IKEA GLITTRAN User Guide
- June 7, 2024
- Ikea
Table of Contents
IKEA GLITTRAN User Guide
Installation
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional. Switch off main shut-off valve before changing mixer tap.
Product Overview
-
140˚F 60˚C Max. 176˚F Max. 80˚C
-
14,5 – 72.5 psi 1 – 5 bar 7,2 – 145 psi 0,5 – 10 bar
Seal the open surfaces with silicone to prevent water from penetrating the worktop upon any leaks. Silicone is not included.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before Use
Before use: Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place. Ensure that it is tight to prevent removal by hand. Check at regular intervals to make sure that the installation is not leaking.