to reach area etc. It also serves as an accessory adapter to attach one of the small tools: Double Brush Tool, Scrape Tool, Angled nozzle, Big Brush Tool or the Small Brush Tool.
Squeegee Attachment| | Shower screens, mirrors and glass. Remove creases from sofa, tablecloths etc.
Garment steamer and Garment cloth| | Steaming sofa, tablecloths and garment etc.
Microfiber Cloth| | Cleaning hard floors.
Carpet glider| | Cleaning carpets.
Funnel and Measuring cup| | To measure the water when adding to steam mop base.

Cleaning and Maintenance

Before cleaning, ensure the appliance is unplugged and has cooled down. Drain any remaining water from the base every time you finish with steaming.
**Clean the accessories in warm, soapy water and leave them to air dry.**

Decalcifying the Water Tank Interior
To clean calcium deposits that build up inside the water tank, add one or two tablespoons of white vinegar to a full tank/base and then shake. Let it sit for a few hours. Then, empty the water tank and refill with clean water and empty until itrinses clear.
Note: When decalcifying, make sure the steam mop is not plugged in.
Removing Lime-scale
If you notice that the appliance has begun producing steam more slowly than usual or has completely stopped producing steam, you may need to remove limescale.

Limescale can develop over time on the metal parts of the appliance and significantly affect its performance. It is recommended to remove limescale on a regular basis or after every 25-50 times you use a full tank of water, or at least once a month, especially in areas with hard water.

The frequency of removal depends on the hardness of your tap water and how often you use your steam mop. If you live in an area with hard water, you may need to use de-mineralized water.

To remove lime scale from the unit please follow these steps:

1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank
2. Secure and position the unit to ensure any steam released is aimed away from the floor or surrounding objects and surfaces.
3. Plug the appliance into the outlet and turn it ON. Allow the unit to produce steam until all the solution is used.
4. Repeat the above procedures as many times as necessary until a normal steam flow is achieved and then fill the tank with fresh water and rinse.
5. Fill the tank to the max. level with fresh water, turn ON the unit and then release the steam through the system until the water tank is empty.

Warning: Do not leave the steamer unattended during the limescale removal process.
Note: Perform a test on a small isolated surface after limescale removal to e ensure there is no debris left in the unit.

Cleaning the Microfiber Cloths

The microfiber cloths are machine washable. You may wash them in warm water. Always use a mild detergent and avoid fabric softeners. Air dry only.

Note: Never use bleach or fabric softener when cleaning the microfiber cloths.

Storage
Remove the water tank and empty out any residual water, then clean the outer surface with a dry cloth.
Remove the cleaning pad and wash it, so it is ready for future use. Store the appliance in a dry area out of reach of children.

Troubleshooting

in the Cleaning and Maintenance section in this user guide.
The steam button is not pressed.| Press the steam button.
Steam control knob is set to MIN.| Turn the steam control knob clockwise to MAX.
There is no power to the unit.| Ensure the appliance is plugged in and turned ON.
Unit will not turn ON| The unit is not plugged in.| Make sure that the unit is plugged into a proper outlet and that the switch is ON.
Blown fuse or breaker.| Check your fuse or breaker.
Steam mop body not properly attached.| Make sure that the Steam mop body is securely attached onto the Steam mop head.

SPECIFICATION:

• Product Code: Therma Pro 211
• Rated Voltage: 120V
• Rated Frequency: 60 Hz
• Output Power: 1550 W
• Water Tank Capacity: 12.8 fl oz /380 ml
• Steam Temperature: 212°F

1-Year Limited Warranty
This product is warranted to be free from defects in material and workmanship under normal use and service for one year from the date of the original purchase with the receipt. The manufacturer’s obligation shall be limited to repairing or replacing any part of the product that is defective. Such warranty shall not apply to damages resulting from accidents, abuse, or misuse.

**350 Springfield Avenue, Suite #200, Summit, NJ 07901
E-mail: support@pursteam.us
Web: www.pursteam.us
**

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>