BOSCH HBS534B.0B Built in Oven User Manual
- June 12, 2024
- Bosch
Table of Contents
HBS534B.0B Built in Oven
Product Information
Product: Oven
Model: HBS534B.0B
Language: English
User Manual and Installation Instructions
Safety, further information, and explanations are available
online.
Safety
1.4 Safe use
-
Always place accessories in the cooking compartment the right
way round. -
Risk of fire! Combustible objects that are left in the cooking
compartment may catch fire. Never store combustible objects in the
cooking compartment. If smoke is emitted, the appliance must be
switched off or the plug must be pulled out and the door must be
held closed in order to stifle any flames. -
Loose food remnants, fat, and meat juices may catch fire.
Before using the appliance, remove the worst of the food residues
and remnants from the cooking compartment, heating elements, and
accessories. -
Opening the appliance door creates a draught. Greaseproof paper
may come into contact with the heating element and catch fire.
Never place greaseproof paper loosely over accessories when
preheating the appliance and while cooking. Always cut greaseproof
paper to size and use a plate or baking tin to hold it down. -
Risk of burns! The appliance and its parts that can be touched
become hot during use. Caution should be exercised here in order to
avoid touching heating elements. -
Young children under 8 years of age must be kept away from the
appliance. Accessories and cookware get very hot. Always use oven
gloves to remove accessories or cookware from the cooking
compartment. -
When the cooking compartment is hot, any alcoholic vapors
inside may catch fire. The appliance door may spring open. Hot
steam and jets of flame may escape. Only use small quantities of
drinks with a high alcohol content in food. Do not heat spirits
(15% vol.) when undiluted (e.g. for marinating or pouring over
food). Open the appliance door carefully. -
Risk of scalding! The accessible parts of the appliance become
hot during operation. Never touch these hot parts. Keep children at
a safe distance. Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the temperature. Open
the appliance door carefully. Keep children at a safe
distance. -
If there is water in the cooking compartment when it is hot,
this may create hot steam. Never pour water into the cooking
compartment when the cooking compartment is hot. -
Risk of injury! Scratched glass in the appliance door may
develop into a crack. Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the oven door, as they
may scratch the surface. -
The appliance and its parts that can be touched may have sharp
edges. Take care when handling and cleaning them. If possible, wear
protective gloves. -
The hinges on the appliance door move when the door is opened
and closed, which could trap your fingers. Keep your hands away
from the hinges. -
Components inside the appliance door may have sharp edges. Wear
protective gloves.
Installation Instructions
General installation instructions are available in the user
manual.
boMsgecywRnthBefeeo-rwhegslcecoidsohbmetmevneeinocree.wecfyiooaotnsnum:dr /
Oven
HBS534B.0B
[en]
User manual and installation instructions
enSafety
Futher information and explanations are available online:
Table of contents
INFORMATION FOR USE 1 Safety …………………………………………………………. 2 2 Preventing material
damage ………………………… 4 3 Environmental protection and saving en-
ergy ……………………………………………………………. 5 4 Familiarising yourself with your appliance
……. 5 5 Accessories………………………………………………… 7 6 Before using for the first time
………………………. 9 7 Basic operation …………………………………………… 9 8 Rapid heating
……………………………………………. 10 9 Time-setting options………………………………….. 10 10 Childproof
lock………………………………………….. 12 11 Cleaning and servicing ………………………………. 12 12
Cleaning assistance…………………………………… 14 13 Shelf supports…………………………………………… 14 14
Appliance door………………………………………….. 15 15 Troubleshooting………………………………………… 18 16
Disposal……………………………………………………. 19 17 Customer Service………………………………………. 19 18 How
it works……………………………………………… 20
19 INSTALLATION INSTRUCTIONS …………………. 23 19.1 General installation
instructions…………………. 24
1Safety
Observe the following safety instructions. 1.1General information ¡ Read this
instruction manual carefully. ¡ Keep the instruction manual and the
product information safe for future reference or for the next owner. ¡ Do not
connect the appliance if it has been damaged in transit.
2
1.2Intended use This appliance is designed only to be built into kitchen
units. Read the special installation instructions. Only a licensed
professional may connect appliances without plugs. Damage caused by incorrect
connection is not covered under the warranty. Only use this appliance: ¡ To
prepare meals and drinks. ¡ in private households and in enclosed
spaces in a domestic environment. ¡ up to an altitude of max. 4000 m above
sea level. Do not use the appliance: ¡ with an external timer or a remote
control.
1.3Restriction on user group This appliance may be used by children aged 8 or
over and by people who have reduced physical, sensory or mental abilities or
inadequate experience and/or knowledge, provided that they are supervised or
have been instructed on how to use the appliance safely and have understood
the resulting dangers. Do not let children play with the appliance. Children
must not perform cleaning or user maintenance unless they are at least 15
years old and are being supervised. Keep children under the age of 8 years
away from the appliance and power cable.
1.4Safe use Always place accessories in the cooking compartment the right way
round. “Accessories”, Page 7
WARNING Risk of fire! Combustible objects that are left in the cooking
compartment may catch fire. Never store combustible objects in the
cooking compartment. If smoke is emitted, the appliance must be
switched off or the plug must be pulled out and the door must be held closed
in order to stifle any flames.
Loose food remnants, fat and meat juices may catch fire. Before using the
appliance, remove the
worst of the food residues and remnants from the cooking compartment, heating
elements and accessories. Opening the appliance door creates a draught.
Greaseproof paper may come into contact with the heating element and catch
fire. Never place greaseproof paper loosely over accessories when preheating
the appliance and while cooking. Always cut greaseproof paper to size and use
a plate or baking tin to hold it down.
WARNING Risk of burns! The appliance and its parts that can be touched become
hot during use. Caution should be exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Accessories and cookware get very hot. Always
use oven gloves to remove ac-
cessories or cookware from the cooking compartment. When the cooking
compartment is hot, any alcoholic vapours inside may catch fire. The appliance
door may spring open. Hot steam and jets of flame may escape. Only use small
quantities of drinks with a high alcohol content in food. Do not heat spirits
( 15% vol.) when undiluted (e.g. for marinating or pouring over food). Open
the appliance door carefully.
WARNING Risk of scalding! The accessible parts of the appliance become hot
during operation. Never touch these hot parts. Keep children at a safe
distance. Hot steam may escape when you open the appliance door. Steam may not
be visible, depending on the temperature. Open the appliance door carefully.
Keep children at a safe distance. If there is water in the cooking compartment
when it is hot, this may create hot steam. Never pour water into the cooking
compart-
ment when the cooking compartment is hot.
Safetyen
WARNING Risk of injury! Scratched glass in the appliance door may develop into
a crack. Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass on the oven door, as they may
scratch the surface. The appliance and its parts that can be touched may have
sharp edges. Take care when handling and cleaning them. If possible, wear
protective gloves. The hinges on the appliance door move when the door is
opened and closed, which could trap your fingers. Keep your hands away from
the hinges. Components inside the appliance door may have sharp edges. Wear
protective gloves.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when
repair-
ing the appliance. If the power cord of this appliance is dam-
aged, it must be replaced by trained specialist staff. If the insulation of
the power cord is damaged, this is dangerous. Never let the power cord come
into contact with hot appliance parts or heat sources. Never let the power
cord come into contact with sharp points or edges. Never kink, crush or modify
the power cord. An ingress of moisture can cause an electric shock. Do not use
steam- or high-pressure cleaners to clean the appliance. If the appliance or
the power cord is damaged, this is dangerous. Never operate a damaged
appliance. Never pull on the power cord to unplug the appliance. Always unplug
the appliance at the mains. If the appliance or the power cord is damaged,
immediately unplug the power cord or switch off the fuse in the fuse box. Call
customer services. Page 19
3
enPreventing material damage
WARNING Risk of suffocation! Children may put packaging material over their
heads or wrap themselves up in it and suffocate. Keep packaging material away
from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to
suffocate. Keep small parts away from children. Do not let children play with
small parts.
1.5Halogen bulb
WARNING Risk of burns! The bulbs in the cooking compartment get very hot.
There is still a risk of burning for some time after they have been switched
off. Do not touch the glass cover. Avoid contact with your skin when cleaning.
WARNING Risk of electric shock! When changing the bulb, the bulb socket
contacts are live. Before replacing the bulb, ensure that the
appliance is switched off in order to prevent a potential electric shock. Also
unplug the appliance from the mains or switch off the circuit breaker in the
fuse box.
2 Preventing material damage
2.1General
ATTENTION! Alcoholic vapours may catch fire in the hot cooking compartment and
cause permanent damage to the appliance. The appliance door may spring open
due to an explosion and it may fall off. The door panels may shatter and
fragment. Due to the resulting negative pressure, the cooking compartment may
become considerably deformed inwards. Do not heat spirits ( 15% vol.) when
undiluted (e.g.
for marinating or pouring over food). If there is water on the cooking
compartment floor when operating the appliance at temperatures above 120 °C,
this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. Objects on the cooking compartment floor at over 50 °C
will cause heat to build up. The baking and roasting times will no longer be
correct and the enamel will be damaged. Do not place any accessories,
greaseproof paper or
foil of any kind on the cooking compartment floor. Only place cookware on the
cooking compartment
floor if a temperature under 50 °C has been set. When the cooking compartment
is hot, any water inside it will create steam. The change in temperature may
cause damage. Never pour water into the cooking compartment
when it is still hot. Never place cookware containing water on the
cooking compartment floor. The prolonged presence of moisture in the cooking
compartment leads to corrosion. Allow the cooking compartment to dry after
use. Do not keep moist food in the cooking compartment
for a long time with the door closed. Do not store food in the cooking
compartment.
Leaving the appliance to cool down with the door open will damage the front of
neighbouring kitchen units over time. Always allow the cooking compartment to
cool
down with the door closed after cooking at high temperatures. Take care not to
trap anything in the appliance door. Only leave the cooking compartment to dry
with the door open if a lot of moisture was produced during operation. Fruit
juice dripping from the baking tray leaves stains that cannot be removed. When
baking very juicy fruit flans, do not pack too much on the baking tray. If
possible, use the deeper universal pan. Using oven cleaner in a hot cooking
compartment damages the enamel. Never use oven cleaner in the cooking
compartment when it is still warm. Remove all food remnants from the cooking
compartment and the appliance door before you next heat up the appliance. If
the seal is very dirty, the appliance door will no longer close properly
during operation. This may damage the front of adjacent kitchen units. Keep
the seal clean at all times. Never operate the appliance if the seal is
damaged or missing. Sitting or placing objects on the appliance door may
damage it. Do not place, hang or support objects on the appliance door. Do not
place cookware or accessories on the appliance door. With certain models,
accessories may scratch the door pane when closing the appliance door. Always
push accessories fully into the cooking compartment.
4
Environmental protection and saving energyen
3 Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less power. Only
preheat the appliance if the recipe or the recommended settings tell you to do
so. ¡ Not preheating the appliance can reduce the en-
ergy used by up to 20%. Use dark-coloured, black-coated or enamelled baking
tins. ¡ These types of baking tin absorb the heat particu-
larly well. Open the appliance door as little as possible during operation. ¡
This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance to reheat.
When baking multiple dishes, do so in succession or in parallel. ¡ The cooking
compartment is heated after baking
the first dish. This reduces the baking time for the second cake. If the
cooking time is relatively long, you can switch the appliance off 10 minutes
before the cooking time ends. ¡ There will be enough residual heat to finish
cooking the dish. Remove any accessories that are not being used from the
cooking compartment. ¡ Accessories that are not being used do not need to be
heated. Allow frozen food to defrost before cooking. ¡ This saves the energy
that would otherwise be required to defrost it. Note: The appliance requires:
¡ a maximum of 1 W when the appliance is in operation with the display
switched on ¡ a maximum of 0.5 W when the appliance is in operation with the
display switched off
4 Familiarising yourself with your appliance
4.1Controls
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status. Note: On certain models,
specific details such as colour and shape may differ from those pictured.
2
3
1
1
Buttons and display The buttons are touch-sensitive surfaces. To se-
lect a function, simply press lightly on the relev-
ant field.
The display shows symbols for active functions
and the time-setting options.
“Buttons and display”, Page 6
2
Function selector Use the function selector to set the types of
heating and other functions.
You can turn the function selector clockwise or
anti-clockwise from the zero setting .
Depending on the appliance, the function se-
lector can be pushed in. Press on the function
selector to click it into or out of the zero set-
ting .
“Types of heating and functions”, Page 6
3
Temperature selector Use the temperature selector to set the temper-
ature for the type of heating and select settings
for other functions.
You can only turn the temperature selector
clockwise from the zero setting until it offers
resistance. You cannot turn it any further than
this.
Depending on the appliance, the temperature
selector can be pushed in. Press on the tem-
perature selector to click it into or out of the
zero setting .
“Temperature and setting levels”, Page 7
5
enFamiliarising yourself with your appliance
4.2Buttons and display
You can use the buttons to set various functions for your appliance. The
display shows the settings.
Symbol
Function Time-setting options
Minus Plus Childproof lock
Use Select the timer , cooking time , end time and time. To select the individual time-setting options, press the button several times. Decrease the setting values. Increase the setting values. Activate or deactivate the childproof lock.
4.3Types of heating and functions
To ensure that you always use the right type of heating to cook your food, we
have explained the differences and applications below.
Symbol
Type of heating 3D hot air Gentle hot air
Pizza setting Bottom heating Full-surface grill Hot air grilling Top/bottom
heating
What it’s used for/how it works Bake and roast on one or more levels. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. Cook selected dishes gently on one level without preheating. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. The food is cooked in phases using residual heat. Select a temperature of between 120 °C and 230 °C. Always keep the appliance door closed when cooking. This type of heating is used to determine the energy consumption in air recirculation mode and the energy efficiency class. Cook pizza or dishes that require a lot of heat from below. The bottom heating element and the ring- shaped heating element in the back wall heat the cooking compartment. Final baking or cooking food in a bain marie. Heat is emitted from below. Grill flat items such as steak and sausages, or make toast. Gratinate food. The entire area underneath the grill element becomes hot. Roast poultry, whole fish and larger pieces of meat. The grill element and the fan switch on and off alternately. The fan circulates the hot air around the food. Traditionally bake or roast on one level. This type of heating is ideal for cakes with moist toppings. The heat is emitted evenly from above and below. This type of heating is used to measure the energy consumption in the conventional mode.
Other functions This is where you can find an overview of other functions of your appliance.
Symbol
Function Rapid heating
Oven light
Use Rapidly preheat the cooking compartment without accessories. “Rapid heating”, Page 10 Illuminate the cooking compartment without heating. “Lighting”, Page 7
6
Accessoriesen
4.4Temperature and setting levels
There are different settings for the types of heating and functions. Note: For
temperature settings above 250 °C, the appliance reduces the temperature to
approx. 240 °C after approx. 10 minutes. If your appliance has the top/bottom
heating or bottom heating types, this temperature reduction does not take
place there.
Symbol
50275 1, 2, 3 or I, II, III
Function Zero setting Temperature range Grill settings
Use The appliance is not heating up. Set the temperature in the cooking compartment in °C. Set the grill settings for Full-surface grill and Grill, small area (depending on the appliance model). 1 = low 2 = medium 3 = high
Heat-up indicator The appliance indicates when it is heating up. When the
appliance is heating, the symbol lights up on the display. This symbol goes
out when heating is paused. When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is when the symbol first
goes out. Note: Due to thermal inertia, the temperature displayed may differ
slightly from the actual temperature inside the cooking compartment.
4.5Cooking compartment
The functions in the cooking compartment make your appliance easier to use.
Shelf supports The shelf supports in the cooking compartment enable you to
place accessories at different heights. “Accessories”, Page 7 Your appliance
has five shelf positions. The shelf positions are numbered from bottom to top.
You can remove the shelf supports, e. g. for cleaning. “Shelf supports”, Page
14
Self-cleaning surfaces The back wall in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a porous, matt ceramic
layer and have a rough surface. When the appliance is in operation, the self-
cleaning surfaces absorb splashes from roasting or grilling and break them
down. If the self-cleaning surfaces no longer clean themselves adequately
during operation, heat up the cooking compartment specifically to the right
temperature. “Cleaning self-cleaning surfaces in the cooking compartment”,
Page 13
Lighting The oven lamp lights up the cooking compartment. With most types of
heating and functions, the lighting lights up during operation. When the
function selector is turned to bring operation to an end, the lighting goes
out. The Oven light setting on the function selector can be used to switch on
the light without heating. Note: The cooling fan also runs at position Oven
light.
Cooling fan The cooling fan switches on automatically during operation. The
hot air escapes above the door. ATTENTION! Do not cover the ventilation slot
above the appliance door. The appliance overheats. Ensure that the ventilation
slots are unobstructed. To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a certain period
afterwards.
Appliance door If you open the appliance door during operation, the operation
continues.
5 Accessories
Use original accessories. These have been made especially for your appliance.
Note: Accessories may become deformed if they get hot. Deformation has no
effect on function. As the accessory cools down, it will regain its original
shape.
The accessories supplied may differ depending on the appliance model.
7
enAccessories Accessories Wire rack
Universal pan
Narrow universal pans
5.1Locking function
The locking function prevents the accessories from tilting when they are
pulled out. You can pull out the accessories approximately halfway without
them tipping. The accessories must be inserted into the cooking compartment
correctly for the tilt protection to work properly.
5.2Sliding accessories into the cooking compartment
Always slide accessories into the cooking compartment correctly. This is the
only way to ensure that accessories can be pulled out approximately halfway
without tipping. 1. Turn the accessories so that the notch is at the
rear and is facing downwards. 2. Insert accessories between the two guide rods
for
the shelf position.
Use ¡ Cake tins ¡ Ovenproof dishes ¡ Cookware ¡ Meat, e.g. roasting joints or
steak ¡ Frozen meals ¡ Moist cakes ¡ Baked items ¡ Bread ¡ Large roasts ¡
Frozen meals ¡ Catching dripping liquids, e.g. fat when
grilling food on the wire rack. ¡ Moist cakes ¡ Baked items ¡ Frozen meals
Slide the narrow universal pans into the cooking compartment individually or
at the same time as shown in the image. Do not place them on the wire rack. Do
not place the narrow universal pans on the clip-on pull-out rails.
Wire rack
Insert the wire rack with the open side facing the appliance door and the curved lip facing downwards.
Baking tray Slide the tray, e.g. the universal pan, E.g. univer- in with the sloping edge facing the sal pan or appliance door. baking tray
Narrow uni- On the narrow universal pans, the versal pans notch is in the
middle.
Insert the narrow universal pans with the handle facing the appliance door.
3. Push the accessory all the way in, making sure that it does not touch the
appliance door.
8
Note: Take any accessories that you will not be using out of the cooking
compartment while the appliance is in operation.
Combining accessories You can combine the wire rack with the universal pan to
catch any liquid that drips down. 1. Place the wire rack on the universal pan
so that
both spacers are on the rear edge of the universal pan. 2. Insert the
universal pan between the two guide rods for a shelf position. In so doing,
the wire rack is on top of the upper guide rod.
Wire rack on universal pan
Before using for the first timeen
5.3Other accessories
You can purchase other accessories from our aftersales service, specialist
retailers or online. You will find a comprehensive range of products for your
appliance in our brochures and online: www.bosch-home.com Accessories vary
from one appliance to another. When purchasing accessories, always quote the
exact product number (E no.) of your appliance. You can find out which
accessories are available for your appliance in our online shop or from our
aftersales service.
6 Before using for the first time
Configure the settings for initial start-up. Clean the appliance and
accessories.
6.1Initial use
You need to make settings for initial use before you can use your appliance.
Setting the time on the clock Once the appliance has been connected to the
mains or following a power failure, the time flashes on the display. The time
starts at “12:00”. Set the current time. Requirement: The function selector
must be set to the “Off” position . 1. Use the or button to set the time. 2.
Press the button. a The time that is set appears on the display.
6.2Cleaning the appliance before using it for the first time
Clean the cooking compartment and accessories before using the appliance to
prepare food for the first time. 1. Remove any accessories and leftover
packaging,
such as polystyrene pellets, from the cooking compartment.
2. Before heating the appliance, wipe the smooth surfaces in the cooking
compartment with a soft, damp cloth.
3. Keep the room ventilated while the appliance is heating.
4. Set the type of heating and temperature. “Basic operation”, Page 9
Type of heat- 3D hot air ing Temperature Maximum Cooking time 1 hour 5. Switch
off the appliance after the specified cooking time. 6. Wait until the cooking
compartment has cooled down. 7. Clean the smooth surfaces with soapy water and
a dish cloth. 8. Clean the accessories using soapy water and a dish cloth or
soft brush.
7 Basic operation
7.1Switching on the appliance
Turn the function selector to any position other than the “Off” position .
a The appliance is switched on.
7.2Switching off the appliance
Turn the function selector to the “Off” position . a The appliance is switched
off.
9
enRapid heating
7.3Setting the type of heating and temperature
1. Use the function selector to set the type of heating. 2. Use the
temperature selector to set the temperature
or grill setting. a The appliance starts heating after a few seconds. 3. When
your food is ready, switch off the appliance. Tip: The most suitable type of
heating for your food can be found in the description of the type of heating.
“Types of heating and functions”, Page 6
8 Rapid heating
To save time, you can use rapid heating to shorten the preheat time. Only use
rapid heat-up when a temperature of over 100 °C has been set. After rapid
heating, it is best to use the following types of heating: ¡ 3D hot air ¡
Top/bottom heating
9 Time-setting options
Your appliance has different time-setting options, with which you can control
its operation.
9.1Overview of the time-setting options
With the button, select the different time-setting options.
Time-setting option Timer Cooking time End time
Time
Use
The timer can be set independently of the appliance when it is in operation.
It does not affect the appliance. If you set a cooking time, operation of the
appliance stops automatically once this time has elapsed. For the cooking
time, you can set the time at which operation ends. The appliance starts up
automatically so that it finishes cooking at the required time. You can set
the time.
9.2Setting the timer
The timer runs independently of the appliance when it is in operation. The
timer can be set when the appliance is switched on or off, up to 23 hours and
59
Changing the type of heating You can change the type of heating at any time.
Use the function selector to set the required type of
heating.
Changing the temperature You can change the temperature at any time. Use the
temperature selector to set the required
temperature.
8.1Setting rapid heating
To ensure an even cooking result, do not place the food in the cooking
compartment until rapid heating has come to an end. 1. Use the function
selector to select rapid heating . 2. Use the temperature selector to set the
required
temperature. a Rapid heating starts after a few seconds. a When the rapid
heating process ends, an audible
signal sounds and the heating indicator goes out. 3. Use the function selector
to set a suitable type of
heating. 4. Place the food in the cooking compartment.
minutes. The timer has its own audible signal so that you can tell whether it
is the timer or a cooking time which has elapsed. Note: The timer and cooking
time cannot count down at the same time. If a cooking time has already been
set, you cannot set the timer.
1. Press the button repeatedly until is highlighted in the display.
2. Use the or button to set the timer duration.
Button
Default value 5 minutes 10 minutes
The timer duration can be set in 30-second increments up to 10 minutes. Above
10 minutes, the time increments become longer the higher the value. a The
timer starts and the timer duration begins to count down after a few seconds.
a An audible signal sounds and the timer duration is zero in the display when
the timer duration has elapsed. 3. Once the timer duration has elapsed: Press
any button to switch off the timer.
Changing the timer You can change the timer duration at any time. Requirement:
is highlighted on the display.
10
Use the or button to change the timer duration. a The appliance applies the
change after a few
seconds.
Cancelling the timer You can cancel the timer duration at any time.
Requirement: is highlighted on the display. Use the button to reset the timer
duration to zero. a After a few seconds, the appliance applies the
change and goes out.
9.3Setting the cooking time
You can set a cooking time for operation of up to 23 hours 59 minutes.
Requirement: The type of heating and temperature or setting are set. 1. Press
the button repeatedly until is highlighted
in the display. 2. Use the or button to set the cooking time.
Button
Default value 10 minutes 30 minutes
The cooking time can be set in 1-minute increments up to 1 hour, and then in
5-minute increments. a The appliance starts heating and the cooking time
counts down after a few seconds. a If the cooking time has elapsed, an audible
signal sounds and the display shows the cooking time as zero. 3. When the
cooking time has elapsed: Press any button to end the audible signal before
it sounds. To set a cooking time again, press the button. When your food is
ready, switch off the appli-
ance.
Changing the cooking time You can change the cooking time at any time.
Requirement: is highlighted on the display. Change the cooking time using the
or button. a The appliance applies the change after a few
seconds.
Cancelling the cooking time You can cancel the cooking time at any time.
Requirement: is highlighted on the display. Reset the cooking time to zero
using the button. a After a few seconds, the appliance applies the
change and continues to heat without a cooking time.
9.4Setting the end time
You can delay the time at which cooking is due to finish by up to 23 hours and
59 minutes. Notes ¡ The end time cannot be set for types of heating with
grill function. ¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in operation.
Time-setting optionsen
¡ Food will spoil if you leave it in the cooking compartment too long.
Requirements ¡ The type of heating and temperature or setting are
set. ¡ A cooking time is set. 1. Press the button repeatedly until is
highlighted
in the display. 2. Press the or button. a The display shows the calculated end
time. 3. Use the or button to delay the end time. a After a few seconds, the
appliance applies the set-
ting and the display shows the set end time. a Once the calculated start time
has been reached,
the appliance starts heating up and the cooking time starts counting down. a
Once the time has elapsed, an audible signal sounds and the display shows the
cooking time as zero. 4. When the cooking time has elapsed: Press any button
to end the signal prematurely. To set another cooking time, press the button.
When your food is ready, switch off the appli-
ance.
Changing the end time In order to achieve a good cooking result, you can only
change the set end time before operation starts and the cooking time starts
counting down. Requirement: is highlighted on the display. Use the or button
to delay the end time. a The appliance applies the change after a few
seconds.
Cancelling the end time You can delete the set end at any time. Requirement:
is highlighted on the display. Reset the end time to the current time plus the
set
cooking time using the button. a After a few seconds, the appliance applies
the
change and starts heating up. The cooking time counts down.
9.5Setting the time on the clock
Once the appliance has been connected to the mains or following a power
failure, the time flashes on the display. The time starts at “12:00”. Set the
current time. Requirement: The function selector must be set to the “Off”
position . 1. Use the or button to set the time. 2. Press the button. a The
time that is set appears on the display.
Changing the time on the clock You can change the time on the clock at any
time. Requirement: The function selector must be set to the “Off” position .
- Press and hold the button until the clock flashes
on the display. 2. Use the or button to change the time. a The appliance applies the change after a few
seconds.
11
enChildproof lock
10 Childproof lock
You can secure your appliance to prevent children from accidentally switching
it on or changing the settings. Note: After a power cut, the childproof lock
is deactivated.
10.1Activating and deactivating the childproof lock
Requirement: The function selector must be set to the “Off” position .
To activate the childproof lock, press and hold the
button until
appears in the display.
To deactivate the childproof lock, press and hold
the button until
goes out in the display.
11 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.
11.1Cleaning products
In order to avoid damaging the various oven surfaces on the appliance, do not
use unsuitable cleaning products.
WARNING Risk of electric shock! An ingress of moisture can cause an electric
shock. Do not use steam- or high-pressure cleaners to
clean the appliance. ATTENTION! Unsuitable cleaning products may damage the
surfaces of the appliance. Do not use harsh or abrasive cleaning products.
Do not use cleaning products with a high alcohol content.
Do not use hard scouring pads or cleaning sponges.
Do not use any special cleaners for cleaning the appliance while it is hot.
Using oven cleaner in a hot cooking compartment damages the enamel. Never use
oven cleaner in the cooking compartment
when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. New
sponge cloths contain residues from production. Wash new sponge cloths
thoroughly before use.
Suitable cleaning agents Only use cleaning products that are suitable for the different surfaces on your appliance.
Follow the instructions on cleaning the appliance. “Cleaning the appliance”, Page 13
Appliance front
Surface Stainless steel
Plastic or painted surfaces E.g. control panel
Suitable cleaning agents Information
¡ Hot soapy water
To prevent corrosion, remove any patches of limescale, grease,
¡ Special stainless steel starch or albumin (e.g. egg white) on stainless steel surfaces imme-
cleaning products
diately.
suitable for hot sur- Apply a thin layer of the stainless steel cleaning product with a soft
faces
cloth.
¡ Hot soapy water
Do not use glass cleaner or a glass scraper.
Appliance door Area Door panels
Door cover
Suitable cleaning agents Information
¡ Hot soapy water
Do not use a glass scraper or a stainless steel wool.
Tip: Remove the door panels in order to clean them thoroughly. “Appliance door”, Page 15
¡ Made of stainless
Do not use glass cleaner or a glass scraper.
steel:
Tip: Remove the door cover for thorough cleaning.
Stainless steel cleaner “Appliance door”, Page 15
¡ Made of plastic:
Hot soapy water
12
Cleaning and servicingen
Area Door handle
Door seal
Suitable cleaning agents Information
¡ Hot soapy water
To avoid permanent stains, remove descaling agents from the door handle immediately.
¡ Hot soapy water
Do not remove or scrub.
Cooking compartment
Area Enamel surfaces
Self-cleaning surfaces Glass cover for the oven light Rails AccessorIes
Suitable cleaning agents Information
¡ Hot soapy water ¡ Vinegar water ¡ Oven cleaner
Soak any heavily soiled areas and use a brush or steel wool. Leave the
appliance door open to dry the cooking compartment after cleaning it. Notes ¡
Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of your appliance is not affected by this. ¡ The
edges of thin trays cannot be completely enamelled and may be rough. This does
not impair corrosion protection. ¡ Food residues will leave a white coating on
the enamel surfaces. The coating does not pose a health risk. The
functionality of your appliance is not affected by this. You can remove
residues with lemon juice.
–
Follow the instructions for self-cleaning surfaces.
“Cleaning self-cleaning surfaces in the cooking compartment”,
Page 13
¡ Hot soapy water
Use oven cleaner to remove very heavy soiling.
¡ Hot soapy water ¡ Hot soapy water ¡ Oven cleaner
Soak any heavily soiled areas and use a brush or steel wool. Tip: Remove the
shelf supports for cleaning. “Shelf supports”, Page 14
Soak any heavily soiled areas and use a brush or steel wool. Enamelled
accessories are dishwasher-safe.
11.2Cleaning the appliance
In order to avoid damaging the appliance, you must clean your appliance only
as specified, and with suitable cleaning products.
WARNING Risk of burns! The appliance and its parts that can be touched become
hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance.
WARNING Risk of fire! Loose food remnants, fat and meat juices may catch fire.
Before using the appliance, remove the worst of the
food residues and remnants from the cooking compartment, heating elements and
accessories. Requirement: Read the information on cleaning products. “Cleaning
products”, Page 12 1. Clean the appliance using hot soapy water and a dish
cloth. For some surfaces, you can use alternative
cleaning agents. “Suitable cleaning agents”, Page 12 2. Dry with a soft cloth.
11.3Cleaning self-cleaning surfaces in the cooking compartment
The back panel in the cooking compartment is selfcleaning. The self-cleaning
surfaces are coated with a porous, matte ceramic layer and have a coarse
surface. When the appliance is in operation, the self-cleaning surfaces absorb
splashes from baking, roasting or grilling and break them down. If the self-
cleaning surfaces no longer clean themselves adequately during operation, heat
up the cooking compartment specifically to the right temperature. ATTENTION!
If you do not clean the self-cleaning surfaces regularly, they may become
damaged. If dark stains are visible on the self-cleaning sur-
faces, heat up the cooking compartment. Do not use oven cleaner or abrasive
cleaning aids.
If oven cleaner accidentally comes into contact with the self-cleaning
surfaces, dab it off immediately using water and a sponge cloth. Do not rub.
- Remove accessories and cookware from the cooking compartment. 2. Detach the shelf supports and remove them from the cooking compartment. “Shelf supports”, Page 14 3. Remove coarse dirt using soapy water and a soft cloth: From the smooth enamel surfaces From the inside of the appliance door
13
enCleaning assistance
From the glass cover on the oven light This prevents stains that cannot be
removed. 4. Remove any objects from the cooking compartment. The cooking
compartment must be empty. 5. Use the function selector to set 3D hot air. 6.
Use the temperature selector to set the maximum temperature. a The appliance
starts heating after a few seconds. 7. Switch off the appliance after one
hour. 8. Once the appliance has cooled down, wipe the cooking compartment with
a damp cloth.
12 Cleaning assistance
The cleaning assistance is a fast alternative for occasionally cleaning the
cooking compartment. The cleaning assistance softens dirt by vaporising the
soapy water. The dirt can then be removed more easily.
12.1Setting the cleaning assistance
WARNING Risk of scalding! If there is water in the cooking compartment when it
is hot, this may create hot steam. Never pour water into the cooking
compartment
when the cooking compartment is hot. Requirement: The cooking compartment has
cooled down completely. 1. Remove the accessories from the cooking compart-
ment. 2. Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compartment floor. Do not use
distilled water. 3. Use the function selector to set the Bottom heating type
of heating. 4. Use the temperature selector to set 80 °C. 5. Press the button
repeatedly until is highlighted in the display. 6. Use the or button to set
the time to four minutes. a After a few seconds, the appliance starts heating
and the cooking time counts down.
13 Shelf supports
To clean the rails and the cooking compartment, or to replace the rails, you
can remove these.
13.1Detaching the shelf supports
WARNING Risk of burns! The shelf supports get very hot Never touch the shelf
supports when hot. Always allow the appliance to cool down. Keep children at a
safe distance. 1. Lift the rail forwards slightly and detach it .
Note: Marks may appear on the self-cleaning surfaces. Residues of sugar and
egg white in the food are not removed and stick to the surfaces. Red stains
are residues from salty food they are not rust. The stains are not hazardous
to health. These marks do not impair the cleaning ability of the selfcleaning
surfaces. 9. Attach the shelf supports. “Shelf supports”, Page 14
a When the cooking time has elapsed, a signal sounds and the duration is at
zero in the display.
7. Switch off the appliance and leave the cooking compartment to cool down
for 20 minutes.
12.2Recleaning the cooking compartment
ATTENTION! The prolonged presence of moisture in the cooking compartment leads
to corrosion. After using the cleaning assistance, wipe the cook-
ing compartment and allow it to dry completely. Requirement: The cooking
compartment has cooled down. 1. Open the appliance door and remove the
remaining
water with an absorbent sponge cloth. 2. Clean the smooth surfaces in the
cooking compart-
ment with a dish cloth or a soft brush. Remove stubborn food remnants using a
stainless steel scouring pad. 3. Remove limescale with a cloth soaked in
vinegar. Then wipe with clean water and rub dry with a soft cloth (including
under the door seal). 4. Once the cooking compartment is cleaned sufficiently:
To allow the cooking compartment to dry, open
the appliance door to the stop position (approx. 30°) and leave it open for
approx. one hour. To dry the cooking compartment quickly, heat up the
appliance for approx. five minutes at 3D hot air and 50 °C while the door is
open.
2. Pull the whole rail to the front and remove it.
14
3. Clean the rail. “Cleaning products”, Page 12
13.2Attaching the shelf supports
Notes ¡ The rails only fit on the right or left. ¡ For both rails, ensure that
the curved rods are at the
front. 1. First, push the rail into the middle of the rear
socket until the rail rests against the cooking compartment wall, and then
push this back .
Appliance dooren 2. Push the rail into the front socket until the rail
also rests against the cooking compartment wall, and then press this downwards
.
14 Appliance door
To ensure that your appliance retains its appearance and remains fully
functioning for a long time, you can detach the appliance door and clean it.
14.1Detaching the appliance door
WARNING Risk of injury! Components inside the appliance door may have sharp
edges. Wear protective gloves. The hinges on the appliance door move when the
door is opened and closed, which could trap your fingers. Keep your hands away
from the hinges. 1. Open the appliance door fully.
WARNING Risk of injury!
When the hinges are not secured, they can snap
shut with great force.
Make sure that the locking levers are always
either fully closed or (when detaching the oven
door) fully open.
Open the locking levers on the left- and right-hand hinges.
Locking levers opened
Locking levers closed
The hinge is now secured and cannot snap shut.
The appliance door is secured and cannot be detached. a The locking levers are open. The hinges are now secured and cannot snap shut.
15
enAppliance door 3. Close the appliance door fully . Grab hold of the
appliance door with both hands (on the left and right) and pull it upwards and
out .
2. Open the locking levers on the left- and right-hand hinges .
a The locking levers are open. The hinges are now secured and cannot snap
shut.
3. Close the appliance door fully .
4. Carefully place the appliance door on a level surface.
14.2Attaching the appliance door
WARNING Risk of injury! The hinges on the appliance door move when the door is
opened and closed, which could trap your fingers. Keep your hands away from
the hinges. When the hinges are not secured, they can snap shut with great
force. Make sure that the locking levers are always either
fully closed or (when detaching the oven door) fully open. 1. Slide the
appliance door straight onto the two hinges . Slide the appliance door on as
far as it will go. 2. Open the appliance door fully. 3. Close the locking
levers on the left- and right-hand hinges .
4. Push on the left- and right-hand side of the door cover from the outside
until it is released.
5. Remove the door cover . 6. Lift out the inner pane and set it down
carefully on a
flat surface.
a The locking levers are closed. The appliance door is secured and cannot be
detached.
4. Close the appliance door.
14.3Removing the door panes
WARNING Risk of injury! The hinges on the appliance door move when the door is
opened and closed, which could trap your fingers. Keep your hands away from
the hinges. Components inside the appliance door may have sharp edges. Wear
protective gloves. 1. Open the appliance door fully.
16
7. If necessary, you can remove the condensate trough for cleaning. Open the appliance door. Tilt the condensate trough upwards and remove it.
Appliance dooren 3. Slide the inner pane into the left- and right-hand re-
tainers .
WARNING Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with glass cleaner and a soft cloth. 9. Clean the condensate trough with a cloth and hot soapy water. 10. Clean the appliance door. “Suitable cleaning agents”, Page 12 11. Dry the door panes and refit them. “Fitting the door panes”, Page 17
14.4Fitting the door panes
WARNING Risk of injury! The hinges on the appliance door move when the door is
opened and closed, which could trap your fingers. Keep your hands away from
the hinges. Components inside the appliance door may have sharp edges. Wear
protective gloves. 1. Open the appliance door fully. 2. Place the condensate
trough vertically in the re-
tainer and turn it downwards.
4. Push the inner pane upwards until it is in the leftand right-hand
retainers .
5. Put the door cover in position and push down on it until you hear it click
into place.
6. Open the appliance door fully. 7. Close the locking levers on the left-
and right-hand
hinges .
a The locking levers are closed. The appliance door is secured and cannot be
detached.
8. Close the appliance door. Note: Do not use the cooking compartment again
until the door panes have been correctly fitted.
17
enTroubleshooting
15 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the
troubleshooting information before contacting after-sales service. This will
avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the
appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer
Service.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
15.1Malfunctions
Fault
Cause and troubleshooting
The appliance is not The circuit breaker in the fuse box has tripped.
working.
Check the circuit breaker in the fuse box.
There has been a power cut. Check whether the lighting in your kitchen or
other appliances are working.
Electronics fault 1. Briefly disconnect the appliance from the power supply by
switching off the fuse. 2. Reset the basic settings to the factory settings.
The appliance does not switch off fully at the end of a cooking time.
At the end of a cooking time, the appliance stops heating up. The oven light
and cooling fan do not switch off. For types of heating with recirculation,
the fan continues to run in the back wall of the cooking compartment.
Turn the function selector to the off position. a The appliance is switched
off. a The oven light and the fan in the back wall are switched off. a The
cooling fan switches off automatically as soon as the appliance has cooled
down.
The time flashes in the display.
There has been a power cut. Reset the time.
“Setting the time on the clock”, Page 11
lights up in the Childproof lock is activated.
display and no settings can be made on the appliance.
Use the button to deactivate the childproof lock. “Childproof lock”, Page 12
A message with ap- Electronics fault
pears in the display, 1. Press the button.
e.g. – .
If required, reset the time.
a If the fault was a one-off, the error message disappears.
2. If the error message appears again, call the after-sales service. Quote the exact error
message and the E no. of your appliance.
“Customer Service”, Page 19
15.2Replacing the oven light bulb
If the light in the cooking compartment fails, change the oven light bulb.
Note: Heat-resistant, 25-watt, 230 V halogen bulbs are available from the
after-sales service or specialist retailers. Only use these bulbs. Hold the
new halogen bulbs only with a clean, dry towel. This increases the service
life of the bulb.
WARNING Risk of burns! The appliance and its parts that can be touched become
hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance. WARNING Risk of electric shock!
When changing the bulb, the bulb socket contacts are live. Before replacing
the bulb, ensure that the appliance
is switched off in order to prevent a potential electric shock. Also unplug
the appliance from the mains or switch off the circuit breaker in the fuse
box.
18
WARNING Risk of injury! The glass cover may already have broken due to
external influences or it may break due to excessive pressure when being
installed or removed. Exercise caution when installing or removing the
glass cover. Use gloves or a tea towel. Requirements ¡ The appliance is
disconnected from the power sup-
ply. ¡ The cooking compartment has cooled down. ¡ You must have a new halogen
lamp to replace the
old one. 1. Place a tea towel in the cooking compartment to
prevent damage. 2. Turn the glass cover anti-clockwise to remove it .
16 Disposal
16.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance
from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in
an environmentally
friendly manner. Information about current disposal methods are available from
your specialist dealer or local authority.
17 Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign
Order can be obtained from Customer Service for a period of at least 10 years
from the date on which your appliance was placed on the market within the
European Economic Area. Note: Under the terms of the manufacturer’s warranty
the use of Customer Service is free of charge. Detailed information on the
warranty period and terms of warranty in your country is available from our
aftersales service, your retailer or on our website. If you contact Customer
Service, you will require the product number (E-Nr.) and the production number
(FD) of your appliance. The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our website.
Disposalen 3. Pull out the halogen bulb without turning it .
4. Insert the new halogen bulb and press it firmly into the socket. Make sure
that the pins are positioned correctly.
5. Depending on the appliance model, the glass cover may have a sealing ring.
Attach the sealing ring.
6. Screw in the glass cover. 7. Remove the tea towel from the cooking
compart-
ment. 8. Connect the appliance to the power supply.
This appliance is labelled in accordance with European Directive 2012/19/EU
concerning used electrical and electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline determines the framework for the
return and recycling of used appliances as applicable throughout the EU. This
product contains light sources from energy efficiency class G.
17.1Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the
appliance’s rating plate. You will see the rating plate with these numbers if
you open the appliance door. Make a note of your appliance’s details and the
Customer Service telephone number to find them again quickly.
19
enHow it works
18 How it works
Here, you can find the ideal settings for various types of food as well as the
best accessories and cookware. We have perfectly tailored these
recommendations to your appliance.
18.1Cooking tips
Observe this information when preparing food. ¡ The temperature and cooking
time depend on the
amount of food and the recipe. Settings ranges are specified for this reason.
Try using the lower values to start with. ¡ The setting values apply to food
placed in the cooking compartment while the cooking compartment is still cold.
Do not slide the accessory into the cooking compartment until it has finished
preheating. ¡ Remove any accessories that are not being used from the cooking
compartment.
18.2Notes on baking
When baking, use the shelf positions indicated.
Baking on one level Deep baked goods or tin on wire rack Flat baked goods or goods in a baking tray
Height 2 3
Baking on two levels Universal pan Baking tray Baking tins/dishes on the wire rack: First wire rack Second wire rack
Height 3 1 Height 3 1
Baking on three levels Baking tray Universal pan Baking tray
Height 5 3 1
Notes ¡ When baking on several layers, always use hot air.
Baked goods that are placed in the oven at the same time will not necessarily
be ready at the same time. ¡ Position baking tins/dishes either next to one
another or offset on different shelves so that they are not directly one above
the other in the cooking compartment. ¡ For best results, we recommend using
dark-coloured metal bakeware.
18.3Notes on roasting and grilling
The setting values are based on the assumption that unstuffed, chilled, ready-
to-roast poultry, meat or fish is placed into a cold cooking compartment.
ATTENTION! Acidic food may damage the grid Do not place acidic food, such as
fruit or food with
an acidic marinade directly on the pan support.
¡ The larger the poultry, meat or fish, the lower the cooking temperature and
the longer the cooking time.
¡ Turn the poultry, meat or fish after approx. 1/2 to 2/3 of the time listed.
¡ Add a little liquid to the poultry in the cookware. Cover the bottom of the
cookware with approx. 1 2 cm of liquid.
¡ When you turn poultry, ensure that the breast side or skin side is
underneath to begin with.
¡ Cooking time calculation (e.g. 20 + 35): To calculate the cooking time,
assume 20 minutes per 500 g of meat plus an extra 35 minutes. For 1.5 kg, the
cooking time is then 95 minutes.
¡ Cooking time range (e.g. 1015): Your food will be ready within the
specified range of time.
Information for those allergic to nickel In rare cases, small amounts of
nickel may pass into the food. Roasting and grilling on the wire rack Roasting
on the wire rack works particularly well for large poultry or for multiple
pieces at the same time. ¡ Depending on the size and type of the food to be
roasted, add up to 1/2 litre water to the universal pan. You can make a sauce
from the juices that are collected. This also means that less smoke is
produced and the cooking compartment does not become as dirty. ¡ Keep the
appliance door closed when using the grill. Never grill with the appliance
door open. ¡ Place the food to be grilled on the wire rack. In addition, slide
the universal pan in at least one shelf position lower, with the slanted edge
facing the appliance door. This means that any dripping fat is caught.
Roasting in cookware When preparing food in cookware with a lid, the cooking
compartment remains cleaner. Follow the manufacturer’s instructions for your
roasting dishes. Glass cookware is best.
Cookware without lid ¡ Use a deep roasting dish. ¡ Place the cookware onto the
wire rack. ¡ If you do not have any suitable cookware, use the
universal pan.
Cookware with lid ¡ Place the cookware onto the wire rack. ¡ Meat, poultry and
fish can also become crispy in a
covered roasting dish. Use a roasting dish with a glass lid. Set a higher
temperature.
WARNING Risk of injury! If hot glass cookware is placed on a wet or cold
surface, the glass may shatter. Place hot glass ovenware on a dry mat after
cook-
ing.
20
How it worksen
WARNING Risk of scalding! Very hot steam may escape when the lid is opened
after cooking. Steam may not be visible, depending on the temperature. Lift
the lid in such a way that the hot steam can es-
cape away from you. Keep children away from the appliance.
18.4Food selection
Food
Accessories/cookware Shelf pos- Type of
ition
heating
Victoria sponge cake
2 pcs
2
Ø 20 cm cake tin
Rich fruit cake
Deep 23 cm diameter 2 tin
Fruit pie
20 cm diameter plate or 2 pie tin
Quiche
Quiche tin (dark-coated) 3
(White) bread
Loaf tin (1 x 900 g or 2 2 x 450 g)
Scones
Baking sheet on wire 3 rack
Biscuits
Baking sheet on wire 3 rack
Small cakes
12-cup tin
3
Pavlova
Baking sheet on wire 3 rack
Yorkshire pudding
12-cup tin
3
Pizza, home-made
Baking tray
3
Pizza, home-made, thin base
Round pizza tray
2
Victoria sponge cake, 2 levels
4 pcs
3+1
Ø 20 cm cake tin
Biscuits, 2 or 3 levels
Baking sheet on wire rack
3+1 5+3+1
Beef, top side/top rump
Cookware without lid 2
Lamb leg (on the bone)
Cookware without lid 2
Pork belly
Cookware without lid 2
Chicken, whole
Wire rack
2
Turkey, crown
Wire rack
2
Turkey, whole, 48 kg
Wire rack
1
Fish, braised, whole 300 g, e. g. trout Cookware with lid
2
Diced meat (beef, pork, lamb), 500 g Cookware with lid
2
1 Preheat the appliance. Do not use the rapid heating function. 2 Preheat the appliance. 3 Preheat the appliance for five minutes. Do not use the rapid heating function. 4 Preheat the appliance to 150 °C using HotAir. 5 Preheat the appliance for 20 minutes. 6 Do not turn the food. 7 Slide the universal pan underneath the wire rack. 8 Turn the food after approx. one hour. 9 Preheat the appliance for 5 minutes. 10 Preheat the appliance for 3 minutes. 11 Turn the food occasionally.
Temperature in °C/grill setting 150-1701
140-150
160-170
180-200 190-2101
190-2002
140-1601
1503 90-1004
200-2205 190-210 250-270 150-1602
140-1602
170 160-170 1. 170-180 2. 2 170-180 140-150 150-160 170-190 140
Cooking time in mins
15-25
180-210
60-70
40-55 25-40
10-15
10-20
25-35 160-180
15-25 20-30 8-13 20-30
15-25
40+30 25+15 1. 30+306 2. 3-5 25+157 20+25 12+128 25-35 120-140
21
enHow it works
Food
Accessories/cookware Shelf pos- Type of
ition
heating
Complete meal with chicken Bacon rashers
Wire rack
4+1
Wire rack
Universal pan
Wire rack
3
Sausages, thickness 24 cm
Wire rack
3
Pork, gammon joint
Cookware without lid 2
Chicken, whole
Cookware without lid 2
1 Preheat the appliance. Do not use the rapid heating function. 2 Preheat the appliance. 3 Preheat the appliance for five minutes. Do not use the rapid heating function. 4 Preheat the appliance to 150 °C using HotAir. 5 Preheat the appliance for 20 minutes. 6 Do not turn the food. 7 Slide the universal pan underneath the wire rack. 8 Turn the food after approx. one hour. 9 Preheat the appliance for 5 minutes. 10 Preheat the appliance for 3 minutes. 11 Turn the food occasionally.
Temperature in °C/grill setting 180, then 200 (Yorkshire pudding)
39
310 170-180 170-180
Cooking time in mins
Chicken: (25+25) + 20 for Yorkshire pudding 1 side 45 2 side 34 10-2011
25+206 20+207
18.5Yoghurt
You can use your appliance to make your own yoghurt.
Preparing yoghurt 1. Remove the accessories and shelf supports from
the cooking compartment. 2. Pour the previously prepared yoghurt mixture into
small containers, e.g. into cups or small jars.
3. Cover the containers with foil, e. g. with cling film. 4. Place the
containers on the cooking compartment
floor. 5. Set the appliance according to the recommended
setting. 6. After making the yoghurt, leave it to cool in the refri-
gerator.
Recommended settings for yoghurt
Food
Accessories/cookware Shelf position
Type of heating
Yoghurt
Individual moulds
1 Preheat the appliance.
Cooking compartment 1.
floor
Temperature in °C 1. 1001 2. –
Cooking time in mins 1. 2. 89 hrs
18.6Test dishes
These overviews have been produced for test institutes to facilitate appliance
testing in accordance with EN 60350-1. Baking Observe this information when
baking test dishes.
General information ¡ The settings apply to food that is placed into a cold
cooking compartment. ¡ Observe the notes about preheating in the tables.
These setting values apply without rapid heating. ¡ When baking, use the lower
of the listed temperat-
ures to begin with.
Shelf positions Shelf positions for baking on two levels:
Note: Items that are placed in the oven on baking trays or in baking
tins/dishes at the same time will not necessarily be ready at the same time. ¡
Universal pan: Level 3
Baking tray: Level 1 ¡ Baking tins/dishes on the wire rack
First wire rack: Level 3 Second wire rack: Level 1 Shelf positions for baking
on three levels: ¡ Baking tray: Level 5 Universal pan: Level 3 Baking tray:
Level 1 Baking with two springform cake tins:
22
Position baking tins/dishes either next to one another or offset on different shelves so that they are not directly one above the other in the cooking compartment.
Installation instructionsen
Recommended settings for baking
Food
Accessories/cookware Shelf pos- Type of
ition
heating
Viennese whirls
Baking tray
3
Viennese whirls
Baking tray
3
Viennese whirls, 2 levels
Universal pan + Baking tray
3 + 1
Viennese whirls, 3 levels
Universal pan + Baking tray
5 + 3 + 1
Small cakes
Baking tray
3
Small cakes
Baking tray
3
Small cakes, 2 levels
Universal pan + Baking tray
3 + 1
Small cakes, 3 levels
Universal pan + Baking tray
5 + 3 + 1
Hot water sponge cake
Springform cake tin,
2
diameter 26 cm
Hot water sponge cake
Springform cake tin,
2
diameter 26 cm
Hot water sponge cake, 2 levels
Springform cake tin, diameter 26 cm
3 + 1
1 Preheat the appliance for five minutes. Do not use the rapid heating function. 2 Preheat the appliance. Do not use the rapid heating function.
Temperature in °C
140-1501 140-1501 140-1501
Cooking time in mins 25-35 20-30 25-35
130-1401
35-55
150-1601 140-1501 140-1501
20-30 25-35 25-40
1401
30-40
160-1702 160-170 150-1602
25-35 30-35 35-50
Recommended settings for grilling
Food
Accessories/cookware Shelf pos- Type of
ition
heating
Toasting bread
Wire rack
5
1 Preheat the appliance for five minutes. Do not use the rapid heating function.
Temperature in °C/grill setting 31
Cooking time in mins 0.51.5
19 Installation instructions
Observe this information when installing the appliance.
23
enInstallation instructions
19.1General installation instructions Follow these instructions before you
start with the installation of the appliance. ¡ The safe operation of this
appliance can
only be guaranteed if it has been installed to a professional standard in
accordance with these installation instructions. The installer shall be liable
for damages incurred as a result of incorrect installation. ¡ Check the
appliance for damage after unpacking it. Do not connect the appliance if it
has been damaged in transit. ¡ Before starting up the appliance, remove any
packaging material and adhesive film from the cooking compartment and the
door. ¡ Proceed in accordance with the installation sheets for installing
accessories. ¡ Fitted units must be heat-resistant up to 95 °C, and adjacent
unit fronts up to 70 °C. ¡ Do not install the appliance behind a decorative
door or the door of a kitchen unit. There is a risk of overheating. ¡ Cut-out
work on the units should be carried out before installing the appliance.
Remove any shavings. Otherwise, the correct operation of electrical components
may be adversely affected. ¡ The mains socket for the appliance must either be
located in the hatched area or outside of the area where the appliance is
installed. Any unsecured units must be secured to the wall using a standard
bracket .
¡ Wear protective gloves so that you do not cut yourself. Parts that are
accessible during installation may have sharp edges.
¡ Dimensions of the figures in mm.
WARNING Risk of fire! It is dangerous to use an extended power cord and non-
approved adapters. Do not use multiple socket strips. Only use extension
cables that are certified,
have a minimum cross section of 1.5 mm² and comply with the applicable
national safety requirements. If the power cord is too short, contact customer
service. Only use adapters approved by the manufacturer.
ATTENTION!
Carrying the appliance by the door handle
could break it. The door handle cannot sup-
port the weight of the appliance.
Do not carry or hold the appliance by the door handle.
19.2Appliance dimensions
You will find the dimensions of the appliance here
19.3Installation below a worktop
Observe the installation dimensions and the installation instructions when
installing below a worktop.
24
¡ To ventilate the appliance, the intermediate floor must have a ventilation
cut-out.
¡ In combination with induction hobs, the gap between the worktop and
appliance must not be sealed using additional strips.
¡ The worktop must be secured to the fitted unit. ¡ Observe any available
installation instructions for the
hob. ¡ Observe different national installation instructions for
the hob.
19.4Installation in a tall unit
Observe the installation dimensions and the installation instructions when
installing in a tall unit.
Installation instructionsen ¡ Ensure that air exchange is guaranteed in
accord-
ance with the diagram.
¡ Only fit appliances up to a height that allows accessories to be easily
removed.
19.6Corner installation
Observe the installation dimensions and the installation instructions when
installing in a corner.
¡ To ventilate the appliance, the intermediate floors must have a ventilation
cut-out.
¡ If the tall unit has another back panel in addition to the element back
panels, this must be removed.
¡ Only fit the appliance up to a height which allows accessories to be easily
removed.
19.5Installing two appliances on top of each other
Your appliance can also be installed above or below another appliance. Observe
the installation dimensions and the installation instructions when installing
appliances on top of each other.
¡ To ventilate the appliances, the intermediate floor must have a ventilation
cut-out.
¡ To ensure sufficient ventilation of the two appliances, there must be a
ventilation opening of at least 200 cm² in the base area. To do this, trim the
base panel or fit a ventilation grille.
¡ To ensure that the appliance door can be opened, you must take the minimum
dimensions into consideration when installing in a corner. The dimension is
dependent on the thickness of the unit front and the handle.
19.7Electrical connection
In order to safely connect the appliance to the electrical system, follow
these instructions. ¡ The appliance corresponds to protection class I and
must only be operated with a protective earth connection. ¡ The fuse
protection must correspond to the power rating specified on the appliance’s
rating plate and to the local regulations. ¡ The appliance must be
disconnected from the power supply whenever installation work is being carried
out. ¡ The appliance must only be connected using the power cable provided. ¡
The power cable must be plugged in at the rear of the appliance until you hear
a clicking sound. A 3 m power cable can be obtained from the after-sales
service. ¡ The power cable must only be replaced with a cable from the
original manufacturer. This is available from after-sales service.
25
enInstallation instructions
¡ Contact protection must be guaranteed by the installation.
Electrically connect the appliance with the protective contact plug Note: The
appliance must only be connected to a protective contact socket that has been
correctly installed. Insert the plug into the protective contact socket.
When the appliance is installed, the mains plug of the power cord must be
freely accessible. If free access is not possible, an isolating switch must be
integrated into the permanent electrical installation according to the
installation regulations. Electrically connecting an appliance without a
protective contact plug Note: Only licensed specialists may connect the
appliance. Damage caused by incorrect connection is not covered under the
warranty. An isolating switch must be integrated into the permanent electrical
installation according to the installation regulations. 1. Identify the phase
and neutral conductors in the socket. The appliance may be damaged if it is
not connected correctly. 2. Connect the hob in accordance with the connection
diagram. See the rating plate for the voltage. 3. Connect the wires of the
mains power cable according to the colour coding: Green/yellow = Protective
conductor Blue = Neutral conductor Brown = Phase (external conductor)
19.8Installing the appliance
1. Slide the appliance in fully and centre it.
3. For handleless kitchens with vertical bar handle strips: Attach a suitable
filling piece in order to cover any sharp edges and to guarantee a safe
installation. Pre-drill aluminium profiles to establish a screw connection .
Secure the appliance using a suitable screw .
Note: The gap between the worktop and the appliance must not be closed by
additional battens. Thermal insulation strips must not be fitted to the side
panels of the surround unit.
19.9Removing the appliance
1. Disconnect the appliance from the power supply. 2. Undo the fastening
screws. 3. Lift the appliance slightly and pull it out completely.
2. Screw the appliance into place.
26
Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from: · Expert
tips & tricks for your appliance · Warranty extension options · Discounts for
accessories & spare-parts · Digital manual and all appliance data at hand ·
Easy access to Bosch Home Appliances Service Free and easy registration also
on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair
from Bosch experts. Find out everything about the many ways Bosch can support
you: www.bosch-home.com/service Contact data of all countries are listed in
the attached service directory.
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch-
home.com A Bosch Company
9001594767
9001594767(030403) en
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom
References
- Home Appliances Global Website | Bosch
- Home Appliances Global Website | Bosch
- Bosch Service | Service worldwide
- Welcome to MyBosch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>