Cnapes D01 Water Flosser Picks Cordless User Manual

Cnapes D01 Water Flosser Picks Cordless

IMPORTANT SAFEGUARDS

• THANK YOU VERY MUCH FOR USING THIS ATOMIZING FLOSSER.THIS IS A FLOSSER WITH HUMIDIFICATION FUNCTION, PLEASE READ THIS MANUAL CAREFULLY TO ENSURE THE CORRECT AND SAFE USE OF THIS PRODUCT.
• WARNING : To reduce the risk of burns, electrocution, fire, or injury to persons:
• Please place this product out of the reach of children and infants, not to be used as a toy.
• A user supplied USB charger with the following specifications is required to charge this product: USB Type-A, Rated Output: 5.0 VDC, 1.0 A.
• Please do not put the product into the fire, heating or immersed in water, to avoid the product function failure.
• Please do not use wet hands to plug and unplug the charging plug, when unplugging the charger, please be sure to hold the charger plug rather than the charging cable.
• Do not damage or modify the charging device, do not stretch, bend or twist the charging cable, do not put heavy objects on the charging cable or let the charging cable get stuck between objects.
• Do not drop or insert foreign objects into any openings of the product.
• Do not place the product or the charging cable on a heated surface.
• Do not place the product in a hot or humid place, and avoid direct sunlight.
• Before cleaning and maintenance, please ensure that the product is not in the charging and is off state.
• People who do not have full civil capacity and other lack of relevant experience and knowledge (including children) must use, clean and maintain the product under the supervision and guidance of a guardian.
• Do not use iodine, saline (salt solution), or water insoluble concentrat­ed essential oils in this product. Use of these can reduce performance and will shorten the life of the product.
• please do not put pure mouthwash liquid into this product, if you need to use mouthwash
• please dilute it in proportion before loading.
• Do not use and operate this product in outdoor places with aerosol (spray) or oxygen supply.
• Do not fill the tank with hot water above 40°C and clean the mouth to avoid scalding;
• Please do not disassemble the product or change the parts of the product to avoid damage or in the event of danger.
• Periodontal disease patients or oral surgery in the last 2 months, please consult a doctor before use.
• Please do not press the nozzle hard on the gums or in the teeth to avoid injury;
• Please do not use this product for purposes other than oral cleaning.
• Please do not use this product without the installation of the nozzle.

PRODUCT STRUCTURE

• THIS HUMIDIFICATION FLOSSER CONSISTS OF TWO PARTS: THE HUMIDIFIER AND THE FLOSSER. FLUSHING AND AT THE SAME TIME CAN BE ATOMIZED STERILIZATION FRESH BREATH.

1.  Fogging box cover
2. Fogging Box
3. Spray port
4. Fogger switch
5. Spray tube (can be loaded and unloaded)
6.  Tooth flosser water filling port cover
7. Tooth flosser charging seat dust cover
8. Body
9. Tooth flosser switch (long press to turn on/off, tap to switch gears)
10. Flosser gear indicator
11. Flosser water tank (retractable up and down)

Humidifier can be inserted and pulled out of the main unit

• To ensure the use of the effect, please replace the bumper every six months, if you need to buy the bumper, please buy from the salesman.
• Please do not use unofficial accessories.

USE

IMPORTANT NOTE!

• Start-up work: Please fully charge the device before the first use, connect the charging cable of the device Connect the device, the charging method is type-c charging, the indicator is running light mode, when all indicators At the same time, the white light is always on, indicating that the charging is complete, do not use the machine when charging.

Humidifier use guide

• The Humidifier has a total of 2 atomization modes (continuous gear and intermittent gear)

1. Step 1: Humidifier water tank to add water
   Open the Humidifier water tank cover and fill the water tank with mouthwash (or water).
   Note : Please ensure that the device is off when filling the water tank

Step 2: Start using
Presentation of the spray

1. Long press the atomization button for 1 second, the atomization switch lights up the blue light to open the atomization function, tap to switch the atomization mode (continuous gear and intermittent gear alternately), in the working state long press the atomization
2. button for 1 second to stop the atomization.
3. Fogging function will automatically shut down the equipment for 5 minutes to avoid forgetting to shut down the machine for a long time to affect the service life of the machine Memory mode: automatically turn on the last shutdown mode used when the power is turned on.
4. Vertical upright when using to ensure that the equipment is in the best working condition
5. Note : Humidification function and flushing function can not be used at the same time.

INSTRUCTION ON THE USE OF DENTAL FLOSSER

Step 1: Fill the water tank with water
Remove the atomization tank and open the flosser water tank cover. Fill the water tank with water, or add warm water or mouthwash as appropriate.
Note : Please make sure the device is off when filling the water tank.

Step 2: Install the nozzle

• Insert the nozzle into the hole at the top of the host, when the “click” sound indicates successful installation
• You can adjust the direction of the water jet by rotating the touch head; if you need to replace the nozzle, you can press the release button and gently pull out the nozzle upward.
• When replacing the nozzle: please ensure that the host stopped working.

Note : After removing the nozzle can be placed inside the machine from the water injection port for easy portability.

Step 3: Select mode
here are 5 mode functions, you can select the mode by long pressing the flosser button for 15 when the device is off. The flosser starts to work and the functions of each mode are as follows.

1. Press and hold the flushing button for ls, the flosser works, tap to enter the gear mode of flushing (Normal Soft Pulse Powerful quick). Press and hold the button for 1 second in the on state to  stop working
2. Flushing function works for 2 minutes (except for fast flush 30S), to avoid forgetting to turn off the machine for a long time to affect the use of the machine life.
3. Normal or soft mode is recommend for the first time.
4. Memory mode: automatically turn on the last shutdown mode used when the machine is turned on.

Note: Humidification function and flushing function can not be used at the same time.

Step 4: Prepare before use
Before use, please lean slightly over the washbasin, stick the nozzle into the mouth, aim at the teeth, gums or teeth, rotate the nozzle to adjust the direction of the water jet to ensure that the water flow is perpendicular to the rinsing part, while the mouth is slightly open to facilitate the flow of rinsing water from the mouth.

Warm Tips
When using the flosser for the first time, please start from the lowest gear and gradually adjust the water pressure after your mouth has adapted; when using it, it may cause prickling or slight gum bleeding, which is a normal phenomenon and will generally stop within 1N2 weeks.

Step 5: Use
Long press the switch button, the device starts. This product is equipped with a timer shutdown function, it will automatically shut down after 120 seconds, if you need to continue to use, you can press the switch button to start the device, after use, please turn off the device
Tips for use

• For good cleaning results, start with the molar (back teeth) area and work towards the incisors.
• Start cleaning in the direction of the incisors. When cleaning, move the nozzle at 90 degrees along the line of the dental bed and make a short stop at the molars.
• Stop briefly at the molars. When using the nozzle, keep your lips slightly closed to avoid side-shooting and leave a gap for the water to flow freely in your mouth.
• The water in the mouth flows freely to the sink.

Step 6: End
At the end of use, turn on the device. Drain the liquid remaining in the equipment, the until there is no more water spraying out, then turn off the device.

Step 7: Charge
The indicator light is white, and the light is always on during use. When the device is low on power, the The last gear indicator light will be red flashing continuously for Ss and then shut down, at this time the device needs timely charging. Charging method is TYPE-C charging, the indicator light is in the form of running light when charging Blinking. When the device is fully charged, the white light of all the indicators is always on.

CLEANING & MAINTENANCE

Cleaning and maintenance of the atomizer

• The machine must be turned off before cleaning.
• Remove the atomizer box, wipe the atomizer part with a cotton cloth plus a small amount of neutral detergent.
• Rinse with water and then wipe clean with a dry cloth.

Note : Please make sure to clean it not less than 2 times a week.

Maintenance of the water flosser

• Make sure the device is not connected to a charging device during use.
• Do not immerse the device in water. If necessary, wipe the surface of the device with a soft cloth and a neutral cleaner that does not contain submerge remember.
• Some antimicrobial fluids can shorten the life of the device. After using any special liquid in the tank, do special treatment on the unit after each use: fill the tank with warm water and aim the nozzle at the lavatory sink. Turn on the main unit and let it run until the tank is emptied. This will help prevent clogging of the spray nozzles and check the life of the equipment.
• Be sure to keep the water tank free of residual water before exposing the unit to freezing temperatures.
• If the unit is to be left idle for a long period of time, to maintain battery durability, fully charge the unit before leaving it idle and renew the charge every three months or so.

ENVIRONMENTAL PROTECTION

1. Battery maintenance •
   • The battery must be fully charged before the first use.
   • If stored for a long time, please fully charge the battery before storage.
   • In order to prolong the life of the battery, please charge it immediately when the power is low.
2. Battery recycling
   • This product uses a recyclable rechargeable battery, the product when the end, before discarding the product, be sure to remove the battery, and in accordance with local waste management regulations for recycling or disposal

• How to Recycle: in the state of the equipment off, remove the nozzle and tank bottom cover, using a screwdriver and other tools to pry open the bottom cover of the large body to remove the built-in battery recovery.

Note : Do not allow the removal of the positive and negative levels of the battery short circuit, you can put tape on the leads to insulate them. Insulation.

FAQ & TROUBLESHOOTING

nozzle in place
Charging indicator does not light up| The power socket does not work properly| Replace  the power outlet
 2.Bad contact| 2.Please make sure the charger pins  are inserted  without obstruction
Pressure is not enough| Low voltage use| Fully charged for use
The equipment can not start| Low voltage use| Fully charged for use
No water comes out of the product| Equipment upside down| The water level must be higher than the suction head
2.lnsufficient liquid in the water tank| 2.The water tank is filled with water
3.lnsufficient battery power| 3. fully charged use

BASIC PARAMETERS

water tank

AFTER SALES SERVICE & SUPPORT

CUSTOMER SERVICE 12-MONTH WARRANTY ANY PROBLEM,PLEASE CONTACT Customer Support support@cnapess.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>