KOORUI 15B1 Portable Monitor User Manual
- June 14, 2024
- KOORUI
Table of Contents
User Manual
KOORUI Monitor
15B1 Portable Monitor
Product Parameters
Product Parameters | Physical |
---|---|
MODEL NO. | 15B1 |
Display | Power Type |
LCD Technologie | IPS |
Screen Size | 15.6 Inches |
Screen Shape | FLAS |
Reaction Time(G/G) | 5ms |
Pixel Spacing | 0.17925×0.17925mm (W x H) |
Display Color | 16.7M colors |
Image Ratio | 16:09 |
Perspective(typ.) | 200cd / m2 |
Resolution | 1920×1080 |
Maximum Refresh Rate | 60Hz |
Betrachtungswinkel(H/V) | 178°/178° |
Static Contrast | 1000: 1 |
Dynamic Contrast | 20000000: 1 |
NCSI Solor Gamut | 45% |
Model Type | Digital signal |
Language | English, Chinese, German, Japanese, Italian, French optional |
Working Temperature | 0∼40°C |
Storage Temperature | -20∼60°C |
Eye Protection Mode | Yes |
Built-in Speaker | Yes |
Chapter I Attention
1.1 Safety precautions
Warning A serious or fatal injury may result if instructions are not
followed.
Caution Personal injury or damage to properties may result if instructions are
not followed.
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION:
TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO PROFESSIONAL.
| This symbol indicates that high voltage is present inside, It is dangerous
to make any kind of contact with any internal part of this product.
---|---
| This symbol indicates that this product has included important literature
concerning operation and maintenance.
| Class Il product:
This symbol indicates that a safety connection to electrical earth (ground) is
not required.
If this symbol is not present ona product with a mains lead, the product MUST
have a reliable connection to protective earth (ground).
| AC voltage: Rated voltage marked with this symbol is AC voltage.
****| DC voltage: Rated voltage marked with this symbol is DC voltage.
| Caution. Consult instructions for use: This symbol instructs the user to
consult the user manual for further safety related information.
1.2 Storage precautions
- Keep away from water sources or damp places, such as bathrooms, kitchens, basements, swimming pools, etc.
- Ensure that the equipment is installed and placed smoothly. If it falls, it may cause human injury or equipment damage.
- Store in a cool, dry and ventilated place, and do not approach radiation sources and heat sources.
- Do not cover or plug the ventilation holes in the back shell, and do not use them on beds, sofas, blankets or similar surfaces.
- The power supply voltage range of equipment operation is indicated on the label of the back shell. If the supplied voltage cannot be determined, consult the local power company.
- When the monitor is not used for a long time, please cut off the power supply to prevent the damage of the motor and abnormal power supply voltage in thunderstorm days.
- Do not overload the socket, which may cause fire and electric shock.
- Please do not put foreign bodies into the machine, which may cause short circuit or cause fire and electric shock.
- Please do not disassemble or repair this product by yourself. If there is any fault, please contact the after-sales service personnel directly.
- Please do not pull or twist the power cord excessively.
1.3 Securing the installation space
Make sure to have enough space for ventilation when placing the product. An
internal temperature rise may cause fire and damage the product. Maintain
enough space around the product as shown in the diagram when installing the
product.
1.4 Protection recommendations:
Suggestions for eyes
In order to avoid eye fatigue and pain in neck, arms, back and shoulders
caused by long-term use of the monitor, please pay attention to the following
points:
- Place the monitor 20-28 inches away from both eyes (about 50-70cm).
- Use the monitor to keep the eyes moist or increase the blinking frequency.
- After using the monitor for 2 hours, please rest for 20 minutes.
- When resting, leave your eyes away from the monitor and look at the distance for 20 seconds.
- When resting, stretch or relieve your neck, arms, back and shoulders.
Low blue light description
The blue light wavelength is in the blue light band, and the display has
the function of reducing blue light emission. Can select “eye protection mode”
in the menu to protect your eyes.
Cleaning your monitor
To clean your screen, lightly dampen a soft, clean cloth with water. If
possible, use a special screen-cleaning tissue or solution suitable for the
anti static coating. Do not use benzene, thinner, ammonia, abrasive cleaners
or compressed air.
1.5 Precautions for moving the product
- Do not directly apply pressure on the screen.
- Do not hold the screen when moving the product.
Chapter II Preparation before use
2.1 Accessories:
Your monitor is equipped with the following components. Please check whether
all parts have been received. If there are any omissions, please contact
Koorui.
2.2 Interface and data line connection
Port | Interface Name | Port description |
---|---|---|
Type-C | Connects to a PC using a Type-C cable. |
Connects to DC using a Type-C cable.
| MINI HDMI PORT| Connects to a PC using a HDMI cable.
Warm Tips:
- Does not support Type-C headphones.
- Use Mini HDMI to connect the display, and additional power supply is required to display normally.
- When there is only one Type-C connection, the maximum brightness is 50%; when you need to increase the brightness to 100%, you need to increase the power input.
Connecting and using a PC
- Choose the connection method that suits your PC.
- Connecting parts may vary from product to product.
Connecting and using source devices
Read below before installing the product.
- Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device.
- Before connecting signal cable, make sure you remove the power cables from both the product and the external device to prevent damage to the product due to a short circuit or over current.
- After all signal cables have been properly connected, connect the power cables back to the product and the external device.
- After installation is completed, make sure you read the user guide to acquaint yourself with the product functions, precautions and other information required to use the product properly.
Please read the user guide provided by the source device for the operation
mode of the source device. The original device signal is abnormal. It is
recommended to contact the source device manufacturer first.
If you need assistance, please contact Koorui after-sales staff.
2.3 Adjusting the product tilt
The monitor supports five angle applications.
Placement 1: Adjustable 67.4+3° with the horizontal plane
Placement 2: Adjustable 80.15+3° with the horizontal plane
Placement 3: Adjustable 69.35+3° with the horizontal plane
Placement 4: Adjustable 58.5+3° with the horizontal plane
Placement 5: Adjustable 45.00+3° with the horizontal plane
Chapter III OSD function
The OSD function information table of this product is as follows. If there is any doubt about the operation process, please consult Koorui after-sales staff.
M| Menu| Long press 3S: Power off or Power on.
Short press: Pop up the main menu / Enter the next menu.
With progress bar, it is to return to the previous menu after confirmation.
---|---|---
M
Power light| Long
Lamp| light: normal power-on state;
Blinking: Power saving standby state.
Off: Monitor is off
+| Left| Display menu status:
Without progress bar status, with selection down.
With progress bar state, progress bar incremental.
Without display menu state: brightness hotkey
–| Right| Display menu status:
Without progress bar status, return to previous menu level or exit menu;
With progress bar state, progress bar decrementing;
Without display menu status: preset mode hotkey.
First order menu| Secondary menu| Tertiary menu|
Description
---|---|---|---
Display| Brightness| | Can adjust the brightness of your display by pressing
the left and right key -h.
Contrast| | Can adjust the Contrast of your display by pressing the left and
right key -A-.
Color| Warm| /| When confirmed, Turn on warm color temperature mode.
Cool| /| When confirmed, turn on cool color temperature mode.
User| | Adjust the red saturation level. The closer the value is to 100, the
greater the color intensity is.
| Adjust the green saturation level. The closer the value is to 100, the
greater the color intensity is.
| Adjust the red saturation level. The closer the value is to 100, the greater
the color intensity is.
Input| HDMI| | Select HDMI Signal Input.
Type-C| | Select Type-C Signal Input.
Function| Language| English| After confirmation , the OSD menu options will be
changed to English language.
Chinese| After confirmation , the OSD menu options will be changed to chinese
language.
French| After confirmation , the OSD menu options will be changed to French
language.
German| After confirmation , the OSD menu options will be changed to German
language.
Italiano| After confirmation , the OSD menu options will be changed to
Italiano language.
Spanish| After confirmation , the OSD menu options will be changed to Spanish
language.
Korean| After confirmation , the OSD menu options will be changed to Korean
language.
Japanese| After confirmation , the OSD menu options will be changed to
Japanese language.
Russian| After confirmation , the OSD menu options will be changed to
Traditional Russian language.
Traditional Chinese| After confirmation , the OSD menu options will be changed
to Traditional Chinese language.
Vietnamese| After confirmation , the OSD menu options will be changed to
Traditional Vietnamese language.
Portuguese| After confirmation , the OSD menu options will be changed to
Traditional Portuguese language.
Arabic| After confirmation , the OSD menu options will be changed to
Traditional Arabic language.
| OD| On| Turn on OD acceleration, and GTG response time is 5ms.
Off| Turn off OD acceleration.
| Power off| On| Turn on Auto power off after 1min.
Off| Shutdown Auto power off after 1min.
| Reset| | In addition to OSD language, you can reset your other option
settings and revert to the factory settings of the product.
Precautions:
- When you are not watching movies or games, it is best to set the response time and mode to standard.
- Under dynamic contrast, brightness and contrast cannot be adjusted.
- Standard mode, get the clearest display effect, and adjust it according to your preference.
- Cinema mode, eye protection mode, FPS mode and RTS mode cannot adjust brightness and contrast.
- Eye protection mode cannot adjust color temperature.
- If you have any other questions, you can consult Koorui customer service staff.
Chapter IV Common Applications
(In the case of Windows 10)
4.1 Resolution, and refresh rate settings
4.1.1 Resolution settings
Windows Settings → System → Screen → Display Resolution
4.1.2 Refresh rate setting
Windows Settings → System → Screen → Advanced Display Settings → Refresh Rate
In Multiple Screen Control, in Advanced Display Settings, select the display
you want to set.
4.2 Display expansion
Screen expansion function setting.
Windows Settings → System → Screen → Multiple Display Settings → Select
“Expand This Display”
4.3 Personalized fonts
(Including: blurred fonts, desktop fonts with colors)
Windows Settings → Personalize → Font → Adjust ClearType text and change Turn
on ClearType.
Chapter V Q&A
- The following table lists some common monitor problems that you may encounter and their solutions.
- If you can’t solve your difficulties, please contact Koorui customer services.
- Official website: http://www.koorui.net/
- E-mail: support@koorui.net
Problems | Solution measures can be taken |
---|
Blank spaces are found on all four sides of the screen when an HDMI or VGA
cable is connected to the product and PC.| The blank spaces found on the
screen have nothing to do with the product. Blank spaces on the screen are
caused by the PC or graphics card. To resolve the problem, adjust the screen
size in the HDMI or DP settings for the graphics card.If the graphics card
settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.(Please contact the graphics card
or PC manufacturer for further details about how to adjust the screen
settings.)
The power LED is off. The screen will not switch on.| Check that the power
cable is connected properly.
If a problem occurs with the monitor screen, run Self Diagnosis to check that
the monitor is working properly.
Not Optimum Mode is displayed.| This message appears when the signal from the
graphics card exceeds the maximum resolution or frequency for the product.
Change the maximum resolution and frequency to suit the product performance.
The images on the screen look distorted.| Check the cable connection to the
product.
The screen is not clear. The screen is blurry.| Remove any accessories (video
extension cable, etc.) and try again. Set the resolution and frequency to the
recommended level.
The screen appears unstable and shaky. There are shadows or ghost images left
on the screen.| Check that the resolution and frequency for the PC are within
the range of resolution and frequency compatible with the product. Next, if
required, change the settings, referring to Standard Signal Mode.
The screen is too bright. The screen is too dark.| Adjust Brightness and
Contrast.
Screen colour is inconsistent. The colours on the screen have a shadow and are
distorted. White does not really look white.| Change the Color settings.
There is no image on the screen and the power LED blinks every 0.5 to 1
second.| The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating
mode.
Observe whether the computer operates or restarts the device through the PC
keyboard Cas Lock.
Video playback is choppy.| Playback of high-definition large video files can
be choppy. This may be because the video player is not optimised for the PC
resource. Try playing the file on another video player.
An energy efficiency prompt appears on the monitor or “XXS Power down. MENU
Key Cancel” appears in the upper left corner of the monitor.| When you buy and
sell European products, European regulations have energy efficiency
requirements.
The monitor quickly goes to a black screen state (no display).| Under the
power setting state, the monitor is turned off for a short time windows
settings ==>system ==>power and sleep ==>screen ==>Reset the TIME
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>