uniarch C6N-Ezviz Smart Home Wi-Fi PT Cameras User Guide

uniarch C6N-Ezviz Smart Home Wi-Fi PT Cameras

Product Information

Specifications

Appearance

Dimensions
The actual appearance may vary with device model. The figures below are for illustrative purposes only.

Interfaces
The actual interfaces may vary with device model. The figures below are for illustrative purposes only.

NOTE! The maximum capacity of the Micro SD card (user supplied) is 256GB. Do not hot plug the Micro SD card, otherwise the data of the SD card may be lost. When installing the Micro SD card, please keep the gold contacts upward as shown in the figure below. The network interface is not available to all models.

Indicators

button).
APP/NVR| Flashing blue| The camera started successfully and is waiting for network
connection.
APP| Steady blue| The camera is connecting to network.
APP| | Server disconnected.
APP| | Playing live video.
APP/NVR| | Connected to server successfully.

Product Usage Instructions

Mount Your Camera
Before installation, make sure the ceiling is strong enough to hold the camera. Please prepare hardware accessories separately such as drill bit. The following takes ceiling mount as an example.

1. Locate the drilling position by the base plate, and use a 6mm drill bit to drill 30 mm-depth guide holes on the ceiling.
2. Knock the plastic anchors into the guide holes, and fix the base plate onto the ceiling with ST3.5 screws.
3. Attach the camera to the base plate, and rotate the camera anticlockwise until it is blocked.

Startup
Connect one end of the power adapter to the power interface, and the other end to power supply to start up the camera. When the LED flashes red, it means the camera started up successfully. Then connect the camera to your network.

NOTE! Do not use the camera in a humid environment. Please protect the camera from liquid of any kind.

Add Camera to App
NOTE! The camera can be added only on 2.4GHz Wi-Fi network. It is recommended to sign up for an account before adding the camera. To add the camera without an account, please view tutorial here.

1. Download Uniarch: Scan the QR code below (or search Uniarch in app stores) to download and install the Uniarch app.
2. Signup and login: Sign up for an account and log in. If you already have an account, log in directly.
3. Add device: Tap Add Wi-Fi Device, select “The camera is waiting to be connected”, and tap Next.
4. Prepare: Tap to scan the register code on the quick guide or on the camera, and enter the Wi-Fi password.

FAQ

• Q: What is the maximum capacity of the Micro SD card?
  A: The maximum capacity of the Micro SD card (user supplied) is 256GB.

• Q: How do I reset the camera?
  A: To reset the camera, press and hold the RESET button for about 8 seconds.\

• Q: Can I use the camera in a humid environment?
  A: No, it is not recommended to use the camera in a humid environment. Please protect the camera from liquid of any kind.

Packing List

Remarks:
The package contents may vary with device model and versions.

Appearance

Dimensions
The actual appearance may vary with device model. The figures below are for illustrative purposes only. Interfaces
The actual interfaces may vary with device model. The figures below are for illustrative purposes only.

NOTE!

• The maximum capacity of the Micro SD card (user supplied) is 256GB. Do not hot plug the Micro SD card, otherwise the data of the SD card may be lost.
• When installing the Micro SD card, please keep the gold contacts upward as shown in the figure below.
• The network interface is not available to all models.

Indicators

button).
APP/NVR| The camera started successfully and is waiting for network connection.
APP| Flashing blue| The camera is connecting to network.
APP| Server disconnected.
APP/NVR| Playing live video.
APP| Steady blue| Connected to server successfully.

NOTE!
To reset the camera, press and hold the RESET button for about 8s.

Mount Your Camera

Before installation, make sure the ceiling is strong enough to hold the camera. Please prepare hardware accessories separately such as drill bit. The following takes ceiling mount as an example.

1. Locate the drilling position by the base plate, and use a φ6mm drill bit to drill 30 mm-depth  guide holes on the ceiling. 
2.  Knock the plastic anchors into the guide holes, and fix the base plate onto the ceiling with ST3.5 screws.
3. Attach the camera to the base plate, and rotate the camera anticlockwise until it is blocked.

Startup

Connect one end of the power adapter to the power interface, and the other end to power supply to start up the camera. When the LED flashes red, it means the camera started up successfully. Then connect the camera to your network.

NOTE!
Do not use the camera in a humid environment. Please protect the camera from liquid of any kind.

Add Camera to App

NOTE!

• The camera can be added only on 2.4G Hz Wi-Fi network.
• It is recommended to sign up for an account before adding the camera.
• To add the camera without an account, please view tutorial at https://uniarch.cn/Support/FAQ/202212/958484_575360_0.htm

1. Download Uniarch
   Scan the QR code below (or search Uniarch in app stores) to download and install the Uniarch app.

2. Signup and login
   Sign up for an account and log in. If you already have an account, log in directly.

3. Add device

• Scan QR code
  Open the Uniarch app, tap Add Device > Scan, and scan the QR code on the camera body or on the quick guide, then follow the app wizard to add the camera.

• Add Wi-Fi device

NOTE!

• The following operations may be subject to change due to the upgrade of the app. If you find the descriptions inapplicable, please follow the in-app instructions.
• Please connect your mobile phone to the Wi-Fi in advance, and keep the mobile phone close to the camera.
• Do not use the network interface on your camera (if available); otherwise, Wi-Fi connection may fail.

1. Tap Add Wi-Fi Device, select The camera is waiting to be connected, and tap Next.
   

2. Tap to scan the register code on the quick guide or on the camera, and enter the Wi-Fi password. 

3. Option 1 : Connect Automatically: Tap Connect Automatically. A page as shown below appears. A success message appears when the camera is added successfully. If this option does not work, try option 2.
   

4. Option 2 : Connect Manually: Tap Connect Manually, follow on-screen instructions to scan the QR code with the camera, and then complete the remaining operations.

5. (Optional) To share the camera with others, tap in the upper right corner, tap Share, enter the accounts you want to share with, set valid period and permissions, and then tap Share. 

(Optional) Add Camera to NVR
Connect the camera to your NVR through LAN, then follow these steps to add the camera to your NVR.

1. Right-click in the preview window, click Menu > Camera > Camera.
2. Click Custom Add, enter the camera’s IP address and other information.
3. Check camera status. If is lit, the camera is online. If grayed out, place the mouse cursor on the icon to view failure information. Click the edit button to modify camera information.

NOTE!

• You can also click to add an IP device.
• To search devices in a specified network segment, click Search Segment.

(Optional) Web Access
Connect your camera and PC through LAN, then follow these steps to access your camera through the Web:

1. Open your Internet Explorer, enter the camera’s IP address (192.168.1.13 by default) in the address bar and then press Enter to open the login page.
2. Enter the username and password (admin/123456 by default) and then click Login.

NOTE!

• DHCP is enabled by default. If a DHCP server is used in your network, your camera may be assigned an IP address, and you need to use the assigned IP address to log in.
• You may need to install a plug-in at your first login (close all browsers during installation). Please follow the on-screen instructions to complete the installation and then open the browser again to log in.
• The default password is intended only for your first login . To ensure security, please change the password after your first login. You are strongly recommended to set a strong password of at least nine characters including all three elements: digits, letters and special characters.

Disclaimer and Safety Warnings

• Copyright Statement

  • No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from our company (referred to as us hereafter).
  • The product described in this manual may contain proprietary software owned by our company and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.

• Export Compliance Statement
  Our company complies with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, our company asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide.

• Privacy Protection Reminder
  Our company complies with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, GPS. Please abide by your local laws and regulations while using the product.

About This Manual

• This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product.
• This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.
• Despite our best efforts, technical or typographical errors may exist in this manual. Our company cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.
• Users are fully responsible for the damages and losses that arise due to improper operation.
• Our company reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.

Disclaimer of Liability

• To the extent allowed by applicable law, in no event will our company be liable for any special, incidental, indirect, consequential damages, nor for any loss of profits, data, and documents.
• The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
• Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus. We strongly recommend that users take all necessary measures to enhance the protection of network, device, data and personal information. Our company disclaims any liability related thereto but will readily provide necessary security related support.
• To the extent not prohibited by applicable law, in no event will our company and its employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if our company has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).
• To the extent allowed by applicable law, in no event shall our total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.

EU Authorised Representative

• UNV Technology EUROPE B.V. Room 2945, 3rd Floor, Randstad 21-05 G,1314 BD, Almere, Netherlands. Network Security
• Please take all necessary measures to enhance network security for your device.

The following are necessary measures for the network security of your device:

• Change default password and set strong password: You are strongly recommended to change the default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters.
• Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit our official website or contact your local dealer for the latest firmware.

The following are recommendations for enhancing network security of your device:

• Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device.
• Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security.
• Enable IP address filtering: Allow access only from the specified IP addresses.
• Minimum port mapping : Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT.
• Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access.
• Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked.
• Restrict user permissions : If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
• Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risks of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router.
• SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
• Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network.
• Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations.
• Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
• Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.

Safety Warnings

The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property.

Storage, Transportation, and Use

• Store or use the device in a proper environment that meets environmental requirements, including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
• Make sure the device is securely installed or placed on a flat surface to prevent falling.
• Unless otherwise specified, do not stack devices.
• Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.
• Protect the device from liquid of any kind.
• Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices.
• Verify that the device is properly installed before connecting it to power.
• Do not remove the seal from the device body without consulting our company first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.
• Always disconnect the device from power before attempting to move the device.
• Take proper waterproof measures in accordance with requirements before using the device outdoors. Power Requirements
• Install and use the device in strict accordance with your local electrical safety regulations.
• Use a UL certified power supply that meets LPS requirements if an adapter is used.
• Use the recommended cordset (power cord) in accordance with the specified ratings.
• Only use the power adapter supplied with your device.
• Use a mains socket outlet with a protective earthing (grounding) connection.
   Ground your device properly if the device is intended to be grounded.

Battery Use Caution

• When battery is used, avoid:
• Extremely high or low temperature and air pressure during use, storage and transportation;
• Battery replacement.
• Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.
• Replace battery with an incorrect type;
• Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;
• Dispose of the used battery according to your local regulations or the battery manufacturer’s instructions.

Regulatory Compliance

FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• LVD/EMC Directive
  This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.

• WEEE Directive–2012/19/EU
  The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.

• Battery Directive-2013/56/EC
  Battery in the product complies with the European Battery Directive 2013/56/EC. For proper recycling, return the battery to your supplier or to a designated collection point.

References

• Uniarch, Life in Focus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>