tecnoeka EKL 823 Proofer Oven Instruction Manual
- June 13, 2024
- tecnoeka
Table of Contents
tecnoeka EKL 823 Proofer Oven
Product Information
The product is a versatile electronic device designed to perform various functions. It is equipped with advanced features and offers a user-friendly interface. The product is manufactured by a reputable company and is known for its durability and reliability.
Key Features:
- Versatile functionality
- Advanced features
- User-friendly interface
- Durable and reliable
Product Usage Instructions
To use the product effectively, please follow the instructions below:
-
Power On:
- Locate the power button on the device.
- Press and hold the power button for a few seconds until the device turns on.
- Wait for the device to boot up completely.
-
Navigation:
- Use the navigation buttons or touch screen (if applicable) to navigate through the menu options.
- Select the desired function by highlighting it and pressing the “OK” button.
-
Function Selection:
- Browse through the available functions using the navigation buttons or touch screen.
- Highlight the function you want to use and press the “OK” button to select it.
-
Adjust Settings:
- Once you have selected a function, you may need to adjust the settings.
- Use the navigation buttons to move between different settings options.
- Press the “OK” button to enter a specific setting and make adjustments as required.
-
Perform Actions:
- Follow the on-screen prompts or refer to the user manual for specific actions related to your selected function.
- Use the designated buttons or touchscreen gestures to perform the required actions.
-
Power Off:
-
- To turn off the device, locate the power button.
- Press and hold the power button until a confirmation prompt appears on the screen.
- Select “Power Off” or a similar option to shut down the device. For detailed instructions on specific functions or troubleshooting, please refer to the official user manual provided with the product. You can also visit the manufacturer’s website at https://manual-hub.com/ for additional support and resources.
EC DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
Appendix II A to Directive 2006/42/EC
Manufacturer name| TECNOEKA Srl
Manufacturer address| Via Marco Polo, 11 –
35010 Borgoricco (PD) Italy
Name of person responsible for technical file|
Minotto Lorenzo
Address of person responsible for technical file| Via Marco
Polo, 11 – 35010 Borgoricco (PD) Italy
Type of product| Proofer
Purpose of product| Cooking food
Model| EKL 823 – EKL 864 – EKL 864 R –
EKL 1264 – KL 1264 R(-HT)
TECNOEKA Srl hereby declares that the above-mentioned products meet all the
relevant requirements of the following directives:
Low Voltage Directive 2006/95/EC
Electromagnetic compatibility directive 2004/108/EC.
TECNOEKA Srl hereby declares that the above-mentioned products meet the requirements of the following harmonized standards:
IEC EN 60335-1; IEC EN 60335-2-49
IEC EN 55014-1; IEC EN 61000-3-2; IEC EN 61000-3-3; IEC EN 62233
TECNOEKA Srl hereby declares that the above-mentioned products also meet the requirements of the following directives:
Machinery directive 2006/42/EC;
General Product Safety Directive 2001/95/EC;
Restriction of hazardous substances in electrical and electronic equipment (RoHS) directive 2002/95/EC;
Waste electrical and Electronic Equipment directive 2002/96/EC.
TECNOEKA Srl hereby declares that the above-mentioned products meet the requirements of EC Regulation 1907/2006
Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and guarantees better operation. Make sure that assistance is carried out solely and exclusively by qualified personnel. For any spare parts orders or for any information about the appliance, always mention the serial number and model (data indicated on the “technical data” plate at the rear).
General warnings
Very important!: keep this instruction book together with the appliance
for future consultation.
These warnings were drafted for your safety and for that of others. Please
read them carefully before installing or using the appliance:
- If, on receipt of the goods, the packaging is damaged, write the following on the delivery note: “l REVERSE THE RIGHT TO CONTROL THE GOODS” specify the damage and get the driver to sign in acceptance; send a claim in writing to the seller within 4 calendar days from the date of receipt. No claim shall be accepted after such period.
- The appliance is intended for professional use and must be utilised by qualified personnel trained to use it.
- Any modification which may be necessary on the electrical system to enable installation of the appliance, must be carried out solely by competent personnel.
- It is dangerous to modify or attempt to modify the characteristics of this appliance.
- Never clean the appliance with direct water jets, because, if any water enters, it could limit the machine’s safety .
- Before doing any maintenance or cleaning jobs, disconnect the appliance from the electrical mains and allow it to cool.
- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the nearest Service Centre and use only original spare parts.
N.B.: Improper or incorrect use and failure to observe the installation
instructions shall release the manufacture from all responsibility. In this
connection, the directives in the
” POSITIONING • paragraph must be strictly observed.
Technical specifications
Appliance model| EKL 823| EKL 864
EKL 864 R
| EKL 1264
EKL 1264 R(-HT)
---|---|---|---
Dimensions of appliance (mm) LxDxH| 680x500x850| 815x630x850| 935x905x800
Weight of appliance (Kg)| 26| 40| 58.8
Heating power (kW)| 1,2| 2,4| 2,4
Power supply voltage (V~)| 230 V~ (50/60 Hz)
Appliance class| I
Power cable diameter| 3×1,5 mm²
Type of cable| H07RN-F
Electric cable connection| Type Y
The “technical data” plate is positioned on the rear panel of the appliance.
Instructions for the installer
The following instructions are aimed at the qualified installer, to ensure that he carries out the installation, adjustment and maintenance operations as correctly as possible and according to current legal regulations. Any operation must be performed with an electrical power cut to the appliance. Before using the appliance, carefully remove the special adhesive film protecting the parts in stainless steel. Do not leave any glue residues on the surfaces. If necessary, remove them at once, with an appropriate solvent.
Positioning
Position the appliance perfectly horizontally (the feet are adjustable) at
a distance of not less than 10 cm from the side and rear walls, to enable
natural ventilating air to circulate freely around it. The appliance is not
suitable for embedding.
Electrical connection
The appliance must be connected to the electrical mains according to
current legal regulations. Before making the connection, make sure of the
following.
- the voltage and frequency values of the power supply system match the values on the “technical data ” plate affixed on the appliance;
- the limiting valve and the system are able to support the appliance’s load (see the “technical data” plate);
- the power supply system has an adequate earth connection according to current legal regulations;
- a single- pole switch with minimum between-contacts aperture of the overvoltage category Ill (4000 V), sized to the load and conforming to current legal regulations, is fitted between the appliance and the mains in the direct connection to the mains;
- the single-pole switch used for connection is easy to reach when the appliance is installed;
- the yellow/green earth wire is not interrupted by the switch;
- the power supply, when the appliance is operating, must not deviate from the rated voltage value by ±10%.
- if the supply cable is damaged then it must be replaced by the manufacturer or by your technical support or by a qualified person to avoid any risk.
Connection of power cable
The terminal board is on the rear panel of the appliance. Open the terminal
board cover by obtaining leverage with a screwdriver on the two side fins.
Loosen the cable gripper screw and allow the cable to pass through it. Arrange
the conductors so that the earth conductor is the last to detach from its
terminal if the cable goes into a state of faulty traction. Connect the phase
conductor to the terminal marked with the letter “L”, the neutral conductor to
the terminal marked with the letter “N” and the earth conductor to the
terminal marked with the symbol •æ. Tighten the ring nut of the cable gripper
and close the terminal board cover. The appliance must be connected to an
equipotential system whose efficiency must first be checked according to
current legal regulations. This connection must be made between different
appliances by using the appropriate terminal marked with the symbol The
equipotential conductor must have a minimum diameter of 2,5 mrn2 The
equipotential terminal is at the rear of the appliance.
Connection to water mains (mod. EKL 1264 — EKL 1264 R(-HT))
The appliance must be supplied with softened drinking water with a hardness
value of 0,50F to 30F (It is obligatory to use water softener to reduce the
formation of scaling inside the proofing chamber). The water pressure must be
in the range of 100 to 200 kPa (1 — bar). The connection to the water supply
is done using the 3/4″ threaded solenoid valve on the back (at the bottom) of
the appliance, fitting a mechanical filter with a cut-off cock (before
connecting the filter, allow a certain amount of water to flow out in order to
remove any waste from the pipe).
Use instructions
(for the user)
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge. Unless they have been given supervision or instruction concerning
use of appliances by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance. For the first
use, we advise you to run the appliance load-free for at least 15-20 minutes.
In this way, any unpleasant smells due to residual work grease are eliminated.
This appliance must be used solely for the purpose for which it was expressly
designed, i.e. heating and leavening frosted foods. Do not enter salt or salty
food in the proofing chamber. Salt can irreparably damage the appliance. The
manufacturer denies any responsibility for damages.
Residual risks
(for the user)
Keep away from the machine personnel not trained to use it. The appliance
contains electrical parts and must never be washed with a jet of water or
steam. The appliance is electrically connected: before attempting any cleaning
operation, cut power to the appliance. Do not use the door handle to move the
appliance (the glass panel may break).
How to use the control panel
Key to the symbols on the control panel:
ON/OFF” switch key
To electrically power up the appliance
Temperature knob
To vary the heating temperature for values from 30°C and 50°C.
Humidifier buttom (Modd. EKL 1264 – EKL 1264 R(-HT))
It allows humidity to enter the proofing chamber when it is already warmed.
Control thermostat indicator light
The indicator light of the control thermostat goes OFF whenever the
selected temperature is reached in the leavening compartment. It lights up
again when the thermostat is tripped to re-establish this temperature.
Routine cleaning and maintenance
( WARNING: Cut power to the appliance before every operation)
General cleaning
Clean the appliance when it is cool To clean the steel parts, do not use
products containing chlorine (sodium hypochlorite, hydrochloric acid, etc)
even if diluted. Use specific off-the-shelf products or a little hot vinegar.
Rinse thoroughly with water and dry with a soft cloth. Clean the glass door
with hot water only, and do not use rough clothes. Do not wash the appliance
with direct jets of water, because if water enters, this could limit the
appliance’s safety. Do not use corrosive substances (e.g. hydrochloric acid)
to clean the floor near to where the appliance could be located: the vapors
released by this acid could corrode and damage the appliance’s outer housing
in steel.
Technical assistance
- Before leaving the factory, the appliance was completely regulated and tested by expert specialized personnel to guarantee the best operating results.
- All repairs and settings must be performed with utmost care and attention, respecting national safety regulations in force. Always contact your retailer or our nearest Service Centre, giving details of the problem, the appliance model and the serial number (on the rating plate on the rear panel).
- For any maintenance, the user can contact Tecnoeka by calling the telephone numbers on the cover or going to www.tecnoeka.com.
Information to the consumers
Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip on the appliance means that at the end of its life, the product must be disposed of separately from the other rubbish. The user must hand the appliance to a specialized waste collection center for electric and electronic equipment. The separate collection of the rubbish and subsequent treatment, recovery and disposal help to produce other equipment using recycled materials, reducing the negative effects on the environment and public health, which would be caused by incorrect management of the rubbish. Should the user dispose of the product abusively, administrative sanctions would be applied.
WIRING LAYOUT
KEY
- M Power terminal board
- IL Power line switch
- T Control thermostat
- S Thermostat indicator light
- R1-R2 Heating elements
KEY
- M Power terminal board
- IL Power line switch
- T Control thermostat
- S Thermostat indicator light
- R1-R2 Heating elements
KEY
- M Power terminal board
- IL Power line switch
- T Control thermostat
- E Humidifier solenoid-valve
- S Thermostat indicator light
- R1-R2 Heating elements
- I Humidifier switch
THE WARRANTY
Your appliance is covered by warranty. The seller will replace or repair (and his decision will be final), free of charge for the customer, only those parts that are defective due to a manufacturing fault on condition that, under penalty of forfeiture:
- for domestic equipment, the customer notifies the fault within two months from the date when he/she discovered it and within 2 years from the date of purchase;
- for professional equipment, the customer notifies the fault within 8 days from the date when he/she discovered it and within 12 months from the date of purchase, by registered letter with acknowledgment of receipt and enclosing the invoice or receipt proving the purchase.
- Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or when the above-mentioned terms are not complied with, the warranty is expressly excluded in the following cases:
- faults or breakage caused by the transport;
- wrong or incorrect installation of the product (for instance because of insufficient draught of the flue or exhausts) in light of the instructions given in the user’s handbook supplied with the product;
- inadequate or abnormal electrical, hydraulic and/or gas supplies;
- carelessness, negligence or incompetence in using the product in light of the instructions given in the user’s handbook supplied with the product;
- use of the product for uses different from the one for which it was built or any way in a manner not compliant with the instructions given in the user’s handbook supplied with the product;
- tampering with the product;
- adjustments and/or maintenance and/or repairs carried out by unauthorized personnel and/or with nonoriginal spare parts;
- inadequate or careless maintenance of the product in contrast with the user’s handbook supplied with the product;
- damages caused by fire, natural disasters and accidents as well as by any cause not attributable to TECNOEKA SRL.
The warranty explicitly excludes varnished or enameled parts, knobs, handles, movable or removable plastic parts, bulbs, glass parts, refractories and any accessories. TECNOEKA SRL cannot be held responsible for any damages, either direct or indirect, caused by the product breaking down or following its non-use. Any repairs carried out during the warranty do not cause said warranty to be extended or renewed. Nobody is authorized to modify the terms and conditions of the warranty or to issue new verbal or written warranties.
The warranty is valid only for appliances installed in the European
Union.
Any dispute shall be settled by the competent Court in Padua.
Warning for the Buyer:
- the cooking appliance is designed only for cooking purposes while the heating appliance is designed only for heating domestic environments;
- TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any installation carried out;
- TECNOEKA S.r.l. cannot be held responsible for any damages, either direct or indirect, to people, pets or property caused by the appliance breaking down or following its non-use.
The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in copying in this handbook. The Manufacturer reserves the right to modify the products as he deems fit, also in the interest of the user, without affecting the vital characteristics of functionality and safety.