tuya F11XD Smart Tag Finder User Manual

Regulatory Safety Information

WARNING: KEEP BATTERIES OUT OF REACH OF
CHILDREN
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poison Information Centre for fast expert advice.
KEEP BATTERIES OUT OF REACH OF CHILDREN

• Keep in original package until ready to use

• Call a local poison control center for treatment information.
  Australia: 13 11 26 Canada: 1-800-268-9017(Ontario), 1-800-567-8911(BC), 1-800-463-5060 (Quebec) US: 800-498-8666.Verify suitable. emergency call numbers for your country.

• Do not use if the compartment is not secure.

• Dispose of used button batteries promptly and safely. Flat batteries
  can still be dangerous.

• Risk of fire and burns.

• Do not recharge, disassemble, heat (-20°C +70°C)or incinerate.

European Union-Disposal Information
The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

Safety Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. The
foregoing legal communication refers to the wireless telecommunication operated according to the telecommunications laws and regulations.
The low power frequency electric machinery should be able to tolerate the interference of the electric wave radiation electric machineries and equipment for legal communications or industrial and scientific applications.

Product overview

Apple system

1. Turn on the device
   Press and hold the button for 5 seconds, the device will beep and turn on.

2.   Pair the device
   • Open the Find My app.
   •  Hold the device close to your iPhone, tap the
   Items tab, tap + and then Add Other Item.
   • Tap Connect.
   •  Type a name for your device, select an emoji.
   • Tap Agree to acknowledge that this item will be linked to your Apple ID.
   •  Tap Finish.

3.   Enable Lost Mode
   •  Open the Find My app, tap the Items tab, then tap your item.
   •  Under Lost Mode, tap Enable.
   •  Read the instructions, tap Continue and enter a phone number or email address.
   • Confirm the information, customize the lost message, and tap Activate to complete the setup.

4. Remove the device
   • Open the Find My app, tap the Items tab, then tap your item.
   • Tap Remove Item and then tap Remove to complete the operation.
   Note: After removing the device in the app, the device will beep and the light will flash six times, it will not shut down and will be in the pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing state, and the device and app cannot be paired at this time. If you need to pair the device, you need to click the device button once, the device will ring and the light will flash once. At this point, the device enters the pairing state and can be re-paired with the app.

Android system

1. Download Findthing App
   Search for “Findthing” on the Google play, or scan the below QR code to download the Findthing App.
   https://h5.nutspace.com/app/download?app=findthing

2.  Sign up
   Open Findthing App, and sign up.

3. Turn on Bluetooth and Location service
   Note: Please do not pair the device in the phone’s Bluetooth list, otherwise, the device will not be connected to the App.

4. Pair the device
   Tap the “+” button in Findthing App, and pair the device.

5. Ring the device

6. Attach the device to the things you care about

• More introductions and FAQ please refer to the ‘help’ section in Findthing App.

Instructions for device button

1. Power on
   After installing the battery, long press the button for five seconds, the device will beep, the light will flash three times, and the device will be turned on.

2. Device status confirmation
   Double-click the device button, the device will beep, and the light will flash three times, indicating that the device is working. If the device does not ring, the device is off. Long press the button for five seconds to turn it on.

3. The device enters the pairing state again After removing the device in the app, the device will beep and the light will flash six times, it will not shut down and will be in the pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing state. If you want to pair a device at this time, you need to click the device button once, the device will beep, and the light will flash once. At this time, the device enters the pairing state and can be paired with the app again.

4.  Factory Reset
   First, remove the item from Find My app then, after the device is powered on, double-click the device button. The device will beep. Long press the device button for eight seconds until the device beeps and the light flashes three times. Release the button to complete factory reset. The device can now be paired.

5.  Power off
   When the device is on, press the device button 5 times in 2 seconds. The device will beep, the light will flash three times, the device will be powered off.

FAQ:

When can the device be located?

When an item is separated from its owner for a period of time, it can be found by other Apple devices that are part of the Find My network, and the owner can start to get the location of the device.

How to confirm whether the device has been turned on?

Double-click the device button, the device will beep, and the light will flash three times, indicating that the device is working. If the device does not ring, the device is off. Long press the button for five seconds to turn it on.

How is my privacy protected?

Only you can see where your item is. Your location data and history are never stored on the item itself. Devices that relay the location of your item also stay anonymous, and that location data is encrypted every step of the way. So not even Apple or Nutale knows the location of your device or the identity of the device that helps find it.

How to replace the battery:

1. Open the device from the notch side. 2) Replace the battery with a new one. (Positive pole upward). 3) Assemble the device and long press the button for 5 seconds to restart it.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used In portable exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.lf this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Legal notice

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Watch, iPad, iPadOS, iPod touch, Mac, macOS, and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>