uniarch 0235C8P2 Outdoor Dual Lens PT Wi-Fi Camera User Guide

: August 27, 2024
: uniarch

Table of Contents

uniarch 0235C8P2 Outdoor Dual Lens PT Wi-Fi Camera
What’s in the Box
Appearance
Device Management
Device Installation
Disclaimer and Safety Warnings
- Regulatory Compliance
Network Security
Read User Manual Online (PDF format)
Download This Manual (PDF format)

uniarch 0235C8P2 Outdoor Dual Lens PT Wi-Fi Camera

What’s in the Box

NOTE
The package contents may vary with the device model and version.

Appearance

Steady red: Connected to power
Blinking red: Resetting; the Wi-Fi connection failed
Steady blue: Connected to server; playing live video
Blinking blue: Connecting to the network

NOTE
The appearance and interfaces are for illustrative purposes only.

Device Management

Option 1: Connect to 2.4GHz Wi-Fi

Connect your mobile phone to the 2.4GHz Wi-Fi network.
Download and install the Uniarch app.
Follow the on-screen instructions to add and manage the device.

CAUTION

Connect Manually:
Tap Connect Manually, and then use the fixed lens to scan the QR code in the app.

Option 2: Connect to Wired Network

Connect to a router or switch
Log in to the Web interface.
- Default IP: 192.168.1.13
- Username: admin
- Password: 123456

NOTE
Do not connect the device with a network cable when connecting to Wi-Fi.

Device Installation

Install Micro SD Card

Make sure to power oﬀ the device before installation.
Rotate the PT camera downwards until the Micro SD card cover is fully exposed.
Use the Phillips screwdriver to loosen the screws on the cover and remove the cover.
Insert the Micro SD card into the slot.
Check that the sealing ring is in position.
Put the card cover back in place, and then tighten the screws.

NOTE
Press and hold the RST button for about 3 seconds to reset the device and make sure this operation is performed within 10 minutes after the device is connected to power.

CAUTION
Be sure to disconnect the power before inserting or removing the Micro SD card; otherwise, it may be damaged.

Mount Your Camera

Determine the mounting direction of the fixed lens.
Paste the drill template and drill holes.
Knock in plastic rivets.
Insert self-tapping screws.

NOTE

Fixed lens direction: It can only be adjusted manually.
PT lens direction: It can be adjusted manually or by the PTZ control function in the app or Web interface.

Waterproof Requirements
Please waterproof cables under the following instructions. Users shall assume all responsibility for device damage caused by water due to improper waterproof measures.

Disclaimer and Safety Warnings

Copyright Statement

No part of this manual may be copied, reproduced, translated, or distributed in any form or by any means without prior consent in writing from our company (referred to as us hereafter).
The product described in this manual may contain proprietary software owned by our company and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.

Export Compliance Statement
Our company complies with applicable export control laws and regulations worldwide, including those of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export, and transfer of hardware, software, and technology. Regarding the product described in this manual, our company asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide.

Privacy Protection Reminder
Our company complies with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, that using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, and GPS. Please abide by your local laws and regulations while using the product.

About This Manual

This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual, may be diﬀerent from the actual appearances, functions, features, etc, of the product.
This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be diﬀerent from the actual GUI and functions of the software.
Despite our best eﬀorts, technical or typographical errors may exist in this manual. Our company cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.
Users are fully responsible for the damages and losses that arise due to improper operation.
Our company reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrades or regulatory requirements of relevant regions, this manual will be periodically updated.

Disclaimer of Liability

To the extent allowed by applicable law, in no event will our company be liable for any special, incidental, indirect, or consequential damages, nor any loss of profits, data, and documents.
The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purposes, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attacks, hacking, and viruses. We strongly recommend that users take all necessary measures to enhance the protection of networks, devices, data, and personal information. Our company disclaims any liability related thereto but will readily provide necessary security-related support.
To the extent not prohibited by applicable law, in no event will our company and its employees, licensors, subsidiary, aﬀiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however, caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if our company has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).
To the extent allowed by applicable law, in no event shall our total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.

EU Authorised Representative
UNV Technology EUROPE B.V. Room 2945,3rd Floor,Randstad 21-05 G,1314 BD,Almere,Netherlands.

Safety Warnings
The device must be installed, serviced, and maintained by a trained professional with the necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property.

Storage, Transportation, and Use

Store or use the device in a proper environment that meets environmental requirements, including but not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
Make sure the device is securely installed or placed on a flat surface to prevent falling.
Unless otherwise specified, do not stack devices.
Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.
Protect the device from the liquid of any kind.
Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices.
Verify that the device is properly installed before connecting it to power.
Do not remove the seal from the device body without consulting our company first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.
Always disconnect the device from power before attempting to move the device.
Take proper waterproof measures by requirements before using the device outdoors.

Power Requirements

Install and use the device in strict accordance with your local electrical safety regulations.
Use a UL-certified power supply that meets LPS requirements if an adapter is used.
Use the recommended cordset (power cord) by the specified ratings.
Only use the power adapter supplied with your device.
Use a mains socket outlet with a protective earthing (grounding) connection.
Ground your device properly if the device is intended to be grounded.

Battery Use Caution

When the battery is used, avoid:
Extremely high or low temperature and air pressure during use, storage, and transportation; Battery replacement.
Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion, or leakage of flammable liquid or gas.
Replace the battery with an incorrect type;
Dispose of a battery in a fire or a hot oven, or mechanically crushing or cutting a battery;
Dispose of the used battery according to your local regulations or the battery manufacturer’s instructions.

Regulatory Compliance

FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

LVD/EMC/RE Directive
This product complies with the European Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and RE Directive 2014/53/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of responsibly.
Battery Regulation- (EU) 2023/1542
The battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or a designated collection point.

IC Statement
This device complies with the Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Network Security

Please take all necessary measures to enhance network security for your device.

The following are necessary measures for the network security of your device:

Change the default password and set a strong password: You are strongly recommended to change the default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters, and special characters.
Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit our oﬀicial website or contact your local dealer for the latest firmware.

The following are recommendations for enhancing the network security of your device:

Change the password regularly: Change your device password regularly and keep the password safe. Make sure only the authorized user can log in to the device.
Enable HTTPS/SSL: Use an SSL certificate to encrypt HTTP communications and ensure data security.
Enable IP address filtering: Allow access only from the specified IP addresses.
Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT.
Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access.
Choose a username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank, and email account information is leaked.
Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risk of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router.
SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network.
Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations.
Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.