Goldair GCWF100 40cm Wall Fan with Remote Instruction Manual
- October 26, 2023
- GOLDAIR
Table of Contents
Operating Instructions
40cm Wall Fan with Remote
Model: GCWF100
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, and sides of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
- If your appliance does not work, or is not working properly, contact the place of purchase. Repairing work on the appliance by unqualified persons can cause serious risk to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, and clothing, away from the blade of the fan during operation to reduce the risk of injury to the person and/or damage to the unit.
- Switch off and use handles provided when moving.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, an undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place the appliance close to a radiant heat source.
- Never operate in areas where petrol, paint or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
- Never connect the appliance to the mains supply until completely assembled and adjusted.
- Never remove the plug from the power socket until the appliance has been switched off.
- Never remove the plug from the power socket by pulling the cord – always grip the plug.
- Never twist the kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surroundings of a bath, a shower, or a swimming pool, or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in households and similar applications such as staff kitchen areas in shops, offices, and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments, and other residential type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Has the appliance been checked and repaired by a qualified electrician if repair is necessary?
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Frigidaire Gallery Refrigerator Rev...
Frigidaire Gallery Refrigerator Review
Components
1. Front Grill
2. Fan Blade Nut
3. Fan Blade
4. Rear Grill Screw
5. Rear Grill
6. Motor Shaft
7. Motor Housing
8. Tilt Neck| 10. Speed cord
11. Oscillation cord
12. Wall Mounting Bracket
13. Wall Plugs
14. Fixing Screw
15. Grill Screw
---|---
Assembly
-
Remove the rear grill retaining screw from the motor shaft.
-
Fit the rear grill by positioning it on the location pins. Secure the grill to the motor housing with the rear grill retaining screw.
-
Push the fan blade onto the motor shaft by matching the slots on the base of the blade with the shaft pin.
-
Secure the blade with the fan blade nut by turning it counter-clockwise.
-
Check that the fan blade rotates freely by turning it with your hand.
-
Open securing clips around the front grill and loosen the grill screw at the bottom of the front grill. Position the top clip on the uppermost part of the rear grill.
-
Push the top clip down and press the rim of the front grill onto the rear grill.
-
Close all clips around them to fit and tighten the safety screw.
Mounting to Wall
- Select an appropriate location and fix the wall mounting bracket onto a strong wall (or locate a stud behind plaster boards) with three wall plugs and fixing screws supplied.
- Note: Consider a location within a distance of 0.8m from a wall power outlet to make sure you can plug the unit into the PowerPoint easily.
- Mount the wall fan on the mounting bracket and plug into the unit.
- If the power cord is hanging loosely between the fan and the power outlet, make sure it will not touch or obstruct fan blade rotation or fan oscillation in any way.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety
precautions outlined.
Ensure all packaging has been removed from the unit before use.
WARNING: Keep all objects at least 1 meter from the front and sides of
the appliance
Fan control
You can control your wall fan either with the remote control or with the
buttons on the control panel.
Press the “ON/SPEED” button. To start the fan at a low speed.
Press the same button to choose between low, medium, and high speed.
Press the “SWING” button to switch on the oscillation mode.
Press the “OFF” button to turn off the fan.
Timer
Press the “TIMER” button repeatedly to change the timer setting. The time
increases in increments of 0.5 hours and it has 4-time steps in total, which
add up to set your desired timer setting. The maximum timer setting is 7.5
hours.
For example, to set the time for 5 hours, press the timer button repeatedly
until the indicator lamps “1h” and “4h” are on at the same time.
Do not press the timer button if you want to keep your fan operating manually.
The timer indicator lamps will not light up if the timer button is not
pressed.
Remote Control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit.
Position the unit so the receiver lens is visible from the remote control.
The symbols on the remote correspond to the symbols on the main unit Ensure
batteries are inserted in the correct direction.
Do not mix battery types.
When replacing, ensure both batteries are changed simultaneously.
2 x AAA-size batteries are required.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Cleaning
The fan requires regular cleaning to ensure trouble-free operation.
Ensure that the fan is switched off from the supply mains before removing the
guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user-serviceable parts. For
service or repair, contact an authorized electrical service technician.
PROOF OF PURCHASE
To receive a warranty retain the receipt as proof of purchase. (Refer to the
back of the booklet).
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@goldair.co.nz| Goldair – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
---|---
One Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of one year. In non-domestic use, Goldair limits the voluntary warranty to
three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand, this warranty is additional to the conditions and guarantees
of the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
---|---
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty
card)
Name……………………
Address………………………………………
Place Of Purchase………………………..
Date of Purchase…………………………
Name Of Product…………………….
Model Number………………………
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.