KOORUI MK082 Mechanical Gaming Keyboard User Manual
- June 10, 2024
- KOORUI
Table of Contents
KOORUI MK082 Mechanical Gaming Keyboard
TECH SPECS
- Keys: 82
- Switch type: mechanical
- Switch rating:> 50 million presses
- Key mute: 3.8 ± 0.3 mm
- Backlight: 16 Million RGB
- Interface: USB 2.0
- Cable length: 1.8 m
- OS support: Windows XP/Vista/7/8/9/10/11、MAC OS、Linux
PRODUCT PRESENTATION
FEATURES
- Backlit gaming keyboard with a slim bezel design
- Advanced anti-ghosting with full-key rollover support
- Multimedia functions
- Rainbow backlight with mixed ccolors
- Waterproof design to quickly drain the liquids In case of accidental spillage
SYSTEM REQUIREMENTS
PC system or compatible with USB port available;
OS support: Windows XP/Vista/7/8/9/10/11、MAC OS、Linux
SAFEIYNOTES
- Keep the equipment dry. Keep away from precipitation, humidity, all types of liquids and condensation.
- Do not use the product with wet hands.
- Do not use or store the equipment in dusty or dirty areas.
- Do not store the equipment under high-temperature or low-temperature conditions (this may damage it).
- Do not drop, knock or shake the equipment (use may result in breakage).
INSTALLATION
Connect the keyboard to an available USB port on your computer.
If the keyboard is used for the first time wait approx. 15 seconds to install
the generic driver.
USE
Configuring the keyboard and using the special functions is done by using
the various key combinations detailed below.
-
Usage method: The function of the multi-function control knob is very useful. Press it to play/pause. Turn it counterclockwise to reduce the volume, and turn it clockwise to increase the volume
The keyboard has three connection modes: Bluetooth connection, 2.4G connection and USB connection. Please select your keyboard connection mode first.
If you choose Bluetooth connection, please refer to the Bluetooth mode connection method of FN+Q/W/E key combination in the following table.
If you choose 2.4G connection, please insert the receiver into the USB port of your computer, and then refer to the 2.4G connection method of FN+R key combination in the following table If you choose USB cable connection, please connect your computer’s USB hole with the power cable provided, and then toggle the switch on the back of the keyboard to USB to connect successfully
If you want turn off the keyboard switch, Please turn the switch on the back of the keyboard to the middle position with the “USB” character
-
Multi-function control knob
The function of the multi-function control knob is very useful. Press it to play/pause. Turn it counterclockwise to reduce the volume, and turn it clockwise to increase the volume -
Smart sleep mode
Deep sleep: The keyboard enters deep sleep mode after 30 minutes of keyless operation. Bluetooth is disconnected. Press any key to wake up the keyboard backlight and reconnect the device
Smart sleep: The keyboard backlight will turn off after one minute of keyless operation. Press any key again to wake up the keyboard backlight and reconnect the device
Multimedia and office functions
TROUBLESHOOTING
In case of incorrect operation follow the steps below:
- Check the integrity of t he connectors;
- Check the connection to the computer correctly;
- Check the correctness of your computer settings;
- Disconnect and reconnect the equipment; restart the computer.
If the problem persists, please contact your local seller
GENERAL INFORMATION
-
Unauthorized repairs or disassembly of the product will void the warranty and may cause its damage.
-
This product is safe and complies to EU requirements.
-
This product is manufactured conforming with the European RoHS standard.
This standard was introduced to reduce the amount of electrical and electronic waste emitted into the atmosphere. -
Using the WEEE symbol (the crossed-out bin) indicates that this product is not household waste. When recycling waste properly, you protect the environment and people health. Segregated household waste collection, aids recycle materials and components used for the production of this device. Fvr detailed information about recycling, please contact your retailer or a local authority.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Warranty Card
Product Model:
Order Number: ____
Date of Purchase : ____
Customer Name:
TEL:
Address: ____
Distributor Name: ——————
TEL:
Warranty Card is the important certificate for after-sale service of Marvo
products, please keep it safe.
If you think our product is good , We are very glad to see you recommend it to
your friends. If you encounter problems that cannot be solved during the use
of our products, please contact us by email
(support@koorui.net) in time, and we will contact
you within 24 hours to help you solve the problems.
Please remember our after-sales email:
support@koorui.net
NOTE : Specifications and design are subject to change without notice due
to product improvements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>