APC APCRBC141 UPS Replacement Battery Cartridge Installation Guide

APC APCRBC141 UPS Replacement Battery Cartridge

Description

High-quality and dependable, the APC APCRBC141 UPS Replacement Battery Cartridge is intended to prolong the life of certain APC UPS systems and improve their performance. This authentic APC replacement battery is essential to preserving the effectiveness and integrity of your UPS and guaranteeing continuous protection for your vital power requirements. The APCRBC141 is designed to precisely match the requirements of APC UPS units that are compatible with it, allowing for seamless integration and guaranteeing dependable, safe operation.

Users may minimize downtime by easily replacing their outdated UPS batteries without the need for expert assistance thanks to the simple installation technique. Because of its sturdy design, the battery has a long service life and provides reliable power backup, bringing peace of mind. The APC APCRBC141, which is perfect for both home and business use, is essential for protecting your equipment against power fluctuations and interruptions.

Safety Messages

Read the instructions carefully to become familiar with the equipment before trying to install, operate, service or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

• Danger: The addition of this symbol to a Danger or Warning safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
• Warning: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
• CAUTION indicates a potentially hazardous situation that, if not avoided, can result in minor or moderate injury.
• CAUTION addresses practices not related to physical injury including certain environmental hazards, potential damage or loss of data.

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.

• Adhere to all local and national electrical codes.
• Always recycle used batteries. For information on recycling used battery modules, refer to the Battery Disposal Information sheet included with the replacement battery module.
• Recycle the package materials or save them for reuse.

Battery Safety

• Before installing or replacing the batteries, remove jewellery such as wristwatches and rings. High short circuit current through conductive materials could cause severe burns.
• Do not dispose of batteries by burning them. The batteries may explode.
• Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes, and may be toxic.

Replace Battery Modules

DAMAGE TO EQUIPMENT OR PERSONNEL

• The equipment is heavy. Each APCRBC152 battery module weighs 15.3 kg (33.7 lb) and each APCRBC141 battery module weighs 11.7 kg (25.8 lb).

• Always practice safe lifting techniques adequate for the weight of the equipment.

• Adhere to all local and national electrical codes.

• Use the battery model handle to slide the battery modules in and out of the UPS and external battery pack (XLBP).

• Do not use the handle to lift or carry the battery module.

• When replacing the battery modules, replace them with the same type of battery modules.
  Failure to follow these instructions can result in equipment damage and minor or moderate injury.

• Note: The batteries will charge to 90% capacity in the first three hours of operation on utility power. Do not expect full runtime capability during this initial charge period.

External Battery Packs

Reset Battery Installation Date

The battery installation date will appear on the display interface within two minutes of battery installation. If the installation date does not appear on the display interface, use the UP/DOWN arrow buttons to navigate to the Config Menu > Battery and enter the correct Installation Date. When the replacement battery cartridge (RBC), is charged to full capacity, perform a Self Test and a Runtime Calibration Test.

Customer support and warranty information are available on the APC website, www.apc.com.
© 2014 APC by Schneider Electric. APC, the APC logo, and Smart-UPS are owned by Schneider Electric Industries S.A.S. or their affiliated companies. All other trademarks are property of their respective owners.

FAQs

What is the APC APCRBC141?

It's a replacement battery cartridge for specific APC UPS models.

Which UPS models are compatible with the APCRBC141?

The cartridge is compatible with selected APC UPS units; refer to the compatibility list for details.

What type of battery is used in the APCRBC141?

It uses a Lead-Acid battery.

Is the battery user-replaceable?

Yes, it's designed for easy user replacement.

What is the expected lifespan of this battery cartridge?

The lifespan varies based on usage, but it's designed for extended use.

Does it come with a warranty?

The APC APCRBC141 Battery Typically comes with a warranty of 2 years from the date of purchase.

Are there any environmental considerations with this battery?

Yes, it's a Green Premium product and contains a warning for Californian users about chemical exposure.

Is the APCRBC141 RoHS compliant?

Yes, it's pro-actively compliant with EU RoHS directives.

What are the physical dimensions of the battery cartridge?

The dimensions are 2.99 in x 8.27 in x 15.75 in.

Can this battery cartridge be recycled?

Yes, it comes with a battery recycling guide for environmentally responsible disposal.

What are the storage conditions for the APCRBC141?

It should be stored in a cool, dry place away from direct sunlight.

Is there a take-back program available for the cartridge?

Yes, a take-back program is available for this product.

References PDF:APC APCRBC141 UPS Replacement Battery Cartridge – Device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>