ADAM GRAVITY C5 Magnetic Wireless Charging Power Bank User Manual

ADAM GRAVITY C5 Magnetic Wireless Charging Power Bank

Specification!

*The product can only be used to charge smartphones / earbuds. Please refer to the user manual for instructions and more product information.

Product Introduction

Charging Introduction

• Charge 1 device with magnetic attachment

• Charge 2 devices simultaneously

• Place AirPods on the magnetic area.

• The light just turns on 8 seconds.

• The magnetic area can charge AirPods with a Mag Safe charging case.

Protective Function

• Multiple circuit protection
• Over-current protection
• Short-circuit protection
• Over-voltage protection
• Flame retardant protection
• Over-heat protection

LED Indicator Introduction

• Battery Level On Off Status indicator
  Power Level| 100%| 75%~so%| 50%~2s%| 25%~0%
  ---|---|---|---|---
  LED Indicator| | | |

• Power on
  Press power button once. The white light will turn on and show the battery Value, after 5 seconds turns off.

• Power off
  Press power button twice.
  The indicator turns off.

• Wireless charging
  Instantly charge upon contact and activate wireless charging output.

• USB-C Charging (output)
  The other white indicators will show the current battery value, the blue light turns off.

• Simultaneously Charging Wireless and USB-C
  The other white indicators will show the current battery value, the blue light stays on.

• FOD(Foreign Object Detection)
  Blue light flashes.

Attention

• Do not expose to liquids
• Do not shake while charging
• Unplug the device when fully charged
• Do not disassemble, puncture, drop, bend or modify
• For the fastest and safest charge, use an ADAM cable, your device’s original cable or a certified cable (such as MFi)
• Keep away from children
• Avoid extreme temperatures
• 1 year warranty
• Please scan the QR code on the packaging for the user manual

FCC Warning:

This device complies with Part 18 of the FCC Rules.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
( a ) Max. Electric Field Emissions: 5.21 V /m Max. Magnetic Field Emissions: 0.54V /m
( b ) The maintenance of the system is the responsibility of the manufacturer.
( c ) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement.
  The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>