Adam 1120011156 ATP Thermal Printer User Manual

Adam 1120011156 ATP Thermal Printer

Easy Reference:

Serial number of the printer:|
---|---
Model   of   the   product  linked   to   this printer:|
Software revision number of the product linked to the printer:|
A serial number of the product linked to the printer:|
Date of Purchase:|
Name of the supplier and place:|

INTRODUCTION

• The Adam Thermal Printer is a general-purpose thermal tally roll printer specifically designed to work with the Adam series of balances.
• The printer comes preset to work with the default RS-232 interface found on the Adam balances but can easily be changed to work on other equipment as well.
• The printer is easy to use with only an On/Off switch and a paper feed button.

SETTING UP

CAUTION:

• Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
• Avoid unstable power sources. Do not operate near large users of electricity such as welding equipment or large motors.
• Avoid high humidity that might cause condensation, and keep away from direct contact with water.

IMPORTANT

Clean the print head regularly to avoid poor print quality, only attempt to clean when the printer is off and the head has had time to cool. Clean with a soft cloth using diluted alcohol.

TECHNICAL SPECIFICATIONS

• Print method： Thermal line printing
• Paper width： 57.5 ± 0.5mm
• Effective print width： 48mm
• Print speed： 50mm/s or 14 lines/s
• Print Head Performances：
  • Print columns： 384 dots/line or 8 dots/mm
  • Reliability print： 50Km
• Interface:
  • Serial interface: D-SUB 25 socket, optional baud rate 2400bps, 4800bps, 9600bps、19200bps、38400bps，57600, 115200, default is at 4800bps, data structure no parity, 8 digital word size,1 digital stop bit, supports RTS/CTS and XON/XOFF handshake protocol.
  • Cash drawer wire RJ-11 socket， DC 12V/1A output signal to drive the cash drawer.
• Characters: ASCII character set：12×24 dot，1.25（W）×3.00（H）mm
• Print paper：
  • Paper type： Thermal print paper
  • Paper width： 57.5±0.5mm,
  • Paper thickness： 0.06～0.08mm
  • Roll outer dia. (max.）： Φ65mm
  • Roll inner dia. (min.）： Φ12mm
  • Recommend thermal print paper: ADAM
  • Box of 10 – part number 3126011281
  • Box of 20 – part number 3126011282
• Printer power adaptor:
  • Adaptor input voltage： AC 110V/220V，50～60Hz
  • Adaptor output voltage： DC 8.5V/3A
• Printer weight ：0.8kg
• Overall dimensions： 114（W）× 184（D）× 90（H）mm
• Working temperature: 0～45ºC
• Working relative humidity： 10～80%

PRINTER INSTALLATION AND OPERATION

Packing List

RS 232 (25 pin to 9 pin)

cable – female

| 3124011279| 1
RS 232 (25 pin to 9 pin)

cable – male

| 3124011273| 1
Thermal paper| 3126011263| 1
Manual| 3126611270| 1

Printer connection

• Please connect the cables as shown.
• Make sure the printer and HOST machine are powered off and connect the data communication cable to the SERIAL PORT The RJ-11 jack is for use when connecting the printer to a cash drawer.
• Connect the Power adaptor to the printer and electricity supply (c) Turn the printer on using the ON/OFF switch located at the rear of the printer

PAPER ROLL INSTALLATION

The thermal paper is fitted as below

• Open the top cover
• Place the paper roll into the space provided in the following way.
• Pull the leading edge of the paper outside of the printer and then close the top cover.
• Tear off the excess paper using the cutter in the top cover

FRONT PANEL DESCRIPTIONS

• FEED key： To feed the paper through
• POWER light： Power light to indicate POWER is supplied to the printer
• ERROR light： To indicate a paper jam or problem with printing
• PAPER light: To indicate the printer is out of paper

SERIAL INTERFACE

Pin definition of serial interface：

control code XON/XOFF

to the host machine.

3| RXD| Host machine| The printer receives data from

the host machine

4| RTS| Printer| This signal indicates the printer status, low level indicates printer busy, can not receive data, the high level indicates

printer ready, can receive data.

7| GND| ——| Ground signal
20| DTR| Printer| Same with RTS signal(pin 4)

All Adam Equipment scales and balances use a 3 wire cable connection which includes TXD, RXD and GND. DTR and RTS are not required

ATP BAUD RATE SETTING INSTRUCTIONS

Please contact Adam Equipment to obtain the application tool required

1. Connect the ATP to your PC using the cable provided
2. Power ON the ATP
3. Open the ATP baud rate setting application
4. Select the COM port that your PC is using
5. Select the current baud rate that your ATP is set to(default is 9600)
6. Select your required baud rate from the drop down list on the right hand side
7. Click on “Set Default Baud rate”
8. Click Close
9. Power your ATP OFF and then ON again

COMMAND FUNCTION LIST

WARRANTY INFORMATION

• Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery.
• During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorised Technician reserves the right to repair or replace the components at any of its workshops depending on the severity of the problems. However, any freight involved in sending the faulty units or parts to the service centre should be borne by the purchaser.
• The warranty will cease to operate if the equipment is not returned in the original packaging and with correct documentation for a claim to be processed. All claims are at the sole discretion ofAdam Equipment.
• This warranty does not cover equipment where defects or poor performance is due to misuse, accidental damage, exposure to radioactive or corrosive materials, negligence, faulty installation, unauthorised modifications or attempted repair or failure to observe the requirements and recommendations as given in this User Manual. Additionally rechargeablebatteries (where supplied) are not covered under warranty.
• Repairs carried out under the warranty does not extend the warranty period. Components removed during the warranty repairs become the company property.
• The statutory right of the purchaser is not affected by this warranty. The terms of this warranty is governed by the UK law. For complete details on Warranty Information, see the terms and conditions of sale available on our web-site.

Manufacturer’s Declaration of Conformity

This product has been manufactured in accordance with the harmonised European standards, following theprovisions of the below stated directives:

• Electro Magnetic Compatibility Directive 2004/108/EC Low Voltage Directive 2006/95/EC
• Adam Equipment Co. Bond Avenue, Denbigh East Milton Keynes, MK1 1SW United Kingdom

FCC COMPLIANCE

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
• Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device.
• Changes or modifications not expressly approved by Adam Equipment could void the user’s authority to operate the equipment.

WEEE COMPLIANCE

Any Electrical or Electronic Equipment (EEE) component or assembly of parts intended to be incorporated into EEE devices as defined by European Directive 2002/95/EEC must be recycled or disposed using techniques that do not introduce hazardous substances harmful to our health or the environment as listed in Directive 2002/95/EC or amending legislation. Battery disposal in Landfill Sites is more regulated since July 2002 by regulation 9 of the Landfill (England and Wales) Regulations 2002 and Hazardous Waste Regulations 2005. Battery recycling has become topical and the Waste Electrical and Electronic Equipment (WEEE) Regulations are set to impose targets for recycling.

ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40 years experience in the production and sale of electronic weighing equipment. Adam products are predominantly designed for the Laboratory, Educational, Health and Fitness, retail and Industrial Segments. The product range can be described as follows:

• Analytical and Precision Balances
• Compact and Portable Balances
• High Capacity Balances
• Moisture analysers / balances
• Mechanical Scales
• Counting Scales
• Digital Weighing/Check-weighing Scales
• High performance Platform Scales
• Crane scales
• Health and Fitness Scales
• Retail Scales for Price computing

For a complete listing of all Adam products visit our website at www.adamequipment.com

© Copyright by Adam Equipment Co. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice. All information contained within this publication is to the best of our knowledge timely, complete and accurate when issued. However, we are not responsible for misinterpretations which may result from the reading of this material. The latest version of this publication can be found on our Website. www.adamequipment.com

FREQUENTLY ASKED QUESTIONS

What is the Adam 1120011156 ATP Thermal Printer?

The Adam 1120011156 ATP Thermal Printer is a thermal printer designed for use with Adam Equipment balances and scales. It enables the printing of weight and measurement data for documentation and record-keeping purposes.

Is the ATP Thermal Printer compatible with all Adam Equipment balances and scales?

The compatibility of the Adam 1120011156 ATP Thermal Printer can vary. It is specifically designed for use with certain Adam Equipment balances and scales. Refer to the product documentation or contact Adam Equipment for information on compatibility with your specific model.

What type of printing technology does the ATP Thermal Printer use?

The Adam ATP Thermal Printer utilizes thermal printing technology. This technology eliminates the need for ink or toner, producing high-quality prints by applying heat to special thermal paper.

Can the ATP Thermal Printer print date and time information on documents?

Yes, the Adam 1120011156 ATP Thermal Printer typically has the capability to print date and time information on documents, enhancing the accuracy and relevance of printed records.

What is the printing speed of the ATP Thermal Printer?

The printing speed of the Adam ATP Thermal Printer can vary depending on the model and settings. Refer to the product specifications for details on the printing speed for your specific printer.

Is the ATP Thermal Printer easy to install and set up?

Yes, the Adam 1120011156 ATP Thermal Printer is designed to be user-friendly and easy to install. The setup process typically involves connecting the printer to a compatible Adam Equipment balance or scale and configuring settings as needed.

What is the maximum paper width supported by the ATP Thermal Printer?

The maximum paper width supported by the Adam ATP Thermal Printer can vary. Check the product specifications for details on the supported paper width for your specific model.

Can the ATP Thermal Printer print barcodes?

Yes, the Adam ATP Thermal Printer is often capable of printing barcodes. This functionality is useful for labeling and tracking items, especially in laboratory and industrial settings.

Does the ATP Thermal Printer support different print modes?

Yes, the Adam ATP Thermal Printer typically supports different print modes, allowing users to customize the printing format based on their specific documentation needs.

What types of documents can be printed with the ATP Thermal Printer?

The Adam 1120011156 ATP Thermal Printer is designed to print various documents, including weight and measurement data, labels, and other information generated by compatible Adam Equipment balances and scales.

Is the ATP Thermal Printer compatible with Windows and Mac operating systems?

The compatibility of the Adam ATP Thermal Printer with specific operating systems can vary. Check the product specifications or documentation for information on operating system compatibility.

Can the ATP Thermal Printer be used in legal-for-trade applications?

The certification status for legal-for-trade applications can vary. Some models of the Adam ATP Thermal Printer may be suitable for use in legal-for- trade scenarios. Check the product documentation or certification labels for details.

What is the life expectancy of the print head on the ATP Thermal Printer?

The life expectancy of the print head on the Adam ATP Thermal Printer can vary depending on usage and other factors. Refer to the product specifications or user manual for information on the print head's expected lifespan.

Does the ATP Thermal Printer come with a cutter for cutting printed labels?

The presence of a cutter for cutting printed labels can vary depending on the model or package. Check the product specifications or packaging details to determine if a cutter is included or available as an accessory.

What is the power source for the ATP Thermal Printer?

The power source for the Adam 1120011156 ATP Thermal Printer can vary. Some models may use an external power supply, while others may have a built-in power source. Check the product specifications for information on the power requirements.

Is the ATP Thermal Printer equipped with a user-friendly control panel?

Yes, the Adam ATP Thermal Printer typically features a user-friendly control panel that allows users to configure settings, initiate printing, and perform other functions with ease. Refer to the product specifications for details on the control panel interface.

DOWNLOAD THE PDF LINK:Adam 1120011156 ATP Thermal Printer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>