WonVon PND-Q5S Portable Car Smart Screen User Manual

WonVon PND-Q5S Portable Car Smart Screen User Manual

Main interface

1. CarPlay
2. Android Auto
3. HiCar
4. Settings
5. Time

Settings

Click Enter
You can set the adjustment in this interface

1. Support multi-language settings
   You can set the relevant language according to your own habits
   

2. Date and time settings
   

3. Time zone setting
   

Connection settings

• BT connection settings
  
  

• Screen display brightness
  

• Background replacement
  
  

• 3.A variety of different models boot
  
  

• 4 CarPlay Settings
  1You can set the display on the right side of carplay
  2Versions below I0S14.0 need to enable this function
  

• 1. Here you can adjust the volume of media, phone, and navigation respectively
  
  

• 1.Dual bluetooth connection
  1 After turning on this function, the mobile phone needs to be connected to the product to connect to the earphone or the car to make a sound
  

• 1.FM emission
  When this function is turned on, the machine will restart, it is a normal phenomenon Please do not worry
  

• 1.Swipe down on the status bar in the middle of the screen.
  
  

Two-wire connection

Phone

PND-Q5S

EarPhone

• You can use your mobile phone to connect PND-Q5S and earphones.
• The sound is played through the earphones.
• Makes you safer during driving

CarPlay

Bluetooth boot connection to wifi is unsuccessful, you need to manually connect to wifi The wifi name is the same as the bluetooth name, and the password is: 12345678

Select on machine Turn on the wifi of the mobile phone, turn on the Bluetooth of the mobile phone, find the Bluetooth name of the machine, click pairing, and automatically jump to CarPlay if the pairing is successful.

You can make calls after connecting to carplay

Android Auto

Bluetooth boot connection to wifi is unsuccessful, you need to manually connect to wifi The wifi name is the same as the bluetooth name, and the password is: 12345678

Select on machine   Turn on the wifi of the mobile phone, turn on the Bluetooth of the mobile phone, find the Bluetooth name of the machine, click pairing, and automatically jump to AndroidAuto if the pairing is successful

You can make calls after connecting to Android Auto

Hicar

Bluetooth boot connection to wifi is unsuccessful, you need to manually connect to wifi The wifi name is the same as the bluetooth name, and the password is: 12345678

Select on machine Turn on the wifi of the mobile phone, turn on the Bluetooth of the mobile phone, find the Bluetooth name of the machine, click pairing, and automatically jump to Hicar if the pairing is successful.

You can make calls after connecting to Hicar

Machine display

Size: 13691.528mm

1. AUX
2. TF Card
3. Type-C

Parameter

CPU: LINUX processor
Screen size: 5 inches HD
Resolution: 800*480IPS viewing angle Full lamination process
Screen Color: 65k
Screen brightness: 1000 nits
Touch: high precision capacitive touch
Interface: TF card/3.5cAUX audio
Working power supply: 5V waterproof power adapter
Working power range: 5v
Working current: maximum 2A
Frequency transmission: 87.5-108MHz
Speaker: Built-in 3W speaker
CarPlay: Support wireless/wired CarPlay (Note: iPhone 6 and above, IOS10 and above should be supported.)
Android Auto: Support wireless/wired Android Auto /hicar
(Note: The wireless Android automatic function requires an Android phone with Android 11 and above, and Android 11
and below can only use wired Android Auto. Contains Huawei phones.)
Information/Navigation/Music Control
Built-in high-sensitivity antenna, more sensitive response.
Mechanical properties:
Operating temperature : -20°C to 70°C
IPX7 Waterproof : Yes

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>