Uniarch 0235C8L2 Smart PT Wireless Camera User Guide
- August 20, 2024
- uniarch
Table of Contents
Uniarch 0235C8L2 Smart PT Wireless Camera
Packing List
NOTE
- indicates different camera models.
- Each package contains only one camera model.
- The following takes the dual-camera model as an example.
- The package contents may vary with the device model and version.
Appearance
NOTE
The appearance and interfaces are for illustrative purposes only. The
actual may vary with the device model.
Caution
Be sure to disconnect the power before inserting or removing the Micro SD card
(purchased separately); otherwise, it may be damaged.
NOTE
How to start a call?
Press the function button for 2s, and the call starts after a prompt tone.
How to end a call?
Press the function button again for 2s to end the call. The key function can
be configured in the App.
Mount Your Camera
- PT lens direction: It can be adjusted manually or by the PT control function in the app or Web interface.
- Fixed lens camera direction: It can only be adjusted manually.
Option 1: Place on the Desktop
NOTE
please place the device on the edge of a table or elevate the device to ensure
that the lens is not blocked.
Mount Your Camera
Option 2: Ceiling Mount
Device Management
Option 1: Manage on App
- Connect your mobile phone to the Wi-Fi network.
- Download and install the Uniarch app.
- Connect the device to power. When started up, the indicator will be blinking red.
- Follow the on-screen instructions to add and manage the device.
NOTE
- The actual operations may be slightly different. Please follow the instructions in the app.
- Do not connect the device with a network cable when managing the app.
Device Management
Option 2: Manage on Web
- Connect the device to power and a router using a network cable.
- Log in to the Web interface to add and manage the device.
Disclaimer and Safety Warnings
Copyright Statement
No part of this manual may be copied, reproduced, translated, or distributed
in any form or by any means without prior consent in writing from our company
(referred to as us hereafter). The product described in this manual may
contain proprietary software owned by our company and its possible licensors.
Unless permitted, no one is allowed to copy, distribute, modify, abstract,
decompile, disassemble, decrypt, reverse engineer, rent, transfer, or
sublicense the software in any form or by any means. Our company complies with
applicable export control laws and regulations worldwide, including those of
the People’s Republic of China and the United States, and abides by relevant
regulations relating to the export, re-export, and transfer of hardware,
software, and technology. Regarding the product described in this manual, our
company asks you to fully understand and strictly abide by the applicable
export laws and regulations worldwide.
Export Compliance Statement
About This Manual
Our company complies with appropriate privacy protection laws and is committed
to protecting user privacy. You may want to read our full privacy policy on
our website and get to know the ways we process your personal information.
Please be aware, that using the product described in this manual may involve
the collection of personal information such as face, fingerprint, license
plate number, email, phone number, and GPS. Please abide by your local laws
and regulations while using the product.
Privacy Protection Reminder
- This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product.
- This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.
- Despite our best efforts, technical or typographical errors may exist in this manual. Our company cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.
- Users are fully responsible for the damages and losses that arise due to improper operation.
- Our company reserves the right to change any information in this manual without any prior notice or indication.
- Due to such reasons as product version upgrades or regulatory requirements of relevant regions, this manual will be periodically updated.
Disclaimer of Liability
- To the extent allowed by applicable law, in no event will our company be liable for any special, incidental, indirect, or consequential damages, nor any loss of profits, data, and documents.
- The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purposes, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
- Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attacks, hacking, and viruses. We strongly recommend that users take all necessary measures to enhance the protection of networks, devices, data, and personal information. Our company disclaims any liability related thereto but will readily provide necessary security-related support.
EU Authorised Representative
UNV Technology EUROPE B.V. Room 2945,3rd Floor,Randstad 21-05 G,1314
BD,Almere,Netherlands.
Safety Warnings
The device must be installed, serviced, and maintained by a trained
professional with the necessary safety knowledge and skills. Before you start
using the device, please read through this guide carefully and make sure all
applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
- Store or use the device in a proper environment that meets environmental requirements, including not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
- Make sure the device is securely installed or placed on a flat surface to prevent falling.
- Unless otherwise specified, do not stack devices.
- To the extent not prohibited by applicable law, in no event will our company and its employees, licensors, subsidiary, and affiliates be liable for results arising out of using or inability to use the product or service, including, but not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however, caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if our company has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).
- To the extent allowed by applicable law, in no event shall our total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.
- Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.
- Protect the device from the liquid of any kind.
- Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices.
- Verify that the device is properly installed before connecting it to power.
- Do not remove the seal from the device body without consulting our company first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.
- Always disconnect the device from power before attempting to move the device.
- Take proper waterproof measures by requirements before using the device outdoors.
Power Requirements
- Install and use the device in strict accordance with your local electrical safety regulations.
- Use a UL-certified power supply that meets LPS requirements if an adapter is used.
- Use the recommended cordset (power cord) by the specified ratings.
- Only use the power adapter supplied with your device.
- Use a mains socket outlet with a protective earthing (grounding) connection.
- Ground your device properly if the device is intended to be grounded.
Battery Use Caution
When the battery is used, avoid:
- Extremely high or low temperature and air pressure during use, storage, and transportation
- Battery replacement.
- Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion, or leakage of flammable liquid or gas.
Replace the battery with an incorrect type
- Dispose of a battery in a fire or a hot oven, or mechanically crushing or cutting a battery;
- Dispose of the used battery according to your local regulations or the battery manufacturer’s instructions.
Regulatory Compliance
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) the device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution : The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
LVD/EMC/RE Directive
This product complies with the European Low Voltage Directive 2014/35/EU, EMC
Directive 2014/30/EU and RE Directive 2014/53/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of responsibly.
Battery Regulation- (EU) 2023/1542
The battery in the product complies with the European Battery Regulation (EU)
2023/1542. For proper recycling, return the battery to your supplier or a
designated collection point.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and any part of your body.
IC Statement
This device complies with the Innovation, Science and Economic Development
Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
Network Security
Please take all necessary measures to enhance network security for your
device. The following are necessary measures for the network security of your
device:
- Change the default password and set a strong password: You are strongly recommended to change the default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters, and special characters.
- Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit our official website or contact your local dealer for the latest firmware.
- The following are recommendations for enhancing the network security of your device:
- Change the password regularly: Change your device password regularly and keep the password safe.
- Make sure only the authorized user can log in to the device.
- Enable HTTPS/SSL: Use an SSL certificate to encrypt HTTP communications and ensure data security.
- Enable IP address filtering: Allow access only from the specified IP addresses.
- Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT.
- Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access.
- Choose a username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank, and email account information is leaked.
- Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
- Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risk of data leakage.
- Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router.
- SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
- Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network.
- Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations.
- Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
- Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.