EVOLVEO Sonix Pro Wireless PIR Motion Sensor User Manual
- June 14, 2024
- Evolveo
Table of Contents
EVOLVEO Sonix Pro Wireless PIR Motion Sensor
Thanks for choosing us, please carefully read this user manual before use
- Please avoide extreme dry or humid environment in case of device damage.
- Only qualified staff for repair, do not dismantle the device by yourself
- Please read this User Manual before connecting ether devices and do not connect incompatible ones.
- Please back up all important dala. We are not responssible for dala missing due to inappropriate operation.
Product Introduction
This product is a Wireless PIR Motion Sensor(hereby short name as sensor), it
is able to detect infrared ray from human body, and make accurate analysis
according to the environment, precisely and stablely alarm to the motion of
human body. This product can both work along and work together with our Alarm
Host.
Suitable Place
Features
- MCU+IR IC technology, much more stable
- Anti-tamper and Low-power alert function
- Dynamic threshold auto-adjustment, smart and intelligent
Details
LED Status Introduction
Tips
Beller install on the solid object like wall, where people pass by, and with 1.7-2.2m height to ground
Install the sensor and adjust the angle
Cautions
-
Below tips are helpful to eliminate external effect on its detection function
-
Avoid extremely hot/cold object
-
Avoid strong sunshine
lnstallalion with angle
-
Avoid swing object like curtain
-
Suggestion : Install it to places where intruder may break
Note: The detection area is ?m/110° sector.
Test
Please test by yourself after installation to make sure it covers all areas you want to protect.
Coding
Make the alarm host into coding status, trigger the sensor and the sensor will send signal to alarm host (Indicator flashes in red color), alarm host receives signal and coding successfully.
Parameters
| Power suoolv | 2 PCS of AAA Batterv |
|---|---|
| Standbv current | S15uA |
| Max working current | S15mA |
| IR sensor | Heat detection IR Sensor |
| Detection ranae | 7M (110° 1 |
| Wireless frequency | 433MHz, 70M (in the open area) |
Working temperature
and humidity
| -10°-+50°, 5%-95%RH
(No frozen)
Product Size| 97x55x42mm (excluding bracket)
Packing List
- Detector
- Bracket
- Screw (2x)
- User manual
Disposal
The crossed container symbol on the product, in literature or on the packaging
means that in the EU all electric and electronic devices, batteries and
accumulators must be disposed of in sorted waste at the end of their working
life. These products must not be disposed of as unsorted municipal waste
CD C E: Declaration of Conformity Abacus Electric, s.r.o. declares that
EVOLVEO Sonix PRO Wireless PIR motion sensor is in compliance with the
requirements of the standards and regulations applicable to this type of
device. The full text of the Declaration of Conformity can be found at
https://ftp.evolveo.com/CE/ Copyright© Abacus
Electric, s.r.o., www.evolveo.com
www.facebook.com/EvolveoCZ
Abacus Electric, s.r.o. Plana 2, 370 01, The Czech Republic
Made in China All rights reserved.
The design and specifications are subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>